Publications associées à Odontologie conservatrice

Design of Customized Mouthguards with Superior Protection Using Digital-Based Technologies and Impact Tests

Dominique Pioletti, Naser Nasrollahzadeh Mamaghani, Martin Broome

Background In contact sports, an impact on the jaw can generate destructive stress on the tooth-bone system. Mouthguards can be beneficial in reducing the injury risk by changing the dynamics of the trauma. The material properties of mouthguards and their ...

Springer2024

Investigation of mycelium film as the adhesive for poplar veneer bonding: insight into interfacial bonding mechanisms

Wenjing Sun

The emergence of mycelium-bonded biocomposites has been stimulated in the quest for sustainable development. These biocomposites exhibit enhanced mechanical properties through hot pressing, with mycelium playing a crucial role as both the adhesive and rein ...

Taylor & Francis Ltd2024

Investigating neural resource allocation in the sensorimotor control of extra limbs

Giulia Dominijanni

The rise of robotic body augmentation brings forth new developments that will transform robotics, human-machine interaction, and wearable electronics. Extra robotic limbs, although building upon restorative technologies, bring their own set of challenges i ...

EPFL2024

All-Dielectric Nanophotonic via Glass Fluid Instabilities

Pierre-Luc Eloi Piveteau

In this thesis work, we propose to exploit an innovative micro/nano-fabrication process, based on controlled fluid instabilities of a thin viscous film of chalcogenide glass. Amorphous selenium and arsenic triselenide were used in this thesis work, and com ...

EPFL2024

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Slim: Explicit Slot-Intent Mapping With Bert For Joint Multi-Intent Detection And Slot Filling

Boi Faltings, Fei Mi, Fengyu Cai, Wanhao Zhou

Utterance-level intent detection and token-level slot filling are two key tasks for spoken language understanding (SLU) in task-oriented systems. Most existing approaches assume that only a single intent exists in an utterance. However, there are often mul ...

IEEE2022

Mechanical Reinforcement of Hydrogels through Physical Crosslinks and Double Network Granular Architecture

Alvaro Lino Boris Charlet

Throughout nature, organisms fabricate a myriad of materials to sustain their lifestyle. Many of the soft materials are composed of water-swollen networks of organic molecules, so-called hydrogels. They generally contribute to the mechanical integrity of t ...

EPFL2022

Improving filling level classification with adversarial training

Pascal Frossard, Andrea Cavallaro, Apostolos Modas

We investigate the problem of classifying - from a single image the level of content in a cup or a drinking glass. This problem is made challenging by several ambiguities caused by transparencies, shape variations and partial occlusions, and by the availab ...

IEEE2021

Electrical spinal cord stimulation protocols to regulate neurological functions after spinal cord injury

Salif Axel Komi

Spinal cord injury (SCI) is a life-changing event. People who suffer from it lose their ability to move normally and are subject to life-threatening symptoms. When the insult is not too severe, partial recovery is possible. Otherwise, for severely affected ...

EPFL2021

Hybrid granular hydrogels: combining composites and microgels for extended ranges of material properties

Dominique Pioletti, Pierre-Etienne Bourban, Peyman Karami, Céline Samira Wyss

Developing hydrogels with optimal properties for specific applications is challenging as most of these properties, such as toughness, stiffness, swelling or deformability, are interrelated. The improvement of one property usually comes at the cost of anoth ...

2020

A Multi-Step Reconfiguration Model for Active Distribution Network Restoration Integrating DG Start-Up Sequences

Sidi-Rachid Cherkaoui, Hossein Sekhavatmanesh

The ever-increasing penetration of Distributed Generators (DGs) in distribution networks suggests to enable their potentials in better fulfilling the restoration objective. The objective of the restoration problem is to resupply the maximum energy of loads ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020

High-Throughput Nanocapillary Filling Enabled by Microwave Radiation for Scanning Ion Conductance Microscopy Imaging

Aleksandra Radenovic, Georg Fantner, Sanjin Marion, Vytautas Navikas, Sebastian James Davis, Samuel Mendes Leitão

Solid-state nanopores provide a highly sensitive tool for single-molecule sensing and probing nanofluidic effects in solutions. Glass nanopipettes are a cheap and robust type of solid-state nanopore produced from pulling glass capillaries with opening orif ...

2020

Caries Detection with Near-Infrared Transillumination Using Deep Learning

Henry Markram, Felix Schürmann, Taylor Howard Newton, Francesco Casalegno

Dental caries is the most prevalent chronic condition worldwide. Early detection can significantly improve treatment outcomes and reduce the need for invasive procedures. Recently, near-infrared transillumination (TI) imaging has been shown to be effective ...

2019

Differentiating Parkinson's disease motor subtypes using automated volume-based morphometry incorporating white matter and deep gray nuclear lesion load

Bénédicte Marie Maréchal

Background Periventricular leukoaraiosis may be an important pathological change in postural instability gait disorder (PIGD), a motor subtype of Parkinson's disease (PD). Clinical diagnosis of PIGD may be challenging for the general neurologist. Purpose T ...

2020

Curable filler material for tubular structures

Andreas Schmocker

A radiopaque composition with low viscosity and increased photopolymerizability for application or filling of hollow structures is disclosed. Moreover, a method to apply and monitor the application and/or the photopolymerization of the composition are pres ...

2018

Long-term functionality of a soft electrode array for epidural spinal cord stimulation in a minipig model

Stéphanie Lacour, Grégoire Courtine, Giuseppe Schiavone, Jocelyne Bloch, Marco Capogrosso, Nicolas Vachicouras, Fabien Bertrand Paul Wagner, Florian Dylan Fallegger, Xiaoyang Kang, Beatrice Barra

Long-term biointegration of man-made neural interfaces is influenced by the mechanical properties of the implant materials. Substantial experimental work currently aims at replacing conventional hard implant materials with soft alternatives that can favour ...

IEEE2018

Calcium phosphate formation on titanium-based surfaces: bioactivity evaluated by in vitro methods

Weitian Zhao

The prediction of implant behaviors in vivo by the use of easy-to-perform in vitro methods is of great interest in biomaterials research. In the field of bone implants, it is commonly accepted that a spontaneous formation of a hydroxyapatite (HA) layer on ...

EPFL2018

Fixed and mobile-bearing total ankle prostheses: Effect on tibial bone strain

Alexandre Terrier, Xavier Crevoisier, Caroline Sieger Fernandes, Maïka Réane Guillemin

Background Total ankle replacement is associated to a high revision rate. To improve implant survival, the potential advantage of prostheses with fixed bearing compared to mobile bearing is unclear. The objective of this study was to test the hypothesis th ...

Elsevier2017

High Performance Tri-gate GaN Power MOSHEMTs on Silicon Substrate

Elison de Nazareth Matioli, Jun Ma

We demonstrate high-performance GaN power metal-oxide-semiconductor high electron mobility transistors (MOSHEMTs) on silicon substrate based on a nanowire tri-gate architecture. The common issue of partial removal of carriers by nanowire etching in GaN tri ...

Institute of Electrical and Electronics Engineers2017

Metal artefact reduction in computed tomography images by a fourth-order total variation flow

Alfio Quarteroni, Elena Faggiano

Permanent metallic implants, such as dental fillings and cardiac devices, generate streaks-like artefacts in computed tomography (CT) images. In this article, we propose a strategy to perform metal artefact reduction (MAR) that relies on the total variatio ...

Taylor & Francis Ltd2016