Publications related to Capacités variables et inductances MEMS RF pour une intégration "Above-IC"

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

3D Printing of Customizable Transient Bioelectronics and Sensors

Danick Briand, Nicolas Francis Fumeaux

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

Zhenyu Wang

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Eco-Conscious Approach to Wireless Gas Monitoring With a Hybrid Printed Passive Sensor Tag

Sandro Carrara, Johanna Zikulnig, Jürgen Kosel

Addressing the environmental impact of electronic waste in biomedical sensing, an eco-conscious approach to the realization of a Chitosan-based Acetone sensor tag for wireless gas monitoring is presented. The fabrication involves inkjet printing of silver ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Enabling Wide Bandwidth in Substrate-Integrated Waveguide Slot Antennas by Using Low-Index Metamaterials

Romain Christophe Rémy Fleury, Jalaledin Tayebpour, Amir Jafargholi

This paper presents a solution to overcome the inherently limited bandwidth of substrate-integrated waveguide (SIW) slot antennas. It is analytically shown that by decreasing the permittivity of a dielectric loaded slot antenna, the resulting bandwidth inc ...

American Physical Society (APS)2024

An Ultralow-Power Triaxial MEMS Accelerometer With High-Voltage Biasing and Electrostatic Mismatch Compensation

Yimai Peng, Li Xu, Kyojin Choo

This article presents a triaxial micro electromechani-cal system (MEMS) capacitive accelerometer using a high-voltage biasing technique to achieve high resolution with ultralow power. The accelerometer system generates a differential pair of high voltages ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Thermo-optic epsilon-near-zero effects

Camille Sophie Brès, Qian Li, Jiaye Wu, Marco Clementi

Nonlinear epsilon-near-zero (ENZ) nanodevices featuring vanishing permittivity and CMOS-compatibility are attractive solutions for large-scale-integrated systems-on-chips. Such confined systems with unavoidable heat generation impose critical challenges fo ...

Nature Portfolio2024

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Ekin Kizilkan

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...

EPFL2024

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

3D diffractive optics for linear interconnects and nonlinear processing

Niyazi Ulas Dinç

The optical domain presents potential avenues for enhancing both computing and communication due to its inherent properties of bandwidth, parallelism, and energy efficiency. This research focuses on harnessing 3-Dimensional (3D) diffractive optics for nove ...

EPFL2024

Hydrogen-induced tunable remanent polarization in a perovskite nickelate

Michele Kotiuga

Materials with field-tunable polarization are of broad interest to condensed matter sciences and solid-state device technologies. Here, using hydrogen (H) donor doping, we modify the room temperature metallic phase of a perovskite nickelate NdNiO3 into an ...

Nature Portfolio2024

Room-temperature quantum optomechanics using an ultralow noise cavity

Tobias Kippenberg, Nils Johan Engelsen, Alberto Beccari, Guanhao Huang

At room temperature, mechanical motion driven by the quantum backaction of light has been observed only in pioneering experiments in which an optical restoring force controls the oscillator stiffness1,2. For solid-state mechanical resonators in which oscil ...

Nature Portfolio2024

Graph generative deep learning models with an application to circuit topologies

Igor Krawczuk

Modern integrated circuits are tiny yet incredibly complex technological artifacts, composed of millions and billions of individual structures working in unison. Managing their complexity and facilitating their design drove part of the co-evolution of mode ...

EPFL2024

Contemporary Logic Synthesis: with an Application to AQFP Circuit Optimization

Siang-Yun Lee

Electronic devices play an irreplaceable role in our lives. With the tightening time to market, exploding demand for computing power, and continuous desire for smaller, faster, less energy-consuming, and lower-cost chips, computer-aided design for electron ...

EPFL2024

Energy-Efficient Electronic Functions Based on the Co-integration of 2D and Ferroelectric Materials

Sadegh Kamaei Bahmaei

The digital revolution has significantly transformed our world over the past decades, driven by the scaling of transistor dimensions and the exponential increase in computation power. However, as the CMOS scaling era approaches its end, the semiconductor i ...

EPFL2023

Front-End Circuits for Radiation-Hard Monolithic CMOS Sensors targeting High-Energy Physics Applications

Francesco Piro

Monolithic pixel sensors integrate the sensor matrix and readout in the same silicon die, and therefore present several advantages over the more largely used hybrid detectors in high-energy physics. They offer an easier detector assembly, lower cost, lower ...

EPFL2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Integrated silicon photonic MEMS

Niels Quack, Hamed Sattari, Alain Yuji Takabayashi

Silicon photonics has emerged as a mature technology that is expected to play a key role in critical emerging applications, including very high data rate optical communications, distance sensing for autonomous vehicles, photonic-accelerated computing, and ...

SPRINGERNATURE2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023