Publication

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Related publications (29)

Quench Detection and Temperature Measurement With Fiber Optic Sensors

Davide Uglietti, Kamil Sedlák, Christoph Müller

For the EU DEMO conductor testing, a temperature sensor based on Fiber Bragg Grating (FBG) optical fiber is studied at the EPFL Swiss Plasma Center. The SULTAN test facility has been upgraded to use fiber optic sensor for temperature monitoring and quench ...

IEEE Institute of Electrical and Electronics Engineers2024

Biobased Composites from Eugenol- and Coumarin-Derived Methacrylic Latex and Hemp Nanocellulose: Cross-Linking via [2+2] Photocycloaddition and Barrier Properties

Yves Leterrier, Sara Dalle Vacche

A novel-biobased latex was synthesized by redox-initiated emulsion copolymerization of ethoxy dihydroeugenyl methacrylate with 5 wt % of a photosensitive methacrylate containing a coumarin group. A stable copolymer latex having 16 wt % solids content and a ...

Amer Chemical Soc2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Micro modeling of irregular stone masonry walls using mathematical programming

Katrin Beyer, Qianqing Wang, Ketson Roberto Maximiano Dos Santos

While understanding the shear strength of stone masonry structures is important for the design and the mainte- nance, we still lack computational tools for predicting the strength as a function of the stone layout. Here we implement an end-to-end image bas ...

Springer2024

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Yves Perriard, Stefania Maria Aliki Konstantinidi, Markus Koenigsdorff

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Toward Wearable Biosensing by Spectroscopy-free Raman Shift Detection and Soft Optofluidics

Ata Jedari Golparvar

This thesis introduces spectroscopy-free Raman biosensing, which may find increasing use in the next generation of wearable devices for preventive healthcare. While wearables have made substantial advancements in detecting physical biomarkers, they have ye ...

EPFL2024

Near-Room-Temperature Detection of Aromatic Compounds with Inkjet-Printed Plasticized Polymer Composites

Thomas Maeder, Jürgen Brugger, Mohammadmahdi Kiaee

Chemiresistive gas sensors composed of a thermoplastic polymer matrix and conductive fillers offer various advantages for detecting volatile organic compounds (VOCs), including low power consumption due to near-room-temperature operation, high sensitivity, ...

Amer Chemical Soc2024

Enabling simultaneous reprocessability and fire protection via incorporation of phosphine oxide monomer in epoxy vitrimer

Véronique Michaud, Valentin Rougier

The conception of epoxy thermosets with both reprocessability and flame retardancy delineates a new horizon in polymer science, offering a material solution that is not only superior in fire safety but is also environment friendly. Herein, a flame-retardan ...

Journal Mater Sci Technol2024

M2SKD: Multi-to-Single Knowledge Distillation of Real-Time Epileptic Seizure Detection for Low-Power Wearable Systems

David Atienza Alonso, Amir Aminifar, Saleh Baghersalimi, Farnaz Forooghifar, Tomas Teijeiro Campo, Alireza Amirshahi

Integrating low-power wearable systems into routine health monitoring is an ongoing challenge. Recent advances in the computation capabilities of wearables make it possible to target complex scenarios by exploiting multiple biosignals and using high-perfor ...

2024

Polydimethylsiloxane based soft polymer optical fibers: From the processing-property relationship to pressure sensing applications

Fabien Sorin, Khushdeep Sharma, René M. Rossi

Polydimethylsiloxane (PDMS) based soft polymer optical fibers (POFs) have recently demonstrated their intriguing potential for different sensing applications like strain or temperature sensing. Recent studies have elaborated on the sensing capability of PD ...

2023

Thermally Drawn Elastomer Nanocomposites for Soft Mechanical Sensors

Inès Richard, Fabien Sorin, Yunpeng Qu, Stella Andréa Françoise Laperrousaz, Chaoqun Dong, Andreas Leber

Stretchable and conductive nanocomposites are emerging as important constituents of soft mechanical sensors for health monitoring, human-machine interactions, and soft robotics. However, tuning the materials' properties and sensor structures to the targete ...

WILEY2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mário Alexandre De Jesus Garrido, Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Process development of pre-impregnated hybrid thin-ply composites

Alexios Argyropoulos

Thin-ply composites, obtained with recently developed fiber spreading techniques, rapidly gained industrial interest because they offer a large composite design freedom, and lead to a composite tensile strength that is close to that of the individual fiber ...

EPFL2023

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Nanoscale local modification of PMMA refractive index by tip-enhanced femtosecond pulsed laser irradiation

Mihai Adrian Ionescu

Tip-enhanced optical effects have enabled a wide palette of nanoscale investigation techniques and recently they were successfully used to modify and manipulate matter with nanoscale spatial resolution. We contribute to this latter area by reporting a viab ...

ELSEVIER2023

Dendrimer-Based Coatings on a Photonic Crystal Surface for Ultra-Sensitive Small Molecule Detection

Serguei Sekatski

We propose and demonstrate dendrimer-based coatings for a sensitive biochip surface that enhance the high-performance sorption of small molecules (i.e., biomolecules with low molecular weights) and the sensitivity of a label-free, real-time photonic crysta ...

MDPI2023

Domain Imaging and Switching Dynamics in BaTiO3-Based Photonic Integrated Devices

Jacqueline Geler Kremer

Keeping up with our constantly connected lifestyle of instant messages and video streaming has its repercussions. Data centers have been gobbling up resources becoming a significant share of the energy used worldwide. To keep up with demand and curb the en ...

EPFL2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

How to Make Elastomers Piezoelectric?

Frank Nüesch, Francis Owusu

Piezoelectrics play a significant role in modern electronics and electric devices. Thermal or mechanical stress on such materials induces a change in polarization generating an electric response, which is the sole effect of why they are so interesting. How ...

Wiley2023

Photonic radar for contactless vital sign detection

Yang Liu

Vital sign detection is used across ubiquitous scenarios in medical and health settings, and contact and wearable sensors have been widely deployed. However, they are unsuitable for patients with burn wounds or infants with insufficient areas for attachmen ...

Nature Publishing Group2023