Publications related to Photoluminescence from a single InGaAs epitaxial quantum rod

Study of growth-induced point defects and their impact on InGaN-based optoelectronic devices

GaN exhibits a decomposition tendency for temperatures far below its melting point and common growth temperatures used in metal-organic vapour phase epitaxy (MOVPE).This characteristic is known to be a major obstacle for realising GaN bulk substrate. There ...

EPFL2024

Growth and Doping Mechanisms of III-V Nanostructures by Selective Area Epitaxy

Didem Dede

Selective area epitaxy (SAE), applied to semiconductor growth, allows tailored fabrication of intricate structures at the nanoscale with enhanced properties and functionalities. In the field of nanowires (NWs), it adds scalability by enabling the fabricati ...

EPFL2024

Investigation of room-temperature single-photon emitters in GaN-based materials and GaN/AlN quantum dots

Johann Nicolaï Stachurski

Over the past decade, quantum photonics platforms aiming at harnessing the fundamental properties of single particles, such as quantum superposition and quantum entanglement, have flourished. In this context, single-photon emitters capable of operating at ...

EPFL2024

III-N blue-emitting epi-structures with high densities of dislocations: Fundamental mechanisms for efficiency improvement and applications

Pierre Christophe Lottigier

Since the dawn of humanity, human beings seeked to light their surroundings for their well-being, security and development. The efficiency of ancient lighting devices, e.g. oil lamps or candles, was in the order of 0.03-0.04% and jumped to 0.4-0.6% with th ...

EPFL2024

Long live(d) CsPbBr3 superlattices: colloidal atomic layer deposition for structural stability

Raffaella Buonsanti, Alexander Nicolas Chen, Philippe Benjamin Green, Victoria Lapointe

Superlattice formation afforded by metal halide perovskite nanocrystals has been a phenomenon of interest due to the high structural order induced in these self-assemblies, an order that is influenced by the surface chemistry and particle morphology of the ...

Royal Soc Chemistry2024

Persistent enhancement of exciton diffusivity in CsPbBr3 nanocrystal solids

Seryio Saris

In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occup ...

Amer Assoc Advancement Science2024

Physical insights from the aspect ratio dependence of turbulence in negative triangularity plasmas

Stefano Coda, Justin Richard Ball

In this work, we study the impact of aspect ratio A = R 0 / r (the ratio of major radius R 0 to minor radius r) on the confinement benefits of negative triangularity (NT) plasma shaping. We use high-fidelity flux tube gyrokinetic GENE simulations and consi ...

Iop Publishing Ltd2024

Scalable Approaches to III-V Nanowires for Photodetection

Nicholas Paul Morgan

III-V semiconductor nanowires have unique properties that make them ideal for advanced photodetectors on inexpensive substrates. For example, they exhibit enhanced or polarization-dependent light absorption, they can form complex heterostructures, and thei ...

EPFL2023

GeSn as next-generation material for short-wave infrared single-photon detection

Andrea Giunto

In recent years, the automotive industry has aspired to bring self-driving vehicles to the general public and light detection and ranging (LiDAR) sensors have emerged as the preferred solution for car vision systems. At present, LiDAR technologies employ e ...

EPFL2023

From Layer-by-Layer Growth to Nanoridge Formation: Selective Area Epitaxy of GaAs by MOVPE

Alok Rudra, Anna Fontcuberta i Morral, Nicholas Paul Morgan, Marie Sophie Sanglé-Ferrière, Didem Dede, Valerio Piazza, Ann-Kristin Stief, Vladimir Dubrovskii

We outline the growth mechanismand shape evolution of GaAsnanoridges by selective area MOVPE with three well-identified, distinctstages of growth. ...

