Publications related to Post-Sputtering Heat Treatments of Molybdenum on Silicon Wafer

Towards Scalable Electronics: Synthetic 2D Materials for Large-Area 2D Circuit Integration

In the past decades, a significant increase of the transistor density on a chip has led to exponential growth in computational power driven by Moore's law. To overcome the bottleneck of traditional von-Neumann architecture in computational efficiency, effo ...

EPFL2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Vacancy segregation and intrinsic coordination defects at (111) twist grain boundaries in diamond

Christian Brandl, Carolina Baruffi

High radiation damage resistance has become increasingly important for applications of functional materials in harsh environments. The high radiation damage resistance diamond cubic carbon is a unique material which is considered for radiation environments ...

Pergamon-Elsevier Science Ltd2023

Tensile and creep-rupture response of additively manufactured nickel-based superalloy CM247LC

Christian Leinenbach, Rafal Wróbel

Tensile and creep rupture properties of crack-free CM247LC alloy, processed via laser powder bed fusion, have been characterised in this work at temperatures up to 1000 & DEG;C. The subject alloy matches or even exceeds the tensile performance of its direc ...

ELSEVIER2023

GeSn as next-generation material for short-wave infrared single-photon detection

Andrea Giunto

In recent years, the automotive industry has aspired to bring self-driving vehicles to the general public and light detection and ranging (LiDAR) sensors have emerged as the preferred solution for car vision systems. At present, LiDAR technologies employ e ...

EPFL2023

Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy

Cyril Cayron, Roland Logé, Aryan Rezaei Rad

Two severe plastic deformation (SPD) techniques of simple shear extrusion (SSE) and equal channel angular pressing (ECAP) were employed to process an extruded Mg -6Gd -3Y -1.5Ag (wt%) alloy at 553 K for 1, 2, 4 and 6 passes. The microstructural evolutions ...

KEAI PUBLISHING LTD2023

Rapid grain boundary diffusion in foraminifera tests biases paleotemperature records

Lukas Baumgartner, Anders Meibom, Jaroslaw Hubert Stolarski, Arthur Adams, Deyanira Graciela Cisneros Lazaro, Jinming Guo

The paleoseawater temperature record from the oxygen isotope compositions of fossil foraminifera tests may be biased by up to about 1 degrees C due to grain-boundary diffusion alone, according to isotope exchange experiments on foraminifera tests. The oxyg ...

2023

The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys

William Curtin, Carolina Baruffi, You Rao

Mo-Ti alloys form solid solutions over a wide range of compositions, with lattice misfit parameters increasing significantly with titanium content. This indicates a strong increase in the critical stress for edge dislocation motion. Here, we probe the tran ...

SPRINGERNATURE2023

Atomic scale volume and grain boundary diffusion elucidated by in situ STEM

Johann Michler, Amit Sharma, Laszlo Pethö, Xavier Maeder

Diffusion is one of the most important phenomena studied in science ranging from physics to biology and, in abstract form, even in social sciences. In the field of materials science, diffusion in crystalline solids is of particular interest as it plays a p ...

Nature Portfolio2023

Three-dimensional in situ imaging of single-grain growth in polycrystalline In2O3:Zr films

Quentin Thomas Jeangros, Michael Elias Stückelberger, Monica Morales Masis

Understanding grain morphology and kinetics of solid-phase crystallization is important for controlling the functional properties of polycrystalline materials. Here, in situ coherent X-ray diffraction imaging and transmission electron microscopy elucidate ...

SPRINGERNATURE2022

Investigation in Crystal Growth/Morphology and Interface Engineering of Perovskite Solar Cells by Different Deposition Methods

Nadja Isabelle Desiree Klipfel

A new and promising technology has emerged to compete with traditional silicon photovoltaic semiconductors. The low material and processing costs and high-power conversion efficiencies of organic-inorganic metal halide perovskites make these a promising te ...

EPFL2022

Processability, microstructure and precipitation of a Zr-modified 2618 aluminium alloy fabricated by laser powder bed fusion

Christian Leinenbach, Xavier Maeder

Additive manufacturing offers the opportunity to produce complex geometries from novel alloys with improved properties. Adapting conventional alloys to the process-specific properties can facilitate rapid implementation of these materials in industrial pra ...

2022

Material Development for Perovskite/Silicon Tandem Photovoltaics

Peter Joseph Fiala

The developed world is built on the fact that energy is readily available and functionally infinite. The electricity from the wall, the gas at the station, and the heat in our homes are reliable and low-cost. But this comfort is so far only possible throug ...

EPFL2022

Skyrmion Control and Phase Transitions in Cu2OSeO3

Thomas Schönenberger

Magnetic skyrmions are nanometric and non-trivial spin textures with non-zero topological charge. Their robustness against perturbations and the possibility to control them using external stimuli make them ideal candidates for future spintronic application ...

EPFL2022

Effect of Y2O3 dispersoids on microstructure and creep properties of Hastelloy X processed by laser powder-bed fusion

Christian Leinenbach

Laser powder bed fusion (LPBF) was used to consolidate powders of a Ni-Cr-Fe-Mo alloy (Hastelloy X) blended with 1 wt% Y2O3 nanometric powders. The nearly-dense, crack-free specimens, with and without oxide dispersion strengthening (ODS), exhibit high-aspe ...

ELSEVIER2022

Demonstrating and Unraveling a Controlled Nanometer-Scale Expansion of the Vacancy Defects in Graphene by CO2

Kumar Varoon Agrawal, Luis Francisco Villalobos Vazquez de la Parra, Kuang-Jung Hsu

A controlled manipulation of graphene edges and vacancies is desired for molecular separation, sensing and electronics applications. Unfortunately, available etching methods always lead to vacancy nucleation making it challenging to control etching. Herein ...

Wiley-VCH Verlag GmbH2022

Disorder-induced electronic, magnetic, and optoelectronic properties of two-dimensional materials

Cheol Yeon Cheon

Technological advancement has been in cadence with material development by improving the purity of single crystals and, at the same time, controlling their imperfections. These capabilities have been especially vital for developing new technolo-gies based ...

EPFL2022

Bifunctional additive 2-amino-3-hydroxypyridine for stable and high-efficiency tin-lead perovskite solar cells

Keith Gregory Brooks, Mohammad Khaja Nazeeruddin, Yi Zhang, Bing Zhang

Tin-lead (Sn-Pb) mixed perovskite has received widespread attention due to its suitable band gap width and high optical absorption coefficients. However, the power conversion efficiency (PCE) of Sn-Pb mixed perovskite solar cells (PSCs) is still low due to ...

Royal Society of Chemistry2022

Ultrafast photo-induced phonon hardening due to Pauli blocking in MAPbI(3) single-crystal and polycrystalline perovskites

Feliciano Giustino, Samuel Poncé

Metal-halide perovskite semiconductors have attracted intense interest over the past decade, particularly for applications in photovoltaics. Low-energy optical phonons combined with significant crystal anharmonicity play an important role in charge-carrier ...

IOP PUBLISHING LTD2021

On the structure of (111) twist grain boundaries in diamond: atomistic simulations with Tersoff-type interatomic potentials

Carolina Baruffi

In nanocrystalline diamond thin films, the high grain boundary density and the associated grain boundary properties may dominate the overall material behavior. In the present work, we systematically investigate (111) twist grain boundaries in diamond carbo ...

PERGAMON-ELSEVIER SCIENCE LTD2021