Roland LogéRoland Logé is an associate professor at EPFL, with a primary affiliation to the Materials Institute, and a secondary affiliation to the Microengineering Institute.
After graduating in 1994 at UCL (Belgium) in Materials Engineering, he earned a Master of Science in Mechanics in 1995, at UCSB Santa Barbara (USA). He received his PhD at Mines Paristech-CEMEF (France) in 1999, where he specialized in metal forming and associated microstructure evolutions. After a postdoc at Cornell University (USA) between 1999 and 2001, he entered CNRS in France.
In 2008, he was awarded the ALCAN prize from the French Academy of Sciences, together with Yvan Chastel.
In 2009 he became head of the Metallurgy-Structure-Rheology research group at CEMEF.
In 2011, he launched a “Groupement de Recherche” (GDR), funded by CNRS, networking most of the researchers in France involved in recrystallization and grain growth.
In 2013, he became Research Director at CNRS.
In March 2014 he joined EPFL as the head of the Laboratory of Thermomechanical Metallurgy.
Cyril CayronMes recherches: J'ai travaillé comme microscopiste/cristallographe/métallurgiste sur des projets très variés comme les aciers pour le nucléaire, les alliages titane et nickel pour l'aéronautique, les interconnections en cuivre pour la microélectronique, les piles à combustible haute et basse température, le silicium photovoltaïque hétérojonction et monolike, les batteries au lithium à base de LiFePO4 et silicium. Derrière la plupart de ces sujets de recherche appliquée se cachent des problèmes de recherche fondamentale comme celui lié aux transformations de phases. J'ai donc été amené à travailler sur ce sujet passionnant et j'ai pu démontrer que les variants cristallographiques générés par des transitions structurales forment une structure algébrique de groupoïde. Ces travaux ont mené au développement du logiciel de reconstruction des grains parents à partir de données EBSD appelé ARPGE et distribué dans plus de 20 pays. En 2013-2015 j'ai proposé un nouveau modèle cristallographique pour les transformations martensitiques fcc-bcc dans les aciers, comme une alternative à la théorie phénoménologique de la transformation martensitique. Ce modèle a été depuis étendu aux transformations fcc-hcp (type cobalt), bcc-hcp (type titane) et bcc-fcc (type laiton), ainsi qu’à differents modes de maclage mécanique dans les métaux fcc et hcp. Ce modèle à sphères dures montre que la transformation implique une «distorsion angulaire», forme plus générale que le cisaillement. Le modèle prévoit la possibilité que le plan d’interface de certaines macles mécaniques ne soit pas un plan invariant. Un tel cas de maclage « exotique » a été observé expérimentalement par EBSD en 2017 dans un monocristal de magnésium pur. Je travaille maintenant à définir de manière algébrique les concepts de variants (orientation, distortion, correspondance), et sur les types de macles mécaniques (I, II, et d'autres oubliés des théoriques classiques). Mon parcours : 2014-maintenant: Collaborateur scientifique à l'EPFL/LMTM, Neuchâtel, Suisse. J'aide le professeur Roland Logé dans ses travaux de recherche sur les liens entre les fortes déformations, les textures, les tailles de grains et les transformations de phases (diffusives et displacives). Je suis en charge de la salle de métallographie et des caractérisations SEM, EDS, EBSD, TEM, HRTEM. Je codirige trois thèses (Annick Baur, Margaux Larcher, Céline Guidoux). Je suis reviewer pour Acta Mater., Scripta Mater., Acta Cryst., J. Appl. Cryst., Mater. Charact., etc. 2000-2014: Ingénieur de recherche et responsable du groupe Nanocaractérisation, CEA/LITEN, Grenoble, France. 2012 : Habilitation à Diriger des Recherches (HDR). 1996-2000: Thèse sur l'étude par microscopie électronique de composites à matrice aluminium. Directeur de thèse Philippe Buffat, CIME, EPFL, Lausanne, Suisse. J'ai pu montrer un lien cristallographique entre différentes phases des alliages 2xxx et 6xxx et proposer pour la première fois une structure complète pour la phase beta prime des nanoprécipités. 1995-1996: Scientifique du contingent, travail sur les écrans électrochromes, COGIDEV, Rueil-Malmaison, France, fondé par M. André Giraud, ancien ministre de la défense et ancien ministre de l’industrie. 1992-1995: Ecole Nationale Supérieure des Mines de Nancy, France
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Michel RappazAprès un doctorat en physique du solide (1978) de l’Ecole Polytechnique Fédérale de Lausanne (EPFL), un post-doc à Oak Ridge National Laboratory, Michel Rappaz rejoint l’Institut des matériaux de l’EPFL en 1981. Après un passage de deux ans dans un bureau d’ingénieurs, il revient à l’EPFL en 1984 où il est nommé Professeur titulaire en 1990, puis Professeur ordinaire en 2003. Après sa retraite de l’EPFL en 2015, il est actuellement Professeur émérite et consultant indépendant auprès de divers centres de recherche et industries.
