Publications related to Design of Compact Air-Vias-Perforated SIW Horn Antenna With Partially Detached Broad Walls

Enabling Wide Bandwidth in Substrate-Integrated Waveguide Slot Antennas by Using Low-Index Metamaterials

Romain Christophe Rémy Fleury, Jalaledin Tayebpour, Amir Jafargholi

This paper presents a solution to overcome the inherently limited bandwidth of substrate-integrated waveguide (SIW) slot antennas. It is analytically shown that by decreasing the permittivity of a dielectric loaded slot antenna, the resulting bandwidth inc ...

American Physical Society (APS)2024

Code for project entitled "study on conformal antennas, proof of concept prototype for a UAV"

Anja Skrivervik, Yuanyan Su

This code is used for developing the project entitled “Study on conformal antennas, proof of concept prototype for a UAV”, from the aspects of theory, design, and implementation. This code aims to speed up the investigation of an arbitrary phased array ant ...

Zenodo2024

A mmWave Low Complexity and Low-Cost Super Wideband Dual-Polarized Aperture Coupled Antenna for 5G Applications

Anja Skrivervik, Abolfazl Azari

Advanced antenna system (AAS) is a viable option for 5G millimeter-wave (mmWave) applications. AAS single element is favored to be dual-polarized, wideband, high gain, and compact in order to be utilized for 5G antenna arrays. In this paper, a low complexi ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Christophe Marcel Georges Galland, Sakthi Priya Amirtharaj, Wen Chen, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

A Two-Wired High Input Impedance and High CMRR Active Electrode Insensitive to Component Mismatch

Alexandre Schmid, Mehdi Saberi

This article proposes a new two-wired amplifying active electrode (AE), presenting a high input impedance and a high common-mode rejection ratio (CMRR). In the proposed structure, the input impedance and the CMRR of the system are considerably increased by ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Dual-Polarized SIW Slot Antenna Using ENZ Metamaterial for 5G and mmWave Applications

Romain Christophe Rémy Fleury, Amir Jafargholi

This paper presents a broadband dual-polarized substrate integrated waveguide (SIW) slot antenna. It is analytically shown that by decreasing the permittivity of a dielectricloaded slot antenna, the resulting bandwidth increases significantly, where the wi ...

IEEE2023

Small antennas with broad beamwidth integrated on a drone enclosed in a protective structure

Anja Skrivervik, Ismael Vico Triviño

In this paper, we analyze the integration of small antennas in a drone protected by a conductive structure. They must be light and resistant to provide high collision resilience, which is critical for drones flown indoors and in complex environments. To ac ...

IEEE2023

NbN films with high kinetic inductance for high-quality compact superconducting resonators

Edoardo Charbon, Simone Frasca, Pasquale Scarlino, Vincent Jean Yves Jouanny, Fabian Oppliger, Fabrizio Minganti, Marco Scigliuzzo, Roberto Musio

Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as it shows the degree of reproducibility necessary for large-scale superconducting circuits. We demonstrate that resonators based on NbN thin films present a o ...

American Physical Society (APS)2023

Circularly polarized planar antenna with axially symmetric beamwidth reconfigurability

Anja Skrivervik, Ismael Vico Triviño, Hannes Bartle

This contribution presents the design of a compact circularly polarized antenna featuring beamwidth reconfiguration in both the horizontal and vertical planes. The observed radiation patterns in each of the reconfigurable states present axial symmetry and ...

IEEE2023

Analytic Approximation of In-Body Path Loss for Implanted Antennas

Anja Skrivervik, Mingxiang Gao, Zvonimir Sipus

Implantable bioelectronic devices predominantly use wireless links for communication and/or power transfer. When considering transmitting implanted antennas, electromagnetic radiation through biological media is highly attenuated, and previous work has sho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Q-Factor Bounds for Microstrip Patch Antennas

Anja Skrivervik

Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Evaluation of a New Process for the Additive Manufacturing of Metal Antennas

German Augusto Ramirez Arroyave

This paper presents a new process for additively manufacturing purely metallic antennas based on Fused Deposition Modeling (FDM), with a proprietary filament developed using a hot extrusion method and composed by a mix of rounded shape copper powders with ...

2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Time-Domain Integration of Broadband Terahertz Pulses via Tapered Two-Wire Waveguide

Alessandro Tomasino

In this work, we report on the implementation of a time-domain integrator device operating on arbitrary broadband Terahertz (THz) pulses. This analog signal-processing functionality is implemented by employing a two-wire waveguide (TWWG) variant, based on ...

IEEE2023

Radiation Patterns of RF Wireless Devices Implanted in Small Animals: Unexpected Deformations Due to Body Resonance

Anja Skrivervik, Stéphanie Lacour, James Daniel Rosenthal, Mingxiang Gao, Kangling Wu, Zvonimir Sipus, German Augusto Ramirez Arroyave

One challenge in designing RF wireless bioelectronic devices is the impact of the interaction between electromagnetic waves and host body tissues on far-field wireless performance. In this paper, we investigate a peculiar phenomenon of implantable RF wirel ...

2023

A New Analytical Approximation of the Fluid Antenna System Channel

Malek Khammassi

Fluid antenna systems (FAS) are an emerging technology that promises a significant diversity gain even in the smallest spaces. It consists of a freely moving antenna in a small linear space to pick up the strongest received signal. Previous works in the li ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Distributional Regression and Autoregression via Optimal Transport

Laya Ghodrati

We present a framework for performing regression when both covariate and response are probability distributions on a compact and convex subset of

\R^d

. Our regression model is based on the theory of optimal transport and links the conditional Fr'echet m ...

EPFL2023

Compact, Spatial-mode-interaction-free, Ultralow-loss, Nonlinear photonic integrated circuits

Rui Ning Wang, Tobias Kippenberg, Junqiu Liu, Jijun He, Xinru Ji, Zheru Qiu

We implement Euler bends to build compact high-Q Si3N4 racetrack microresonators, featuring a small footprint of only 0.21 mm(2) for 19.8 GHz FSR. We demonstrate that these multi-mode microresonators can be operated in the single-mode regime and generate a ...

IEEE2022