Recherche

Afficher tous les résultats pour

Accueil

Catégorie

Soudage

Applied sciences
Génie chimique
Science des matériaux
Soudage

À propos
Confidentialité
Mentions légales

Graph Chatbot

Publications associées (28)

Experimental Investigation of Instability-Free Welded Moment Connections With Simplified Weld Details

Dimitrios Lignos, Andronikos Skiadopoulos

In capacity designed steel moment resisting frames, inelastic deformations are mostly concentrated in the steel beams and the column fixed ends of the first story. This design concept limits the participation of the column web’s panel zone in the energy di ...

2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening

Ke Huang, Yandong Jing

Wire-arc directed energy deposition (wire-arc DED), recognized for its ability to produce large-scale parts, has gained considerable attention. However, a critical issue with this method is the high prevalence of internal porosity defects found in the manu ...

Elsevier Science Sa2023

Hysteretic behaviour of welded connections with highly inelastic panel zones

Dimitrios Lignos, Andronikos Skiadopoulos

The current practice in capacity-designed steel moment resisting frames (MRFs) worldwide allows for limitedshear yielding in the column web panel zone. As such, inelastic deformations concentrate near the beam ends, thereby leading to flexural stre ...

Ernst & Sohn2023

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

Realistic Modelling of Dynamics at Nanostructured Interfaces Relevant to Heterogeneous Catalysis

Kevin Rossi

The focus of this short review is directed towards investigations of the dynamics of nanostructured metallic heterogeneous catalysts and the evolution of interfaces during reaction-namely, the metal-gas, metal-liquid, and metal-support interfaces. Indeed, ...

MDPI2022

Experimental Investigation of the Inelastic Cyclic Behavior of Concrete-Filled Double-Skin Tubular Beam-Columns with Corrugated Inner Skins and Ultrahigh-Strength Corner Tubes

Mojtaba Farahi, Dimitrios Lignos

This paper presents the experimental results from nine full-scale concrete-filled double-skin tubular (CFDST) beam-columns. The test specimens exploited two fabrication strategies, featuring either hollow steel inner skins with corrugated geometry or ultra ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Generation of elastic geodesic gridshells with anisotropic cross sections

Olivier Baverel, Corentin Jean Dominique Fivet, Nicolas Robin Montagne

Geodesic gridshells are shell structures made of continuous elements following geodesic lines. Their properties ease the use of beams with anisotropic cross-sections by avoiding bending about their strong axis. However, such bending may arise when flatteni ...

2021

Reliability analysis of welded stud shear connectors on simply-supported bridge girders

Scott Walbridge, Matthew James Sjaarda

This paper examines the reliability of welded stud shear connectors for steel-concrete composite bridge girders. A finite element model of a simply-supported bridge was created featuring link connector elements representing the shear studs between beam and ...

CANADIAN SCIENCE PUBLISHING2021

Experimental Evaluation of Steel Columns under Seismic Hazard-Consistent Collapse Loading Protocols

Dimitrios Lignos

This paper presents results from 21 large-scale experiments on steel columns that examined their collapse behavior as related to steel moment resisting frames (MRFs). The test specimens included wide-flange and square hollow structural shapes (HSS) and wer ...

2021

Development of Lamb wave resonators in thin film X-cut lithium niobate

Muhammad Faizan

Microelectromechanical systems (MEMS) is among the most revolutionary technologies of 21st century, with the applications ranging from industrial systems to consumer electronics. Using MEMS in battery-powered wireless devices has long been seen as the evol ...

EPFL2021

Adaptive Laser Welding Control: A Reinforcement Learning Approach

Silvio Zanoli, Giulio Masinelli

Despite extensive research efforts in the field of laser welding, the imperfect repeatability of the weld quality still represents an open topic. Indeed, the inherent complexity of the underlying physical phenomena prevents the implementation of an effecti ...

2020

Performance of Embedded Bolt Shear Connectors

Scott Walbridge, Matthew James Sjaarda

A laboratory research program carried out at the University of Waterloo featured the testing of three large-scale steel-concrete composite beam specimens with embedded bolt shear connectors. A detailed assessment of the connector performance was made, faci ...

TAYLOR & FRANCIS LTD2020

Recommendations for Improved Welding Procedures for Thick Steel Plates Through Thermo-Mechanical Analysis

Dimitrios Lignos

Welding of steel plates is accompanied by residual stresses that increase as the constraint provided by the welded components becomes greater. Consequently, crack initiation has been reported after welding thick plates due to the high residual stresses dev ...

2019

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

Jean-Marie Drezet

Near interfacial residual stresses are investigated in a joint composed of aluminum alloy and dual phase steel. A small step neutron diffraction scan was initially performed to determine the weld interface position along the measured transverse cross secti ...

ELSEVIER SCIENCE SA2019

Folded-Tube Soft Pneumatic Actuators for Bending

Wyatt Marshall Felt

This article presents a model and experimental results for a new class of bending soft pneumatic actuators (SPAs) made from a single section of thin-walled flexible tubing. The actuator is formed by creasing the tubing into fin-like rectangular folds and i ...

MARY ANN LIEBERT, INC2019

Basic creep of cement paste at early age - the role of cement hydration

Karen Scrivener, Pietro Lura

In this work, the uniaxial creep in compression during the first days of hydration is studied experimentally on cement pastes with w/c of 0.50. to order to assess the effect of the evolving microstructure on creep, the so-called equivalent systems are empl ...

Pergamon-Elsevier Science Ltd2019

Strain-based approach to fatigue crack initiation on high-strength-steel welded joints under multiaxial loading

Alain Nussbaumer, Martin Antonio René Garcia, Heikki Tapani Remes

A recently novel strain-based approach recently proposed by Remes (Remes 2013) for the fatigue strength modelling of welded steel joints is extended here to consider multiaxial loading conditions and three dimensions finite element models. Only the first s ...

CRC Press (Taylor & Francis)2019

Healing cracks in selective laser melting by 3D laser shock peening

Jamasp Jhabvala, Andreas Burn, Christian Leinenbach, Roland Logé, Nikola Kalentics, Hossein Ghasemi Tabasi, Navid Sohrabi

Selective Laser Melting (SLM) of Ni-based superalloys such as CM247LC is prone to weld-cracking. This paper investigates how to suppress cracks by repeatedly applying Laser Shock Peening (LSP) during the building phase of SLM. Samples made of CM247LC were ...

ELSEVIER2019

Multiaxial ultra low cycle fatigue in welded high strength steel structural components

Alain Nussbaumer, Albano António De Abreu E Presa De Castro E Sousa

Extreme events often subject regions of structural steel components to large inelastic strains. In conditions such as earthquakes, exceptional winds gusts or tides the loading scenario is cyclical, variable amplitude and frequently multiaxial in nature, an ...

2019

Page 1 sur 2