Frédéric CourbinAprès ses études de physique fondamentale à l'Université de Paris-XI (Orsay, France), Frédéric Courbin effectue sa thèse de doctorat entre l'Institut d'Astrophysique de l'Université de Liège (Belgique), l'Observatoire de Paris (France) et l'Observatoire Européen Austral (ESO, Allemagne). En 1999, il quitte l'Europe pour trois ans, afin de poursuivre ses recherches sous le ciel pur du Chili, où l'ESO vient de terminer la construction de son VLT (Very Large Telescope), dans le désert de l'Atacama. En 2004, après un séjour de 2 ans à l'Université de Liège comme chercheur "Marie Curie", Frédéric Courbin rejoint le Laboratoire d'Astrophysique de l'EPFL où il est actuellement professeur. Ses sujets de recherche principaux se situent en cosmologie et en astrophysique extragalactique, ainsi qu'en traitement du signal. En 2018, il obtient un financement Européen (ERC Advanced grant) lié à son travail en cosmologie avec les lentilles gravitationnelles. A l'EPFL il est membre de la commission de l'école doctorale en physique (EDPY) et à été le tuteur de plus de 30 étudiants en thèse à ce jour. Depuis 2018, il est membre du Conseil de Faculté des Sciences de Bases et de l'assemblée d'école depuis 2020.
Ambrogio FasoliAmbrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Cyril CayronMes recherches: J'ai travaillé comme microscopiste/cristallographe/métallurgiste sur des projets très variés comme les aciers pour le nucléaire, les alliages titane et nickel pour l'aéronautique, les interconnections en cuivre pour la microélectronique, les piles à combustible haute et basse température, le silicium photovoltaïque hétérojonction et monolike, les batteries au lithium à base de LiFePO4 et silicium. Derrière la plupart de ces sujets de recherche appliquée se cachent des problèmes de recherche fondamentale comme celui lié aux transformations de phases. J'ai donc été amené à travailler sur ce sujet passionnant et j'ai pu démontrer que les variants cristallographiques générés par des transitions structurales forment une structure algébrique de groupoïde. Ces travaux ont mené au développement du logiciel de reconstruction des grains parents à partir de données EBSD appelé ARPGE et distribué dans plus de 20 pays. En 2013-2015 j'ai proposé un nouveau modèle cristallographique pour les transformations martensitiques fcc-bcc dans les aciers, comme une alternative à la théorie phénoménologique de la transformation martensitique. Ce modèle a été depuis étendu aux transformations fcc-hcp (type cobalt), bcc-hcp (type titane) et bcc-fcc (type laiton), ainsi qu’à differents modes de maclage mécanique dans les métaux fcc et hcp. Ce modèle à sphères dures montre que la transformation implique une «distorsion angulaire», forme plus générale que le cisaillement. Le modèle prévoit la possibilité que le plan d’interface de certaines macles mécaniques ne soit pas un plan invariant. Un tel cas de maclage « exotique » a été observé expérimentalement par EBSD en 2017 dans un monocristal de magnésium pur. Je travaille maintenant à définir de manière algébrique les concepts de variants (orientation, distortion, correspondance), et sur les types de macles mécaniques (I, II, et d'autres oubliés des théoriques classiques). Mon parcours : 2014-maintenant: Collaborateur scientifique à l'EPFL/LMTM, Neuchâtel, Suisse. J'aide le professeur Roland Logé dans ses travaux de recherche sur les liens entre les fortes déformations, les textures, les tailles de grains et les transformations de phases (diffusives et displacives). Je suis en charge de la salle de métallographie et des caractérisations SEM, EDS, EBSD, TEM, HRTEM. Je codirige trois thèses (Annick Baur, Margaux Larcher, Céline Guidoux). Je suis reviewer pour Acta Mater., Scripta Mater., Acta Cryst., J. Appl. Cryst., Mater. Charact., etc. 2000-2014: Ingénieur de recherche et responsable du groupe Nanocaractérisation, CEA/LITEN, Grenoble, France. 2012 : Habilitation à Diriger des Recherches (HDR). 1996-2000: Thèse sur l'étude par microscopie électronique de composites à matrice aluminium. Directeur de thèse Philippe Buffat, CIME, EPFL, Lausanne, Suisse. J'ai pu montrer un lien cristallographique entre différentes phases des alliages 2xxx et 6xxx et proposer pour la première fois une structure complète pour la phase beta prime des nanoprécipités. 1995-1996: Scientifique du contingent, travail sur les écrans électrochromes, COGIDEV, Rueil-Malmaison, France, fondé par M. André Giraud, ancien ministre de la défense et ancien ministre de l’industrie. 1992-1995: Ecole Nationale Supérieure des Mines de Nancy, France
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Aurelio BayAurelio Bay graduated in physics at the University of Lausanne (UNIL) in 1980 and got his PhD degree from the same institution in 1986 for a work on the determination of the axial form factor of the ? meson.
He then went to Lawrence Berkeley Laboratories (LBL), USA as a post doc for two years, where he worked on the TPC/2? Electromagnetic Calorimeter and the SSC/LHC detector. He then came back to Europe and was named Maître Assistant at University of Geneva till 1994, where he started working at the L3 experiment of LEP at CERN.
He was appointed Assistant Professor at the University of Lausanne in 1994 and Full Professor in 1998, continuing working at LEP, LEP2 and LHCb at CERN , and starting a collaboration at BELLE experiment at KEK, Tsukuba (Japan).
At the University of Lausanne he was Director of the Institute of High Energy Physics, Deputy Director of the Physics Department and Deputy of the Dean of the Faculty of Sciences.
In 2003, following the merge of UNIL physics department into the EPFL School of Basic Sciences, he was appointed Full Professor at Ecole Polytechnique Fédérale de Lausanne (EPFL), and Director of the EPFL Laboratory of High Energy Physics.
Roberto CastelloRoberto Castello is a senior scientist and group leader at the EPFL Laboratory of Solar Energy and Building Physics. Physicist by training, he has extensive experience in collecting, classifying and interpreting large datasets using advanced data mining techniques and statistical methods. He received his MSc (2007) in Particle Physics and PhD (2010) in Physics and Astrophysics from the University of Torino. He worked as a postdoctoral researcher at the Belgian National Research Fund (2011-2014) and at the CERN Experimental Physics Department (2015-2017) as a research fellow and data scientist. He is primary author of more than 20 peer-reviewed publications and he presented at major international conferences in the high energy physics domain.
In 2018 he joined the Solar Energy and Building Physics Laboratory (LESO-PB) to work on data mining and Machine Learning techniques for the built environment and renewable energy. His main research interests are: spatio-temporal modeling of renewable energy potential, energy consumption forecasting techniques, anomaly detection, and computer vision techniques for automated classification in the built environment.
He leads the group of Urban Data Mining, Intelligence and Simulation at LESO-PB and he is a member of the NRP75 Big Data project (HyEnergy) of the Swiss National Science Foundation. He is a member of the Swiss Competence Centre for Energy Research (SCCER) and deputy leader of the working group on Leveraging Ubiquitous Energy Data. He has served as a scientific committee member, workshop organizer and speaker at international conferences (ICAE 2020, Applied Machine Learning Days 2019 and 2020, CISBAT 2019 and 2021 and SDS2020).
Since 2017 he is member of the Geneva 2030 Ecosystem network, promoting the United Nations agenda towards the realization of the Sustainable Development Goals (SDGs).
