Publication

A fixed-volume microfluidic mixer realized using multilayer PDMS technology

Martinus Gijs, Hüseyin Cumhur Tekin
2009
Conference Papers

Abstract

We present leakage-free valves and an efficient fixed-volume mixer fabricated using a four-layer soft lithography technique in polydimethylsiloxane (PDMS). Mixing is achieved with a 95% efficiency in a few seconds by creating circular flow patterns inside a simple rectangular chamber. Pressurized air is used to actuate control chambers for active valving and mixing. In our device, neither the mold nor the microfluidic channel requires complex designs.

Official source

https://infoscience.epfl.ch/entities/publication/95f01cfe-bf17-412a-97f9-1cbb9e1ceefe

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Martinus Gijs, Hüseyin Cumhur Tekin
2009
Conference Papers

Abstract

Official source

https://infoscience.epfl.ch/entities/publication/95f01cfe-bf17-412a-97f9-1cbb9e1ceefe

About this result

Related concepts (15)

Microfluidics

Microfluidics refers to a system that manipulates a small amount of fluids ((10−9 to 10−18 liters) using small channels with sizes ten to hundreds micrometres. It is a multidisciplinary field that involves molecular analysis, biodefence, molecular biology, and microelectronics. It has practical applications in the design of systems that process low volumes of fluids to achieve multiplexing, automation, and high-throughput screening.

Droplet-based microfluidics

Droplet-based microfluidics manipulate discrete volumes of fluids in immiscible phases with low Reynolds number and laminar flow regimes. Interest in droplet-based microfluidics systems has been growing substantially in past decades. Microdroplets offer the feasibility of handling miniature volumes (μl to fl) of fluids conveniently, provide better mixing, encapsulation, sorting, sensing and are suitable for high throughput experiments.

Paper-based microfluidics

Paper-based microfluidics are microfluidic devices that consist of a series of hydrophilic cellulose or nitrocellulose fibers that transport fluid from an inlet through the porous medium to a desired outlet or region of the device, by means of capillary action. This technology builds on the conventional lateral flow test which is capable of detecting many infectious agents and chemical contaminants. The main advantage of this is that it is largely a passively controlled device unlike more complex microfluidic devices.

Related publications (30)

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Khushdeep Sharma

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Single emulsion drops for photocatalytic water splitting as a membrane-free approach to product separation

Sophia Haussener, Esther Amstad, Swarnava Nandy, Sangram Ashok Savant, Gaia De Angelis

The coevolution of hydrogen and oxygen during photocatalytic water splitting presents a challenge for efficient product separation. Here, we demonstrate membrane-free, drop-based photocatalytic water splitting with inherent product separation and competiti ...

2023

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023