Publications related to Pore Size Manipulation in 3D Printed Cryogels Enables Selective Cell Seeding

Large-Scale Hollow-Core 3D Printing: Variable Cross-Section and Printing Features for Lightweight Plastic Elements

Hollow-core 3D printing (HC3DP) proposes a new method for the production of lightweight, material-efficient thermoplastic 3D printed elements. This new fabrication approach promises material savings of 50-80%, while increasing the extrusion rate significan ...

Mary Ann Liebert, Inc2024

Volumetric additive manufacturing in a scattering resin

Jorge Andres Madrid Wolff

Volumetric 3D printing is a novel technique that offers promising new perspectives in tissue engineering. In volumetric 3D printing, photosensitive gels or liquids are solidified by projecting light patterns via reverse tomography. Recent results show that ...

EPFL2023

Nanoliter Liquid Packaging in a Bioresorbable Microsystem by Additive Manufacturing and its Application as a Controlled Drug Delivery Device

Arnaud Bertsch, Jürgen Brugger, Cristina Martin Olmos, Jongeon Park

Precise packaging of nanoliter amounts of liquid in a microsystem is important for many biomedical applications. However, existing liquid encapsulation technologies have limitations in terms of liquid waste, evaporation, trapped bubbles, and liquid degrada ...

2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Deep Learning for 3D Surface Modelling and Reconstruction

Benoît Alain René Guillard

In recent years, there has been a significant revolution in the field of deep learning, which has demonstrated its effectiveness in automatically capturing intricate patterns from large datasets. However, the majority of these successes in Computer Vision ...

EPFL2023

Actuated 3D microgels for single cell mechanobiology

Christina Myra Tringides, Mahmut Selman Sakar, Ece Özelçi, Berna Ayse Özkale Edelmann

We present a new cell culture technology for large-scale mechanobiology studies capable of generating and applying optically controlled uniform compression on single cells in 3D. Mesenchymal stem cells (MSCs) are individually encapsulated inside an optical ...

ROYAL SOC CHEMISTRY2022

Fast 3D Modeling of Prosthetic Robotic Hands Based on a Multi-Layer Deformable Design

Daniel Thalmann

Current research of designing prosthetic robotic hands mainly focuses on improving their functionality by devising new mechanical structures and actuation systems. Most of existing work relies on a single structure/system (e.g., bone-only or tissue-only) a ...

WHIOCE PUBLISHING PTE LTD, SINGAPORE2022

Bragg edge tomography characterization of additively manufactured 316L steel

Christian Leinenbach, Roland Logé, Nikola Kalentics, Efthymios Polatidis, Markus Strobl

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

3D printing of elastomeric mechanical sensors designed for human motion monitoring

Ryan Mitchell van Dommelen

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Towards an in vitro cardiac model: 3D environment, co-culture, alignment, and mechanical stimulation impact on cell behavior

Fatemeh Navaee

Our aim is to develop a 3D model unit of cardiac muscle: an in-vitro analog of the trabeculae carneae found in vivo. As a base hydrogel matrix for cardiomyocyte culture in 3D, we develop a blend of decellularized extracellular matrix (dECM) and fibrin. Thi ...

EPFL2021

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

Christian Leinenbach, Roland Logé, Nikola Kalentics, Markus Strobl

Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is pro ...

ELSEVIER2021

Reusable support for additive manufacturing

Additive manufacturing (AM) processes such as material extrusion and vat photopolymerization all require supports to print parts with overhang features. These additional supports using the same or different materials are a waste of materials since they nee ...

2021

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

Bioprinting of Cartilaginous Auricular Constructs Utilizing an Enzymatically Crosslinkable Bioink

Philipp Fisch, Nicolas Antoine Vincent Broguiere

Bioprinting of functional tissues could overcome tissue shortages and allow a more rapid response for treatments. However, despite recent progress in bioprinting, and its outstanding ability to position cells and biomaterials in a precise 3D manner, its su ...

WILEY-V C H VERLAG GMBH2021

Tandem electrospinning for heterogeneous nanofiber patterns

Silvestro Micera

Smart nanofibrillar constructs can be a promising technological solution for many emerging and established fields, facilitating the potential impact of nano-scale strategies to address relevant technological challenges. As a fabrication technique, electros ...

IOP PUBLISHING LTD2020

Grayscale e-beam lithography: Effects of a delayed development for well-controlled 3D patterning

Henning Paul-Julius Stahlberg

Grayscale electron beam lithography (g-EBL) is a fabrication technique that allows for tunable control of resist topography. In most cases, the height of the structures is in the submicron regime. Here, we present an extensive experimental characterization ...

2020

A model for 3D deformation and reconstruction of contractile microtissues

Mahmut Selman Sakar, Erik Mailand, Nikolaos Bouklas, Jaemin Kim

Tissue morphogenesis and regeneration are essentially mechanical processes that involve coordination of cellular forces, production and structural remodeling of extracellular matrix (ECM), and cell migration. Discovering the principles of cell–ECM interact ...

2020

3D Printed Micro-Scaffolds Loaded by Inkjet Printing With in-Precise Amount of Drug

Jürgen Brugger, Christopher Chi Wai Tse, Jongmoon Jang, Fengyi Zheng

We propose a novel combination of two-photon polymerization (2PP) three-dimensional (3D) micro-manufacturing with drop-on-demand inkjet printing (DOD IJP) to fabricate 3D microporous scaffolds embedded with minute quantities of releasable drug. We designed ...

IEEE2020

Extracellular Matrix Production by Mesenchymal Stromal Cells in Hydrogels Facilitates Cell Spreading and Is Inhibited by FGF-2

Martin Ehrbar, Queralt Vallmajó Martín

In native tissues, the interaction between cells and the surrounding extracellular matrix (ECM) is reciprocal, as cells not only receive signals from the ECM but also actively remodel it through secretion of cell-derived ECM. However, very little is known ...

2020