Publications related to Small-scale metal castings, small-scale metal/transparent composite structures and process to produce same

Laser-based manufacturing of freeform glass micro-optics through topological transformation

Glass has been the material of choice for making optical elements, in large part due to its intrinsic properties: a temperature-dependent viscosity, which enables shaping the material into a broad variety of functional and artistic glassware. Silica glass ...

EPFL2024

Parametric Wavelength Conversion in Waveguiding Structures: Efficiency, Bandwidth and Polarization

Arman Ayan

Photonics integrated circuits are a promising solution for the growing demands of data transmission and future system-on-chip technologies. Within this context, nonlinear optical interactions offer unique opportunities for all-optical processing, sampling, ...

EPFL2024

A Cavity-Microscope for Quantum Simulations with Locally-Controllable All-to-All Interactions

Nick Jacob Sauerwein

This thesis presents the development, construction, and benchmark of an experimental platform that combines cold fermionic 6Li atoms with locally controllable light-matter interactions. To enable local control, a new device, the cavity-microscope, was crea ...

EPFL2024

Domain Imaging and Switching Dynamics in BaTiO3-Based Photonic Integrated Devices

Jacqueline Geler Kremer

Keeping up with our constantly connected lifestyle of instant messages and video streaming has its repercussions. Data centers have been gobbling up resources becoming a significant share of the energy used worldwide. To keep up with demand and curb the en ...

EPFL2023

Layered metals as polarized transparent conductors

Philip Johannes Walter Moll, Matthias Carsten Putzke, Chunyu Guo, Maja Deborah Bachmann

The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conducti ...

Nature Portfolio2023

Photonic assembly tunable via the pockels effect and method for use in frequency-modulated lidar

Tobias Kippenberg, Grigorii Likhachev, Viacheslav Snigirev

A photonic assembly, a laser setup comprising said photonic assembly and a method for performing frequency-modulated continuous-wave light detection and ranging using said laser setup are disclosed. The photonic assembly (1) comprises an active photonic ch ...

2023

Nonlinear Integrated Photonics for Ranging Applications

Anton Lukashchuk

This thesis explores the application of recent advances in integrated photonics to the field of light detection and ranging (LiDAR). The progress in photonic integration allows for unprecedented levels of light manipulation on micrometer scales through the ...

EPFL2023

Bringing casting to microfabrication: processing and deformation of microcastings

Luciano Borasi

This work extends the range of pathways for the production of metallic microcomponents by downscaling metal casting. This is accomplished by using either of two different molding techniques, namely femtosecond laser micromachining or lithographic silicon m ...

EPFL2023

Cavitation induced by pulsed and continuous-wave fiber lasers in confinement

Christophe Moser, Jan Krizek

Bubbles generated with lasers in liquids under confinement have been investigated for their potential use as the driving mechanism for liquid micro-jets in various microfluidic devices, such as needle-free jet injectors. Here, we report on the study of bub ...

ELSEVIER SCIENCE INC2023

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Tobias Kippenberg, Junqiu Liu

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE Institute of Electrical and Electronics Engineers2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips

Tobias Kippenberg, Anat Siddharth

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for ...

Optica Publishing Group2023

On the interaction of femtosecond laser pulses with layered dielectric materials

Ruben Ricca

Materials properties are strictly dependent on their microstructure. The internal symmetries and the disposition of the constituting atoms of a material, which depend on its crystallographic structure, greatly affect its response to mechanical, electromagn ...

EPFL2023

Femtosecond laser-induced modifications and self-organization in complex glass systems

Gözden Torun

Ultrashort laser pulses, i.e., pulses emitted shorter than a picosecond, can tailor material properties by introducing permanent modifications locally in three dimensions. Remarkably, under a certain exposure condition, these modifications are accompanied ...

EPFL2023

Ultrafast tunable lasers using lithium niobate integrated photonics

Rui Ning Wang, Tobias Kippenberg, Junqiu Liu, Guanhao Huang, Mikhail Churaev, Anat Siddharth, Viacheslav Snigirev

Early works(1) and recent advances in thin-film lithium niobate (LiNbO3) on insulator have enabled low-loss photonic integrated circuits(2,3), modulators with improved half-wave voltage(4,5), electro-optic frequency combs(6) and on-chip electro-optic devic ...

NATURE PORTFOLIO2023

In situ monitoring of femtosecond laser-induced modifications in dielectrics

Olivier Bernard

Over the last decades, the progress made in the generation of laser pulses shorter than a picosecond (10^-12 s) has allowed us to reach extreme optical power intensities exceeding 10^15 W cm^-2. This tremendous power has triggered an abundance of original ...

EPFL2023

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Olivier Bernard, Assim Boukhayma, Andrea Kraxner

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Chaotic microcomb-based parallel ranging

Tobias Kippenberg, Junqiu Liu, Anton Lukashchuk, Aleksandr Tusnin

The intrinsic random amplitude and phase modulation of 40 distinct lines of a microresonator frequency comb operated in the modulation instability regime are used to realize massively parallel random-modulation continuous-wave light detection and ranging, ...

Nature Publishing Group2023

Voltage-tunable optical parametric oscillator with an alternating dispersion dimer integrated on a chip

Tobias Kippenberg, Anton Stroganov, Alexey Tikan, Aleksandr Tusnin

Optical parametric oscillators enable the conversion of pump light to new frequency bands using nonlinear optical processes. Recent advances in integrated nonlinear photonics have led to the creation of compact, chip-scale sources via Kerr-nonlinearity-ind ...

Optica Publishing Group2023

Method for operating a frequency agile tunable self-injection locking laser system and self-injection locking laser system

Tobias Kippenberg, Grigorii Likhachev, Anat Siddharth

The invention relates to a Method for operating a frequency agile tunable self-injection locking laser system being formed by a laser device coupled to at least one optical resonator, wherein a diode current of a laser diode of the laser device is controll ...

2023