Publications related to Film thickness distribution in gravity-driven pancake-shaped droplets rising in a Hele-Shaw cell

Stability of a liquid layer draining around a horizontal cylinder: Interplay of capillary and gravity forces

François Gallaire, Shahab Eghbali, Simeon Vladimirov Djambov

We study the drainage of a viscous liquid film coating the outside of a solid horizontal cylinder, where gravity acts vertically. We focus on the limit of large Ohnesorge numbers Oh, where inertia is negligible compared to viscous effects. We first study t ...

Amer Physical Soc2024

Influence of Viscous Lubricant on Nucleation and Propagation of Frictional Ruptures

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Federica Paglialunga

Fluids are pervasive in the Earth's crust and saturate fractures and faults. The combination of fluids and gouge layers developing along faults can generate fluids of different viscosities. Such viscous fluids were found to influence the reactivation, fric ...

2023

Columnlike free-interface flows: symmetry breaking and linear instability

Shahab Eghbali

This thesis is dedicated to the analysis of a subclass of interfacial flows, columnlike free-interface flows, from two view angles: (i) the symmetry breaking under geometry-induced or external forces, (ii) their stability against infinitesimal disturbances ...

EPFL2023

Wetting Dynamics Beneath an Impacting Droplet

Ramin Kaviani

Many natural and industrial processes involve fluid flow at a three phase interface between liquid, solid and gas. When the liquid is forced to move rapidly over the solid surface, the physical mechanisms governing contact line motions are multi-phase and ...

EPFL2023

Modeling the origins of adhesive wear across scales

Son-Jonathan Pham-Ba

Friction and wear occur at every interface between solid materials. In the design of mechanical devices, it is desirable to be able to quantify and control the amount of friction and wear, as well as predict their evolution with time. ``Tribology'' is the ...

EPFL2022

A Simple Mechanistic Model for Friction of Rough Partially Lubricated Surfaces

Jean-François Molinari, Julie Richard, Tobias Brink, Gianluca Costagliola

We report experimental measurements of friction between an aluminum alloy sliding over steel with various lubricant densities. Using the topography scans of the surfaces as input, we calculate the real contact area using the boundary element method and the ...

2021

The Role of Geometrical Parameters in the Lubrication of the Swiss Lever Escapement

Stefano Mischler, Sandra Guadalupe Maldonado, Alejandro Roda Buch

The lubrication regimes of a contact pair escapement-ruby pallet of a Swiss lever escapement have been investigated combining the theory of fluid lubrication with a well-established kinematic and inverse dynamic multibody model. The kinematic analytical re ...

2021

Force Scaling Comparison of Transport Phenomena in Proton Exchange Membrane Fuel Cell Flow Channels

Mahbod Heidari

Liquid-gas two-phase flow in flow channels of proton exchange membrane (PEM) fuel cells has been investigated extensively in the literature; however, a comparison between the order of the magnitude of the forces occurring within the flow channels has not b ...

ASME2021

Unstable tilting motion of flexibly supported gas bearing bushings

Jürg Alexander Schiffmann, Philipp Kaspar Bättig

This paper presents measurements of the motion amplitudes from flexibly supported Herringbone Grooved Journal Bearing bushings. Measurements taken in four locations on the flexibly supported bearing bushing enable the distinction between the radial and the ...

2022

Tribocorrosion of a CoCrMo alloy in sulfuric acid - Glycerol mixtures

Stefano Mischler, Shoufan Cao

This work reports on the tribocorrosion properties of a CoCrMo alloy sliding under imposed passive potential against alumina in sulfuric acid-glycerol mixtures exhibiting different viscosities and thus, in principle, lubrication properties. As expected, we ...

ELSEVIER SCIENCE SA2020

Tribological Approach to the Watch Movements

Valentine Agnès Madeleine Magnin

Mechanical watches are complex and sensitive systems that have to maintain a faultless precision over their lifetime. However, this precision can be altered by disturbances occurring during the functioning time, such as friction, lubricant drying, or wear, ...