Ses principaux centres d’intérêt sont les transformations de phase et la solidification, en particulier le couplage des aspects macroscopiques de transferts de chaleur et de masse à l’échelle des procédés avec les aspects microscopiques de germination-croissance des microstructures et des défauts. Parmi ses diverses réalisations, on peut mentionner le développement d’Automates Cellulaires couplés avec la méthode d’Eléments Finis (modèle CAFE) pour la prédiction des structures de grains en solidification, le développement de modèles granulaires pour la fissuration à chaud, l’application de la méthode de champ de phase pour la compréhension de diverses microstructures, la découverte de la germination assistée dans certains alliages par des phases quasicrystallines, ainsi que de nombreuses études touchant aussi bien les aspects fondamentaux de formation des structures que des aspects plus appliqués des procédés.
Certains modèles développés dans son laboratoire ont été commercialisés par une spin-off fondée en 1991 (Calcom SA), faisant partie actuellement du groupe français ESI. Michel Rappaz a initié en 1992 un cours annuel de formation continue en solidification, suivi à ce jour par plus de 900 participants venant d’une quarantaine de pays. Il collabore actuellement avec une autre spin-off du laboratoire fondée en 2014, Novamet SàrL.
Michel Rappaz a reçu de nombreux prix et distinctions, en particulier le prix Mathewson de co-auteur (1994) et auteur (1997) de l’American Mineral, Metals and Materials Society (TMS), le prix de la fondation Koerber avec les Profs Y. Bréchet et M. Asbby (1996), la médaille Sainte-Claire Deville (1996) et la Grande Médaille (2011) de la Société Française des Matériaux (SF2M), le prix Bruce Chalmers de la TMS (2002), le prix Mc Donald Memorial Lecture du Canada (2005), la médaille d’or de la Société Européenne des Matériaux (FEMS, 2013) et le prix Brimacombe de la TMS (2015). Il fait partie des “Highly-Cited Authors” de ISI, il est fellow des sociétés ASM, IOP et TMS, et a écrit plus de 200 publications et deux livres.
Jean-Marie Drezet1992-1996: travail de thèse au Laboratoire de Métallurgie Physique sous la direction du Prof. Michel Rappaz, http://library.epfl.ch/theses/?display=detail&nr=1509 1997-2000: projet EMPACT (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: projet VIRCAST (European Virtual Casting) 2005-2006: projet Etude du sciage des barres à laminer (Alcan Fonds) 2005-2006: projet WelAIR (Welding of Airframes, EADS) 2005-2008: soudage faisceau d'électrons des Cu-Cr-Zr (CEA, France) 2006-2008: soudage laser des Al-Li (EADS, France) 2008-2011: co-direction avec le Prof. A. Nussbaumer de la thèse de C. Acevedo sur l'influence des contraintes residuelles sur le desgin en fatigue des joints tubulaires soudés, http://library.epfl.ch/theses/?nr=5056 2007-2011: co-direction avec le Prof. J.-F. Molinari de la thèse de K. Shahim sur la dilatation ventriculaire dans l'hydrocéphalie à pression normale (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-direction avec le Prof. M. Rappaz de la thèse de M. Sistaninia sur la simulation de la fissuration par modèles granulaires (Projet CCMX-MERU) 2010-2014: direction avec le Prof. M. Rappaz de la thèse de N. Chobaut sur la simulation des contraintes lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) 2011-2015: direction avec le Prof. H. Van Swygenhoven-Moens de la thèse de P. Schloth sur l'étude de la précipitation lors de la trempe de pièces épaisses en alliage d'aluminium à durcissement structural (Projet CCMX-MERU) Philippe SpätigPhilippe Spätig is currently Adjunct Professor at EPFL in the School of Basic Sciences, in the Laboratory of Reactor Physics and Systems Behaviours. He obtained his diploma of Engineer Physicist at EPFL in 1991 and his PhD at EPFL in 1995 on the role of thermal activation in the plasticity of the intermetallic Ni3Al. From 1995 to 1997, he worked as postdoc in the Materials Group of the Center for Research in Plasma Physics at EPFL, studying the effects of high-energy proton irradiation on alloys and pure metals. He then moved to the University of California Santa Barbara and spent two years in the group of Professor G.R. Odette, working on fracture mechanics of ferritic structural steels. He joined again the Materials Group of the Center for Research in Plasma Physics at EPFL in 2000 and worked in this group until the end of 2012. His research was focused on irradiation hardening and embrittlement of steels, as well as on the development of oxide dispersion strengthened steels. He also worked and developed experimental and analytical small specimen test techniques to reliably extract mechanical properties from limited material volume. In 2013, he joined the Laboratory for Nuclear Materials at Paul Scherrer Institute, while being associated with the Laboratory for Reactor Physics and System Behaviours at EPFL. Since then he mainly works on environmentally-assisted fatigue and fracture on austenitic and pressure vessel steels, where the effects of light water reactor environment on mechanical properties are investigated.
