Publication

Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading

Aurelio Muttoni, Miguel Fernández Ruiz, Juan Sagaseta Albajar
2014
Reviews

Abstract

Reinforced concrete flat slab structures are used widely in construction projects due to their economic and functional advantages. Punching shear failure in such structures can have catastrophic effects in the case of, for example, multi-storey framed structures and the designer aims to ensure that ductile flexural deformation occurs before the brittle shear failure. Shear mechanisms generally govern the behaviour of reinforced concrete structures subjected to localised impact loads. Existing experimental results investigating punching shear in flat slabs subjected to impact loading shows that when increasing the loading rate, the punching shear strength also increases whereas the deformation capacity reduces. This behaviour is due to a combination of inertial effects and material strain-rate effects which leads to a stiffer behaviour of the slab for higher loading rates. This can also lead to a change of mode of failure from flexural to pure punching shear with increasing loading rates. Current empirical formulae for punching shear are unable to predict this behaviour since the slab deformations are not considered for calculating the punching shear strength. This paper presents an analytical model based on the Critical Shear Crack Theory which can be applied to flat slabs subjected to impact loading. This model is particularly useful for cases such as progressive collapse analysis and flat slab-column connections subjected to an impulsive axial load in the column. The novelty of the approach is that it considers (a) the dynamic punching shear capacity and (b) the dynamic shear demand, both in terms of the slab deformation (slab rotation). The model considers inertial effects and material strain-rate effects although it is shown that the former has a more significant effect. Moreover, the model allows a further physical understanding of the phenomena and it can be applied to different cases (slabs with and without transverse reinforcement) showing a good correlation with experimental data. (C) 2014 Published by Elsevier Ltd.

Official source

Aurelio Muttoni, Miguel Fernández Ruiz, Juan Sagaseta Albajar
2014
Reviews

Abstract

Official source

Related concepts (32)

Concrete slab

A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel-reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ceilings, while thinner mud slabs may be used for exterior paving . In many domestic and industrial buildings, a thick concrete slab supported on foundations or directly on the subsoil, is used to construct the ground floor. These slabs are generally classified as ground-bearing or suspended.

Rebar

Rebar (short for reinforcing bar), known when massed as reinforcing steel or reinforcement steel, is a steel bar used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression, but has low tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar's surface features a continuous series of ribs, lugs or indentations to promote a better bond with the concrete and reduce the risk of slippage.

Concrete

Concrete is a composite material composed of aggregate bonded together with a fluid cement that cures over time. Concrete is the second-most-used substance in the world after water, and is the most widely used building material. Its usage worldwide, ton for ton, is twice that of steel, wood, plastics, and aluminium combined. When aggregate is mixed with dry Portland cement and water, the mixture forms a fluid slurry that is easily poured and molded into shape.

Related publications (30)

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Experimental investigation of dowel action in reinforcing bars using refined measurements

Aurelio Muttoni, Marko Pejatovic

In typical reinforced concrete design, reinforcement is designed to carry axial forces, but it can also resist transversal forces by dowel action. This is usually neglected for simplicity's sake in the design phase, but it can be accounted for either expli ...

Ernst & Sohn2024