Publications related to An alternative ECRH front steering launcher for the ITER upper port

Progress in the development of the ITER baseline scenario in TCV

Olivier Sauter, Stefano Coda, Alexander Karpushov, Yann Camenen, Benoît Labit, Antoine Pierre Emmanuel Alexis Merle, Olivier Claude Martin Février, Simon Van Mulders, Filippo Bagnato, Alessandro Pau, Matteo Vallar, Cassandre Ekta Contré, Stefano Marchioni, Oleg Krutkin, Reinart Andreas J. Coosemans

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...

2024

Inter-discharge optimization for fast, reliable access to ASDEX Upgrade advanced tokamak scenario

Olivier Sauter, Hartmut Zohm, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré

Rapid inter-discharge simulation and optimization using the RAPTOR code have allowed the development of a reliable and reproducible early heating strategy for an advanced tokamak (AT) scenario on ASDEX Upgrade. Solving for electron heat and current diffusi ...

IOP Publishing Ltd2024

Modelling of energetic particle drive and damping effects on TAEs in AUG experiment with ECCD

Alexander Karpushov, Giovanni Tardini

The impact of electron cyclotron current drive (ECCD)-driven current on toroidicity-induced Alfven eigenmodes (TAEs) in experiments on the AUG tokamak is investigated numerically. The dynamical evolution of the plasma profiles and equilibria are modelled w ...

IOP Publishing Ltd2024

Gyrokinetic turbulence modeling of a high performance scenario in JT-60SA

Stephan Brunner, Stefano Coda, Aylwin Iantchenko

Local gyrokinetic simulations are used to model turbulent transport for the first time in a representative high-performance plasma discharge projected for the new JT-60SA tokamak. The discharge features a double-null separatrix, 41 MW of combined neutral b ...

IOP Publishing Ltd2024

Long plasma duration operation analyses with an international multi-machine (tokamaks and stellarators) database

Stefano Coda, Jeffrey Huang

Combined high-fusion performance and long-pulse operation is one of the key integration challenges for fusion energy development in magnetic devices. Addressing these challenges requires an integrated vision of physics and engineering aspects with the purp ...

IOP Publishing Ltd2024

Re-design of EU DEMO with a low aspect ratio

Hartmut Zohm

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

2024

Additively manufactured stretchable zipping electrostatic actuators

Giulio Grasso

The use of soft and stretchable materials allows the development of adaptive robotic systems and human-machine interfaces that are more natural and comfortable to interact with. One of the application fields that benefits the most from these compliant mate ...

EPFL2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Towards practical reinforcement learning for tokamak magnetic control

Jonas Buchli, Federico Alberto Alfredo Felici, Cristian Galperti, Brendan Tracey

Reinforcement learning (RL) has shown promising results for real-time control systems, including the domain of plasma magnetic control. However, there are still significant drawbacks compared to traditional feedback control approaches for magnetic confinem ...

Elsevier Science Sa2024

Impact of microwave beam scattering by density fluctuations on the electron-cyclotron power deposition profile in tokamaks

Stefano Coda, Joan Decker, Jean Arthur Cazabonne, Umesh Kumar, Oleg Krutkin

Electron-cyclotron waves are a tool commonly used in tokamaks, in particular to drive current. Their ability to drive current in a very localized manner renders them an optimal tool for MHD mode mitigation. However, such applications require high accuracy ...

IOP Publishing Ltd2024

Sensitivity Analysis of the Lumped Thermal Model of the EU 170 GHz Gyrotron Magnetron Injection Gun

Jean-Philippe Hogge, Francisco Sanchez

The ITER Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) system relies on 1 MW 170 GHz Gyrotrons to provide the mm-wave power needed for plasma heating, current drive, and magneto-hydrodynamic control. The design and modeling of the contro ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Mengdi Kong

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

IOP Publishing Ltd2024

Full-discharge simulation and optimization with the RAPTOR code, from present tokamaks to ITER and DEMO

Simon Van Mulders

Tokamak devices aim to magnetically confine a hydrogen plasma at sufficiently high pressure to achieve net energy production from nuclear fusion of light isotopes. Predictive modeling and optimization is crucial for reliable operation of tokamak reactors, ...

EPFL2023

Present design of the Steering Mirror Assembly (SMA) for ITER ECHUL

René Chavan, Timothy Goodman, Anastasia Xydou

In the ITER Tokamak, four Electron Cyclotron Heating Upper Launchers (ECHUL) are needed to control plasma instabilities at the rational surfaces, most importantly the q = 3/2 and q = 2/1 neoclassical tearing modes (NTMs). Each ECHUL is equipped with a set ...

2023

An experimental and computational study of tokamak plasma turbulence

Aylwin Iantchenko

Turbulence driven by small-scale instabilities results in strong heat and particle transport, which significantly shortens the confinement time and prevents the formation of a self-sustained plasma reaction in magnetic confinement devices. Control and poss ...

EPFL2023

High power mm-wave loss measurements of ITER ex-vessel waveguide components at the FALCON test facility at the Swiss Plasma Center

René Chavan, Timothy Goodman, Avelino Mas Sanchez, Anastasia Xydou, Humberto Torreblanca Quiroz

Many future fusion devices will rely heavily, if not solely, on electron cyclotron (EC) heating subsystems to provide bulk heating, instability control (neoclassical tearing mode (NTM) stabilization), and thermal instability control. Efficient use of the i ...

E D P SCIENCES2023

JET D-T scenario with optimized non-thermal fusion

Mikhail Maslov, Javier García Hernández, Haomin Sun, Michele Marin

In JET deuterium-tritium (D-T) plasmas, the fusion power is produced through thermonuclear reactions and reactions between thermal ions and fast particles generated by neutral beam injection (NBI) heating or accelerated by electromagnetic wave heating in t ...

IOP Publishing Ltd2023

Investigation of the interplay between Electron-Cyclotron waves, suprathermal electrons and turbulence in tokamak plasmas

Jean Arthur Cazabonne

Electron-Cyclotron waves are routinely used in tokamaks to heat the plasma and to drive current through the electron channel. Their unique ability to drive very localized current renders them the main foreseen tool for neoclassical tearing mode mitigation ...

EPFL2023

Optimization of X-mode electron cyclotron current drive in high-electron-temperature plasma in the EAST tokamak

Fang Liu, Chunmin Zhang, Joan Decker

A discharge with electron temperature up to 14 keV has been achieved in EAST. Analysis of the electron cyclotron current drive (ECCD) efficiency at high electron temperature under EAST parameters is presented using C3PO/LUKE code. Simulation results show t ...

2023