Daniele MariDaniele Mari was born in Milan in 1961, After a scientific high school degree obatained in Italy Daniele Mari joins EPFL in 1980 and graduates in Physics in 1986. In 1991, he obtains the Ph.D. from the same institution working in the field of metal-ceramic composites. From 1992 to 1993 he continues his research as a post-doc at the Massachusetts Institute of Technology with a work on shape-memory alloys. In 1993, he joins the company Amysa Yverdon SA (Switzerland) as director of Research and Development and creates ACME (Advanced Composite & Microwave Engineering) with activities in the fields of the electromagnetic heating and materials science. In parallel with his industrial activities, D. Mari has supervised different research projects in materials science at the EPFL. In 2004 he joins the Laboratoire de Physique de la Matière Complexe to develop mechanical spectroscopy in the field of hard materials and steels. He is appointed MER in 2012. Since then he is responsible for the Physics Laboratories (for student training) and Auditoriums. Since 2013 D. Mari is the Deputy Director of the Physics School.
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Peter RyserDr. Peter Ryser is a Professor Emeritus at the Swiss Federal Institute of Technology in Lausanne. He has over three decades of research and teaching experience from various corporate and academic institutions. He was previously a Director at Siemens Building Technologies where he was responsible for R&D, product innovation and patents. Dr. Ryser has a Ph.D. in applied Physics from the University of Geneva, a Masters degree in Experimental Physics and an MBA.
Emmanuel DenariéEmmanuel Denarié is a civil engineer, with a PhD in Materials Science. He worked for 3 years in a civil engineering company where he was in charge of the design of structures and the maintenance of bridges. He has 30 years’ experience on research and applications in the field of building materials, advanced concretes, and rehabilitation of reinforced concrete structures. He is since 2000 senior scientist and lecturer in the Laboratory for Maintenance and Safety of structures, at Ecole Polytechnique Fédérale de Lausanne (EPFL), in charge of research and development activities on the application of concretes and advanced cementitious materials to the improvement of existing and new structures. In 2013, under the lead of Emmanuel Denarié, in cooperation with CEREMA, Subdivision des Phares et Balises from Lorient, and Lafarge, a turret at sea (Le Cabon, Brittany, France) was reinforced by a cast on site 60 mm thick UHPFRC shell. The strain hardening mix was developed jointly with Lafarge. This successful application in extreme conditions of access and restraint of the substrate (thin ring geometry) opened the way to large-scale industrial applications of UHPFRC for the reinforcement of existing structures.
Heinrich HofmannOriginaire de Mellingen (AG), Heinrich Hofmann est né en 1953. Après des études d'ingénieur en soudures (Ing. grad.) à Duisburg (D), et d'ingénieur en science des matériaux à la Technische Hochschule de Berlin, il obtient le titre de docteur ingénieur en 1983 pour une thèse dans le domaine des matériaux.De 1983 à 1985, il travaille comme assistant scientifique au Laboratoire de Technologie des Poudres de l'Institut Max Planck pour la science des matériaux à Stuttgart. En 1985 il entre au Centre de Recherche et Développement d'Alusuisse-Lonza à Neuhausen-am-Rheinfall, en tant qu'ingénieur consacré à la recherche dans l'étude et le développement des procédés de synthèse des poudres céramiques.En 1993 il entre à l'EPFL en tant que professeur extraordinaire et directeur du Laboratoire de technologie des poudres du Départmeent des matériaux. Son enseignement porte sur les céramiques I (procédés) et les phénomènes de transfert. Son domaine de recherche couvre la synthèse des poudres minérales, leur caractérisation et la modification des surfaces, ainsi que la mise en forme et le frittage. Ses recherches incluent aussi les matériaux nanostructurés (composites semi-conducteurs et polymères) et la métallurgie des poudres. Hofmann Heinrich, Prof. Dr.-Ing. got his PhD in Material Science with a thesis prepared at the Powder Metallurgy Laboratory at the Max Planck Institute in Stuttgart. In 1985 he joins the R&D center of Alusuisse-Lonza Services AG, at Neuhausen-am-Rheinfall. In 1993 he joins the Swiss Federal Institute of Technology as Professor and Director of the Powder Technology Laboratory at the Department of Materials science and engineering. His research area includes the synthesis of nanostructured materials based on nanoparticles and the modification of surfaces with nanoparticles using colloidal methods. The fields of application of such materials are medical and biological, (drug delivery, hyperthermia, cell separation, biosensors), electronics and sensors.
