Publications related to Sizing of branch inductors parameters in modular multilevel converters: An analytical approach

Modeling and optimization of PCB coils for inductive power transfer systems

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Chiara Frittitta, Federica Demattè

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Ambrine Douhane, Marcus Cemes

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Gate unit for a gate-commutated thyristor and integrated gate-commutated thyristor

Drazen Dujic, Jakub Kucka

The invention relates to a gate unit (22) for controlling a gate commutated thyristor (21), comprising: - a voltage selector (26) for selectively applying a high supply potential (Vpos), a middle supply potential (Vmid), and a low supply potential (Vneg); ...

2023

Modeling and Design Optimization of Loosely Coupled PCB Spiral Coils in Inductive Power Transfer Systems

Drazen Dujic, Xiaotong Du

There are various possibilities to realize coil winding designs for an inductive power transfer system. In order to achieve high power transfer efficiency and power density and explore trade-offs between the two, design optimization around the coil link is ...

2023

High-Kinetic Inductance Superconducting Technology for Quantum Applications

Simone Frasca

Superconducting materials present unique properties, which make a potential technological platform based on superconductors extremely appealing for a wide set of applications, both classical and not. Among these classes of materials, high-kinetic inductanc ...

EPFL2023

An Implantable Inductive Sensor for Direct and Continuous Monitoring of the Pulmonary Artery Cross-Sectional Area

Marco Mattavelli, Catherine Dehollain, Diego Ruben Barrettino, Kerim Türe, Mustafa Besirli

This paper presents a novel method for the measure of the cross-sectional area (CSA) of an artery to be used for the direct and continuous (24/7) monitoring of cardiac output (CO). The method is based on the inductance change of an anchoring loop mounted o ...

IEEE2022

Ultra-High-Voltage (7-kV) Bidirectional Flyback Converter Used to Drive Capacitive Actuators

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet, Morgan Almanza, Lucas Pniak

Dielectric elastomer actuators (DEAs) have extremely advantageous characteristics such as lightness, compactness, flexibility, and large displacements. However, in order to operate, they can require voltages in the order of several thousands of volts. Thus ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Schmitt trigger-based control strategy for the discharge phase of an ultra-high-voltage bidirectional flyback

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet

The control strategy to discharge a capacitive load such as a dielectric elastomer actuator charged to several kilo-volts is critical to obtain a safe and reliable actuation. In the case of this publication, an ultra-high voltage bidirectional flyback conv ...

IEEE2021

Thermally-Compensated Magnetic Core Loss Model for Time-Domain Simulations of Electrical Circuits

Drazen Dujic, Min Luo, Nikolina Djekanovic

This paper introduces a thermally-compensated magnetic hysteresis model, capable of accurately determining core losses of ferrite materials while accounting for core temperature variations. The employed model is based on permeance-capacitance analogy and i ...

2021

Enhanced-DAB Converter: Comprehensive Design Evaluation

Elison de Nazareth Matioli, Armin Jafari, Mohammad Samizadeh Nikooytabalvandani, Furkan Karakaya

Soft switching in dual-active-bridge (DAB) converters enables their efficient operation at high frequencies, where the reduction in the size of magnetic components could result in ultra-high power densities. Nonetheless, losing soft-switching at high frequ ...

IEEE2021

Medium Voltage Impedance and Admittance Measurement and System Identification Techniques

Marko Petkovic

The recent trend of an increasing share of renewable energy sources in modern power systems, as well as the integration of power electronics equipment, is shaping the requirements for stable grid infrastructure. These requirements mainly come from the stab ...

EPFL2021

Progress on the Design of the 15 T Magnet of the EDIPO Test Facility

Pierluigi Bruzzone, Kamil Sedlák, Roberto Guarino, Evgeny Solodko

EDIPO 2 (the upgraded EDIPO test facility) will provide a unique testbed for superconducting cables for fusion magnets,accelerators, and other applications. Compared to the previous magnet assembly, the magnetic field is enhanced from 12.35 T to 15 T, the ...

IEEE Institute of Electrical and Electronics Engineers2021

Energy Analysis of a Cardiac Assist Device based on Dielectric Elastomer Actuator through an Equivalent Electrical Circuit

Yves Perriard, Yoan René Cyrille Civet, Jonathan André Jean-Marie Chavanne, Francesco Clavica

Lumped parameter model and mock circulation loop are two tools commonly used in biomedical research to simulate cardiac system in order to study different assist devices. In this paper, a lumped parameter model is proposed to simulate a circulation loop. T ...

IEEE2021

97.4%-Efficient All-GaN Dual-Active-Bridge Converter with High Step-up High-Frequency Matrix Transformer

Elison de Nazareth Matioli, Armin Jafari, Palliyage Srilak Nirmana Perera, Mohammad Samizadeh Nikooytabalvandani

In this work, we demonstrate a state-of-the-art high step-up/down dual-active-bridge (DAB) converter designed with GaN transistors, to achieve a high efficiency and large power-density. A quasi-planar matrix transformer with high step-up/down ratio is demo ...

2020

Analysis of the Effectiveness of the Series Inductor Integration Into the MFT for SST Applications

Marko Mogorovic, Drazen Dujic

This paper analyzes the effectiveness of the integration of the series inductor into the medium frequency transformer used for series resonant or dual active bridge converters - galvanically isolated DC-DC converters for high-power medium-voltage (solid st ...

2020

The Upper Bound of the Speed of Propagation of Waves along a Transmission Line

Farhad Rachidi-Haeri, Marcos Rubinstein

According to theory, once certain conditions are fulfilled, current and voltage pulses propagate along ideal transmission lines with the speed of light. One can reach such a conclusion only when the conductors are assumed to be perfectly conducting, which ...

2020

Mixed Simulation-Experimental Optimization of a Modular Multilevel Switched Capacitors Converter Cell

Elison de Nazareth Matioli, Palliyage Srilak Nirmana Perera, Georgios Kampitsis, Remco Franciscus Peter van Erp

This work presents a mixed simulation experimental method for efficiency optimization of a modular multilevel switched capacitor DC-DC converter. The results show that the optimal frequency deviates from the circuit's self-resonant frequency, commonly prop ...

IEEE2020

Protection Coordination in Marine DC Power Distribution Networks

Seongil Kim

The increasing penetration of renewable energy sources, energy storage systems (ESSs), and DC loads has opened the door to DC technology to pave its way into future grids. The shift has been more obvious in the marine domain supported by track records of i ...

EPFL2020

Critical Parasitic Elements of Coupled Inductors for Ultra-High Voltage Flyback Converters Used to Drive Capacitive Actuators

Yves Perriard, Alexis Boegli, Raphaël Johannes Charles Mottet, Morgan Almanza

This paper presents the critical parasitic elements of coupled inductors and their influence when designing a low input (12V) and ultra-high output voltage (>4000V) DC-DC Flyback Converter. The aim is to design a compact converter capable to supply the ult ...

IEEE2019