Publications related to Surface 3D Micro Free Forms: Multifunctional Microstructured Mesoporous alpha-Alumina by in Situ Slip Casting Using Excimer Laser Ablated Polycarbonate Molds

Stable cones in the thin one-phase problem

The aim of this work is to study homogeneous stable solutions to the thin (or fractional) one -phase free boundary problem. The problem of classifying stable (or minimal) homogeneous solutions in dimensions n >= 3 is completely open. In this context, axial ...

Johns Hopkins Univ Press2024

Multimaterial Volumetric Printing of Silica-Based Glasses

Christophe Moser, Damien Claude-Marie Loterie, Paul Delrot, Jorge Andres Madrid Wolff, Antoine Vincent Boniface, Roberto Arturo Emma

Silicate glasses have played a major role as structural and functional materials in human civilization since ancient Egypt. Despite their widespread use and importance in modern society, silica glasses with complex geometries are only fabricated in automat ...

Wiley2024

Into the ice: Exploration and data capturing in glacial moulins by a tethered robot

Josephine Anna Eleanor Hughes, Max Mirko Polzin

Glacial moulins (cylindrical meltwater drainage shafts) provide valuable insights into glacier dynamics, but are inaccessible and hazardous environments for humans to study. Exploring them using passive sensor probes has revealed their complex geometry, wh ...

Wiley2024

3D diffractive optics for linear interconnects and nonlinear processing

Niyazi Ulas Dinç

The optical domain presents potential avenues for enhancing both computing and communication due to its inherent properties of bandwidth, parallelism, and energy efficiency. This research focuses on harnessing 3-Dimensional (3D) diffractive optics for nove ...

EPFL2024

Benchmarking machine-readable vectors of chemical reactions on computed activation barriers

Anne-Clémence Corminboeuf, Yannick Calvino Alonso, Puck Elisabeth van Gerwen, Ksenia Briling, Malte Martin Franke

In recent years, there has been a surge of interest in predicting computed activation barriers, to enable the acceleration of the automated exploration of reaction networks. Consequently, various predictive approaches have emerged, ranging from graph-based ...

Royal Soc Chemistry2024

Reactive collision-free motion generation in joint space via dynamical systems and sampling-based MPC

Aude Billard, Nadia Barbara Figueroa Fernandez, Mikhail Koptev

Dynamical system (DS) based motion planning offers collision-free motion, with closed-loop reactivity thanks to their analytical expression. It ensures that obstacles are not penetrated by reshaping a nominal DS through matrix modulation, which is construc ...

Sage Publications Ltd2024

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

One-Dimensional "Ghost Imaging" in Electron Microscopy of Inelastically Scattered Electrons

Fabrizio Carbone, Ivan Madan, Giovanni Maria Vanacore, Ido Kaminer, Ebrahim Karimi, Simone Gargiulo

Entanglement and correlation are at the basis of quantummechanicsand have been used in optics to create a framework for "ghostimaging". We propose that a similar scheme can be used in anelectron microscope to exploit the correlation of electrons with theco ...

2023

Well-posedness Issues For the Half-Wave Maps Equation With Hyperbolic And Spherical Targets

Yang Liu

This thesis is a study of the global well-posedness of the Cauchy problems for half-wave maps from the Minkowski space of dimension n+1 to the 2-dimensional sphere and the hyperbolic plane. The work is mainly based on the results from Krieger-Sire 17' in ...

EPFL2023

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

Nonlinear dynamics and Kerr frequency comb formation in lattices of coupled microresonators

Tobias Kippenberg, Kenichi Komagata, Alexey Tikan, Aleksandr Tusnin

Recently, substantial progress has been made in the understanding of microresonators frequency combs based on dissipative Kerr solitons (DKSs). However, most of the studies have focused on the single-resonator level. Coupled resonator systems can open new ...

Nature Portfolio2023

Infrared-active phonons in one-dimensional materials and their spectroscopic signatures

Nicola Marzari, Thibault Daniel Pierre Sohier, Norma Rivano

Dimensionality provides a clear fingerprint on the dispersion of infrared-active, polar-optical phonons. For these phonons, the local dipoles parametrized by the Born effective charges drive the LO-TO splitting of bulk materials; this splitting actually br ...

Nature Portfolio2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Light-Induced Halide Segregation in 2D and Quasi-2D Mixed-Halide Perovskites

Manuel Cordova, David Lyndon Emsley, Aditya Mishra, Michael Allan Hope

Photoinduced halide segregation hinders widespread application of three-dimensional (3D) mixed-halide perovskites. Much less is known about this phenomenon in lower-dimensional systems. Here, we study photoinduced halide segregation in lower-dimensional mi ...

AMER CHEMICAL SOC2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Emergent non-Hermitian localization phenomena in the synthetic space of zero-dimensional bosonic systems

Fabrizio Minganti

Phase transitions in non-Hermitian systems are at the focus of cutting edge theoretical and experimental research. On the one hand, parity-time- (PT-) and anti-PT-symmetric physics have gained ever-growing interest, due to the existence of non-Hermitian sp ...

AMER PHYSICAL SOC2023

Long-range electrostatic contribution to electron-phonon couplings and mobilities of two-dimensional and bulk materials

Massimiliano Stengel, Nicola Marzari, Marco Gibertini, Samuel Poncé

Charge transport plays a crucial role in manifold potential applications of two-dimensional materials, in-cluding field-effect transistors, solar cells, and transparent conductors. At most operating temperatures, charge transport is hindered by scattering ...

AMER PHYSICAL SOC2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

A multi scale consolidation model for press moulding of hybrid textiles into complex geometries

Vincent Werlen

Side-by-side hybrid textiles are an intermediate step for the production of fibre-reinforced thermoplastic composites. Press moulding these materials combining reinforcing fibre textiles and thermoplastic matrix textiles or flexible layers is a promising m ...

EPFL2023

A method and system for enforcing smoothness constraints on surface meshes from a graph convolutional neural network

Pascal Fua, Pamuditha Udaranga Wickramasinghe

A method for enforcing smoothness constraints on surface meshes produced by a Graph Convolutional Neural Network (GCNN) including the steps of reading image data from a memory, the image data including two-dimensional image data representing a three-dimens ...

2023