Philippe GilletPhilippe GILLET est entré à lEcole normale supérieure de la rue dUlm (Paris) pour y mener des études en sciences de la Terre. En 1983, il obtient un PhD en géophysique à luniversité de Paris VII et rejoint luniversité de Rennes I comme assistant. En 1988, titulaire dun doctorat dEtat, il devient professeur dans cette même université et la quitte en 1992 pour rejoindre Ecole normale supérieure de Lyon.
La formation des chaînes de montagnes, et des Alpes en particuliers, est lobjet de la première partie de sa carrière scientifique. En parallèle, il développe des techniques expérimentales (cellules à enclumes de diamants)qui permettent de simuler en laboratoire les conditions de pression et de température qui règnent au sein des planètes. Lobjectif de ces expériences est de comprendre de quels matériaux sont constituées les profondeurs inatteignables des planètes du système solaire.
En 1997, il commence à travailler sur la matière extraterrestre. Il participe à la description de météorites venant de Mars, de la Lune ou de planètes aujourdhui disparues et explique comment celles-ci ont été expulsées de leur planète dorigine par des chocs titanesques avant darriver sur Terre. Il a aussi participé au programme STARDUST de la NASA et contribué à lidentification de grains de comète ramenés sur Terre après avoir été capturés au voisinage de la comète Wild-II. Ces grains représentent les premiers minéraux de notre système solaire, formés il y a plus de 4,5 milliards dannées. Il a aussi travaillé sur les sujets suivants :
interactions entre bacteries et minéraux;
amorphisation sous pression;
techniques expérimentales: cellule à enclumes de diamant, spectroscopie Raman,diffraction des RX sur source synchrotron, microscopie électronique.
Philippe Gillet a aussi une activité de management de la science et de lenseignement. Il a ainsi dirigé lInstitut National des Sciences de lUnivers du CNRS (France), présidé le synchrotron français SOLEIL, lAgence Nationale de la Recherche française(2007) et lEcole normale supérieure de Lyon. Avant de rejoindre lEPFL il a été le directeur de cabinet du Ministre français de la Recherche et de lEnseignement Supérieur.
Quelques publications :
Ferroir, T., L. Dubrovinsky, A. El Goresy, A. Simionovici, T. Nakamura, and P. Gillet (2010), Carbon polymorphism in shocked meteorites: Evidence for new natural ultrahard phases, Earth and Planetary Science Letters, 290(1-2), 150-154
Barrat J.A., Bohn M., Gillet Ph., Yamaguchi A. (2009) Evidence for K-rich terranes on Vesta from impact spherules. Meteoritics & Planetary Science, 44, 359374.
Brownlee D, Tsou P, Aleon J, et al. (2006) Comet 81P/Wild 2 under a microscope. Science, 314, 1711-1716.
Beck P., Gillet Ph., El Goresy A., and Mostefaoui S. (2005) Timescales of shock processes in chondrites and Martian meteorites. Nature 435, 1071-1074.
Blase X., Gillet Ph., San Miguel A. and Mélinon P. (2004) Exceptional ideal strength of carbon clathrates. Phys. Rev. Lett. 92, 215505-215509.
Gillet Ph. (2002) Application of vibrational spectroscopy to geology. In Handbook of vibrational spectroscopy, Vol. 4 (ed. J. M. Chalmers and P. R. Griffiths), pp. 1-23. John Wiley & Sons.
Gillet Ph., Chen C., Dubrovinsky L., and El Goresy A. (2000) Natural NaAlSi3O8 -hollandite in the shocked Sixiangkou meteorite. Science 287, 1633-1636.