Publications related to Method and Apparatus for Generating Digital Halftone Images by Using Multi Color Dithering

3D Printing of Customizable Transient Bioelectronics and Sensors

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Accurate color characterization of solar photovoltaic modules for building integration

Christophe Ballif, Antonin Faes, Jordi Escarre Palou, Alessandro Francesco Aldo Virtuani, Alejandro Borja Block

Accurate and reproducible color characterization is essential for colored building integrated photovoltaic products, both for manufacturing quality control and assessing long-term color stability. However, existing characterization techniques struggle to a ...

Pergamon-Elsevier Science Ltd2023

Seeing Photons in Color

Claudio Bruschini, Edoardo Charbon, Paul Mos, Mohit Gupta

Megapixel single-photon avalanche diode (SPAD) arrays have been developed recently, opening up the possibility of deploying SPADs as general-purpose passive cameras for photography and computer vision. However, most previous work on SPADs has been limited ...

ASSOC COMPUTING MACHINERY2023

The role of secondary features in serial dependence

David Pascucci

Recent work indicates that visual features are processed in a serially dependent manner: The decision about a stimulus feature in the present is influenced by the features of stimuli seen in the past, leading to serial dependence. It remains unclear, howev ...

2023

A Sprayable Electrically Conductive Edible Coating for Piezoresistive Strain Sensing

Dario Floreano, Pietro Rossi, Bokeon Kwak

Edible electronics leverages the electronic properties of food-derived materials to deliver safer technologies that can be degraded (or digested) in the environment (or body) at the end-of-life. Sensors will be central to future smart edible robots, and ed ...

2024

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

WikiArtVectors: Style and Color Representations of Artworks for Cultural Analysis via Information Theoretic Measures

Bhargav Srinivasa Desikan

With the increase in massive digitized datasets of cultural artefacts, social and cultural scientists have an unprecedented opportunity for the discovery and expansion of cultural theory. The WikiArt dataset is one such example, with over 250,000 high qual ...

MDPI2022

The Height of Chitinous Ridges Alone Produces the Entire Structural Color Palette

Hemant Kumar Raut

The colorful wings of butterflies result from the interaction between light and the intricate chitinous nanostructures on butterflies’ scales. This study demonstrates that just by reproducing the chitinous ridges present in butterfly scales (i.e., without ...

2022

Functional Ink Formulation for Printing and Coating of Graphene and Other 2D Materials: Challenges and Solutions

Frank Nüesch, Jakob Heier, Sina Abdolhosseinzadeh, Mohammad Jafarpour

The properties of 2D materials are unparalleled when compared to their 3D counterparts; many of these properties are a consequence of their size reduction to only a couple of atomic layers. Metallic, semiconducting, and insulating types can be found and fo ...

WILEY2022

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Samuel Rosset, Herbert Shea, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

Effect of Indoor Temperature and Glazing with Saturated Color on Visual Perception of Daylight

Marilyne Andersen, Giorgia Chinazzo, Jan Wienold

This paper presents the combined effect of indoor temperature (19 degrees C, 22 degrees C, and 26 degrees C) and colored glazing (blue, orange, and neutral) on visual perception of daylight. Experiments were performed in an office-like test room, in which ...

TAYLOR & FRANCIS INC2021

Multi-User Precoder Designs for RGB Visible Light Communication Systems

Roser Vinals Terres

In this paper, we design linear precoders for the downlink of a visible light communication (VLC) system that simultaneously serves multiple users. Instead of using phosphor-coated white light-emitting diodes (PWLEDs), we focus on Red-Green-Blue light-emit ...

2020

Benchmarking JPEG XL image compression

Touradj Ebrahimi, Evgeniy Upenik

JPEG XL is a practical, royalty-free codec for scalable web distribution and efficient compression of high-quality photographs. It also includes previews, progressiveness, animation, transparency, high dynamic range, wide color gamut, and high bit depth. U ...

SPIE2020

All-Printed Electrocorticography Array for In Vivo Neural Recordings

Fabian Michael Lütolf, Diego Ghezzi, Eleonora Borda, Laura Ferlauto, Nenad Marjanovic

Bioelectronic and neuroprosthetic interfaces rely on implanted microelectrode arrays (MEAs) to interact with the human body. Printing techniques, such as inkjet and screen printing, are attractive methods for the manufacturing of MEAs because they allow fl ...

2020

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto, Massimo Rosa

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020

A smart low molecular weight gelator for the triple detection of copper (II), mercury (II), and cyanide ions in water resources

Rosario Scopelliti

Novel supramolecular gelators based on quinoline-indolin-2-one structure were synthesized. These gelators formed stable organogels in a mixture of DMSO/H2O (1:1). The scanning electron microscopy (SEM), IR and NMR spectroscopies, and rheological measuremen ...

ELSEVIER2020