Publications related to Inter-Plane Communication Methods for 3-D ICs

Sensitivity Analysis of the Lumped Thermal Model of the EU 170 GHz Gyrotron Magnetron Injection Gun

The ITER Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) system relies on 1 MW 170 GHz Gyrotrons to provide the mm-wave power needed for plasma heating, current drive, and magneto-hydrodynamic control. The design and modeling of the contro ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Thermal conductivity of Li 3 PS 4 solid electrolytes with ab initio accuracy

Michele Ceriotti, Federico Grasselli

The vast amount of computational studies on electrical conduction in solid-state electrolytes is not mirrored by comparable efforts addressing thermal conduction, which has been scarcely investigated despite its relevance to thermal management and (over)he ...

Amer Physical Soc2024

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Christophe Marcel Georges Galland, Sakthi Priya Amirtharaj, Wen Chen, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Stable cones in the thin one-phase problem

Xavier Fernandez-Real Girona

The aim of this work is to study homogeneous stable solutions to the thin (or fractional) one -phase free boundary problem. The problem of classifying stable (or minimal) homogeneous solutions in dimensions n >= 3 is completely open. In this context, axial ...

Johns Hopkins Univ Press2024

Design and Development of a Diagnostic System for a Non-Intercepting Direct Measure of the SPIDER Ion Source Beamlet Current

Stable and uniform beams with low divergence are required in particle accelerators; therefore, beyond the accelerated current, measuring the beam current spatial uniformity and stability over time is necessary to assess the beam performance, since these pa ...

MDPI2023

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Aïcha Hessler-Wyser, Franz-Josef Haug, Luca Massimiliano Antognini, Julien Hurni, Ezgi Genç, Sofia Libraro, Audrey Marie Isabelle Morisset

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Beam homogeneity of caesium seeded SPIDER using a direct beamlet current measurement

The ITER Heating Neutral Beam (HNB) source prototype SPIDER (Source for the Production of Ions of Deuterium Extracted from a Radio frequency plasma), hosted at the Neutral Beam Test Facility (NBTF) in Padova, Italy, has recently started operating with evap ...

ELSEVIER SCIENCE SA2023

Analysis and Design for Medium Voltage Dual Active Bridge Converter Based on Series-Connected SiC MOSFETs

Heng Fang, Rui Lu, Chengmin Li

In this article, a series-connected SiC MOSFETs-based medium voltage (MV) dual active bridge (DAB) converter featuring a lowvoltage difference amongdevices and high efficiency is proposed. In the developed DAB converter, the zero voltage switching-on chara ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Emergent non-Hermitian localization phenomena in the synthetic space of zero-dimensional bosonic systems

Fabrizio Minganti

Phase transitions in non-Hermitian systems are at the focus of cutting edge theoretical and experimental research. On the one hand, parity-time- (PT-) and anti-PT-symmetric physics have gained ever-growing interest, due to the existence of non-Hermitian sp ...

AMER PHYSICAL SOC2023

Effect of a temperature gradient on the screening properties of ionic fluids

Andrea Grisafi, Federico Grasselli

The electrostatic screening properties of ionic fluids are of paramount importance in countless physical processes. Yet the screening behavior of ionic conductors out of thermal equilibrium has to date mainly been studied in the context of thermoelectric p ...

AMER PHYSICAL SOC2023

Method and setup for light detection and ranging

Tobias Kippenberg, Anton Lukashchuk

A method and a setup for light detection and ranging are disclosed. The setup is configured to carry out the following method: generating signal radiation (S) at multiple signal frequencies (fs) with an optical signal source (1), wherein the signal radiati ...

2023

Performance evaluation and the implementation of the turbocharger, fuel cell, and battery in Unmanned Aerial Vehicles (UAVs)

Jan Van Herle, Hossein Pourrahmani

The current study evaluates integrating fuel cell technology into the batteries as an alternative for internal combustion engines (ICEs) for Unmanned Aerial Vehicles (UAV). To further improve the performance of the UAV, a turbocharger is also integrated to ...

Elsevier2023

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach, Thomas Mayer, Rafal Wróbel

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...

2023

One-Dimensional "Ghost Imaging" in Electron Microscopy of Inelastically Scattered Electrons

Fabrizio Carbone, Ivan Madan, Giovanni Maria Vanacore, Ido Kaminer, Ebrahim Karimi, Simone Gargiulo

Entanglement and correlation are at the basis of quantummechanicsand have been used in optics to create a framework for "ghostimaging". We propose that a similar scheme can be used in anelectron microscope to exploit the correlation of electrons with theco ...

2023

Experimental study of the hydrodynamic and thermal performances of ventilated wall structures

Mohammad Rahiminejad, Dolaana Khovalyg

The presence of a ventilated air gap behind the external cladding in a building envelope is known to have a tangible contribution to the overall performance of the wall assembly. In the present study, the hydrodynamic and thermal performances of ventilated ...

2023

Thermal management for gas lubricated, high-speed turbomachinery

Jürg Alexander Schiffmann, Luis Eric Olmedo Ocampo, Wei Liu, Wanhui Liu

High-speed turbomachinery is commonly designed to achieve high power densities. Limited space for active cooling results in a challenging thermal management. A thermal modeling approach leveraging modern declarative programming capabilities is presented, y ...

2023

Self-sustained dynamics and forced resonant oscillations in flows: cross-junction jets and sloshing liquids

Alessandro Bongarzone

In engineering, oscillatory instabilities and resonances are often considered undesirable flow features and measures are taken to avoid them. This may include avoiding certain parametric regions or implementing control and mitigation strategies. However, t ...

EPFL2023