EPFL2020

Tribological properties of gold matrix composite coatings with carbon nanocapsules containing ionic liquid lubricants

Stefano Mischler, Anna Neus Igual Muñoz

Self-lubricating, gold matrix composite coatings were produced by electrochemical codeposition of carbon nanocapsules filled with ionic liquid (IL) from a colloidal galvanic bath on a nickel electrode. The tribological response of the composite coatings wa ...

ELSEVIER2020

Theoretical and Experimental Investigation of a Small-scale, High-speed, and Oil-free Radial Anode Off-gas Recirculation Fan for Solid Oxide Fuel Cell Systems

Jürg Alexander Schiffmann, Jan Van Herle, Patrick Hubert Wagner

The Laboratory for Applied Mechanical Design (LAMD) designed, manufactured, and experimentally tested a novel recirculation fan for a 10 kWe solid oxide fuel cell (SOFC). The fan uses oil-free bearings, more specifically herringbone-grooved journal and spi ...

2020

Thin Gas Film Isothermal Condensation in Aerodynamic Bearings

Jürg Alexander Schiffmann, Eliott Philippe Guenat

High-speed small-scale turbomachinery for waste heat recovery and vapor compression cycles is typically supported on gas-lubricated bearings operating close to the saturation conditions of the lubricant. Under particular conditions, the gas film might loca ...

2019

Flexible support and enhanced groove geometries for gas lubricated bearings

Philipp Kaspar Bättig

Gas lubricated Herringbone-Grooved Journal Bearings (HGJB) are a promising solution to support high-speed rotors in oil-free turbo-machinery due to their compactness, relatively low losses, no need for lubrication and low wear. Gas lubricated bearings, how ...

EPFL2019

A Numerical Model For The Simulation Of Shallow Laser Surface Melting

Alexandre Caboussat, Alexandre Masserey, Marco Picasso, Julien Hess

We present a multi-physics model for the approximation of the coupled system formed by the temperature-dependent Navier-Stokes equations with free surfaces. The main application is the industrial process of shallow laser surface melting (SLSM), for laser p ...

INT CENTER NUMERICAL METHODS ENGINEERING2019

Viscous growth and rebound of a bubble near a rigid surface

François Gallaire, Giacomo Gallino

Motivated by the dynamics of microbubbles near catalytic surfaces in bubble-powered microrockets, we consider theoretically the growth of a free spherical bubble near a flat no-slip surface in a Stokes flow. The flow at the bubble surface is characterised ...

Cambridge University Press2018

Pattern formation in thin liquid films: from coating-flow instabilities to microfluidic droplets

Gioele Mariano Nicolò Balestra

Nature and technical applications abound with thin viscous flows, ranging from the lava flow on volcanoes to the lubricating layer around confined bubbles in the microchannels of Lab-on-a-Chip devices. Countless are the examples where coating flows arise i ...

EPFL2018

3D Boundary Element Simulation of Droplet Dynamics in Microchannels: How Droplets Squeeze Through Constrictions and Move in Electric Fields

Simon Sebastian Schütz

Flows of fluids with free surfaces show complex dynamical behavior. Examples include effects like capillary surface waves, topological transitions such as droplet breakup and coalescence, or pattern formation in wetting and de-wetting dynamics. These compl ...

EPFL2018

Miniaturized tube fixed plug drawing: determination of the friction coefficients and drawing limit of 316 LVM stainless steel

Stéphane Dobler, Jean-Marie Drezet, Stefano Mischler, Bastien De Marco, Nicolas Paul Henry Chobaut, Vance Nguyen

Tube drawing with a ﬁxed plug is investigated experimentally and numerically in order to optimise an industrial pass sequence. Tube drawings are performed on a laboratory drawing bench equipped with force, displacement and temperature sensors. The drawing ...

2018