Publications related to Design and characterization of a soft magneto-rheological miniature shock absorber for a controllable variable stiffness sole

Shearing and opening of a pre-existing discontinuity in response to fluid injection

Brice Tanguy Alphonse Lecampion, Ankit Gupta, Alexis Alejandro Sáez Uribe

We investigate the fluid-driven growth of a shear crack along a frictional discontinuity and its transition to hydraulic fracturing (sometimes referred to as hydraulic jacking) under plane-strain conditions. We focus on the case of a constant friction coef ...

2023

Shear strength and shear stiffness analysis of compacted Wyoming-type bentonite

Alessio Ferrari

Wyoming-type bentonite is one of the materials to be used as part of the Engineered Barrier System (EBS) in deep geological disposal facilities for the safe disposal of spent nuclear fuel.In the KBS-3 type repository, the canisters containing the spent fue ...

ELSEVIER2023

Modeling and analysis of miniaturized magnetorheological valve for fluidic actuation

Sofia Lydia Ntella

Fluidic actuation enables movement in a wide range of mechanical systems, from simple laboratory devices to more complex industrial machinery. Fluids are used to generate motion of mechanical pieces. The term "fluids" encompasses two types of technologies: ...

EPFL2023

Single-Well Pore Pressure Preconditioning for Enhanced Geothermal System Stimulation

Marie Estelle Solange Violay, Barnaby Padraig Fryer, Mathias Alexandre David Lebihain

The stress state is an important parameter in terms of both earthquake nucleation and rupture. Here, a new stimulation technique is proposed for Enhanced Geothermal Systems (EGSs), which have previously been burdened with a number of high-profile incidence ...

2023

Drained Clay-Pipe Interface Resistance at Low Normal Stresses and Elevated Temperatures

Roba Houhou

Offshore pipelines that transport hydrocarbons under high pressure and high temperature are usually thermally insulated to maintain an elevated temperature and prevent any heat loss to the surroundings. However, the temperatures at the outer-wall of the pi ...

AMER SOC CIVIL ENGINEERS2023

Hydro-mechanichal characterisation of bentonite/steel interfaces

Alessio Ferrari, Eleni Stavropoulou, Fabiana Sannasardo

The hydromechanical response of a Wyoming-type bentonite (MX-80) and its interface with steel was studied in terms of shear resistance under different hydration levels. A series of shear tests under constant normal stress were performed in total suction co ...

2023

Three-Dimensional Numerical Modelling of Al-Salam Storm Water Pumping Station in Saudi Arabia

Azin Amini, Azad Koliji

The Al-Salam Pump Station will be constructed in the framework of Jeddah Storm water Masterplan (JSWM) in Saudi Arabia. The station discharges the incoming flow from the Al-Salam storm tunnel to the Red Sea. Its structure includes a circular deep wet well ...

IAHR2022

Experimental quantification of 3D deformations in sensitive clay during stress-probing

Edward Carlo Giorgio Andò

Unique four-dimensional (4D) deformation data are collected during drained triaxial tests on intact specimens of a natural sensitive clay. This requires the development of a miniature triaxial cell for advanced stress path testing, specifically designed fo ...

ICE PUBLISHING2022

Multi-scale modeling of aggregate interlock phenomena in concrete

Mohit Pundir

In concrete structures, opened cracks contribute significantly to the transfer of shear and normal stresses through the contact forces occurring between fractured surfaces. Such contact forces are due to protruding asperities, engaged by interlocking and f ...

EPFL2021

State of the Art on Computational Design of Assemblies with Rigid Parts

Mark Pauly, Peng Song

An assembly refers to a collection of parts joined together to achieve a specific form and/or functionality. Designing assemblies is a non-trivial task as a slight local modification on a part's geometry or its joining method could have a global impact on ...

WILEY2021

Hydraulic Transport Through Calcite Bearing Faults With Customized Roughness: Effects of Normal and Shear Loading

Marie Estelle Solange Violay, Mateo Alejandro Acosta

Understanding fluid flow in rough fractures is of high importance to large scale geologic processes and to most anthropogenic geo‐energy activities. Here we conducted fluid transport experiments on Carrara marble fractures with a novel customized surface t ...

2020

Flexible Support for Gas-Lubricated Bearing Bushings

Jürg Alexander Schiffmann

Herringbone-grooved journal bearings (HGJBs) for high-speed turbo-machinery are often supported on O-rings due to their favorable stiffness and damping characteristics for stability and alignment reasons. They yield limited lifetime at high temperatures, i ...

2020

Design optimization of Miniature Magnetorheological Valves with Self-Sensing Capabilities Used for a Wearable Medical Application

Yves Perriard, Yoan René Cyrille Civet, Sofia Lydia Ntella, Minh Trung Duöng

Magnetorheological (MR) fluids are materials characterized as “intelligent” since their rheological properties may be controlled by the excitation of an external magnetic field. The application of the latter brings the fluid from a liquid to a semi-solid s ...

IEEE2020

Can automotive MEMS be reliably used in space applications? An assessment method under sequential bi-parameter testing

Maxime Auchlin, Volker Gass, Olha Sereda

Commercial Off-The-Shelf (COTS) automotive inertial measurement units were subjected to severe accumulative stress conditions: thermal shocks (high temperature gradients), temperature cycling (low gradients) and mechanical vibration are combined in an A-th ...

PERGAMON-ELSEVIER SCIENCE LTD2020

A practical method for seismic retrofit of tall buildings with supplemental damping

Dimitrios Lignos

Current simplified design methods for buildings with supplemental damping devices are mainly based on single-degreefreedom (SDF) shear-models. Common errors of such methods are attributed to the linearization of nonlinear damping and stiffness, higher buil ...

CEI / SCE2019

Durability of adhesively bonded joints between pultruded GFRP adherends under hygrothermal and natural ageing

Thomas Keller, Joào Pedro Girâo Meireles de Sousa

This paper presents an experimental and numerical study about the durability of adhesively bonded joints between pultruded glass fibre reinforced polymer (GFRP) adherends for civil engineering applications. Single lap joint (SLJ) specimens were manufacture ...

ELSEVIER SCI LTD2019

Analysis of morphological and haemodynamical indexes in abdominal aortic aneurysms as preliminary indicators of intraluminal thrombus deposition

Alfio Quarteroni, Simone Deparis, Claudia Maria Colciago

In this paper we study the correlation between the Wall Shear Stress (WSS), a haemodynamical index derived from numerical simulations, and an new index MFA-ILT for the characterisation of intraluminal thrombus (ILT) in presence of abdominal aortic aneurysm ...

2020

Periodic cellular aluminum structures for space applications : from casting to additive manufacturing

Florian Thibaut Gallien

Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...

EPFL2018

Micro-mechanical finite element modeling for in-plane behavior of historical masonry

Shenghan Zhang

Seismic assessment of unreinforced masonry structures remains a challenge. This dissertation investigates the in-plane behavior of historical masonry elements and proposes an advanced simulation method based on the cohesive zone model (CZM) in a finite ele ...

EPFL2018

Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions

Aurelio Muttoni, Miguel Fernández Ruiz, João Tiago Ramos Bernardo de Santa Rita Simões

In 1960, Kinnunen and Nylander presented a mechanical approach for calculating the punching resistance of slab-column connections. That approach accounted for the response of a slab sector and considered failure to occur on the basis of the strains develop ...

2018