AMER CHEMICAL SOC2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

Voltage-driven Chemical Reactions Enable the Synthesis of Tunable Liquid Ga – Metal Nanoparticles

Raffaella Buonsanti, Anna Loiudice, Pascal Alexander Schouwink, Valery Okatenko, Coline Marie Agathe Boulanger, Alexander Nicolas Chen, Krishna Kumar

Nanosized particles of liquid metals are emerging materials which hold promise for applications spanning from microelectronics to catalysis. Yet, the knowledge of their chemical reactivity is largely unknown. Here, we study the reactivity of liquid Ga and ...

2023

Zn3P2 as an earth-abundant photovoltaic material: from growth to device

Rajrupa Paul

The development of cost-effective and earth-abundant semiconducting materials is imperative for the sustainable deployment of photovoltaic technology. Zinc phosphide (Zn3P2) is a promising candidate for terawatt-scale electricity generation. It has a near- ...

EPFL2023

Voltage-driven Reactivity of Liquid Ga and CuGa Nanoparticles for Electrocatalytic CO2 Reduction and Synthesis

Valery Okatenko

The rising atmospheric level of carbon dioxide, CO2, contributes to climate change and poses urgent need to find scalable solutions both to decrease its emissions and to be able to recycle it, if the goals of Paris Agreement to limit the temperature rise a ...

EPFL2023

Momentum-Space Imaging of Ultra-Thin Electron Liquids in δ-Doped Silicon

Nicolò D'Anna, Gabriel Aeppli

Two-dimensional dopant layers (δ-layers) in semiconductors provide the high-mobility electron liquids (2DELs) needed for nanoscale quantum-electronic devices. Key parameters such as carrier densities, effective masses, and confinement thicknesses for 2DELs ...

WILEY2023

Surface Chemistry Dictates the Enhancement of Luminescence and Stability of InP QDs upon c-ALD ZnO Hybrid Shell Growth

Raffaella Buonsanti, Anna Loiudice, Dragos-Constantin Stoian, Petru Pasquale Albertini, Ona Segura Lecina, Philippe Benjamin Green, Mark Adrian Newton, Jari Leemans

Indium phosphide quantum dots (InP QDs) are a promising example of Restriction of Hazardous Substances directive (RoHS)-compliant light-emitting materials. However, they suffer from low quantum yield and instability upon processing under ambient conditions ...

Amer Chemical Soc2023

Controlled Electronic and Magnetic Landscape in Self-Assembled Complex Oxide Heterostructures

Paul Muralt, Mihai Adrian Ionescu, Kanghyun Chu, Daesung Park

Complex oxide heterointerfaces contain a rich playground of novel physical properties and functionalities, which give rise to emerging technologies. Among designing and controlling the functional properties of complex oxide film heterostructures, verticall ...

Wiley-V C H Verlag Gmbh2023

GaN growth on ScAlMgO4 substrates via thermally-dewetted thin Al films

Elison de Nazareth Matioli, Alessandro Floriduz

In this note, we demonstrate the high-temperature growth of GaN on ScAlMgO4 substrates by metalorganic vapor phase epitaxy when a thin Al film is deposited ex situ on the ScAlMgO4 surface, prior to GaN growth. Mirror-like high-quality GaN epitaxial layers ...

IOP Publishing Ltd2022

Synthesis and properties of heterostructures in nanowires and 2-D materials

Akshay Balgarkashi

Modern solid-state devices were made possible by the discovery of semiconductor heterostructures. Heterostructures offer the ability to fabricate low-dimensional nanostructures such as quantum dots which can restrain carriers in all three-directions. Quant ...

EPFL2022

Controlled filamentation instability as a scalable fabrication approach to flexible metamaterials

Fabien Sorin, Louis Marie Philippe Martin-Monier, Pierre-Luc Eloi Piveteau, William Nicolas Duncan Esposito

Long and flexible arrays of nanowires find impactful applications in sensing, photonics, and energy harvesting. Conventional manufacturing relies largely on lithographic methods limited in wafer size, rigidity, and machine write time. Here, we report a sca ...

Nature Portfolio2022