Publications associées à Réacteur nucléaire piloté par accélérateur

High brightness neutron source optimized for very high pulsed magnetic field experiments

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Olivier Sauter, Gabriele Merlo, Alberto Mariani

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...

IOP Publishing Ltd2024

Scenario optimization for the tokamak ramp-down phase in RAPTOR: A. Analysis and model validation on ASDEX Upgrade

Olivier Sauter, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré, Anna Teplukhina, Bernhard Sieglin

We discuss how the combination of experimental observations and rapid modeling has enabled to improve understanding of the tokamak ramp-down phase in ASDEX Upgrade. A series of dedicated experiments has been performed, to disentangle the effect of individu ...

Iop Publishing Ltd2024

Preliminary safety analysis of the TRANSMUTEX sub-critical reactor using the GeN-Foam multi-physics solver

Andreas Pautz, Carlo Fiorina, Thomas Arthur Louis Joseph Guilbaud

This work presents a preliminary safety analysis of the accelerator-driven system under development at TRANSMUTEX. It is a sub-critical lead-cooled fast reactor with a nominal power of 300 MWth having the following features: (1) an inert-matrix fuel; (2) a ...

Pergamon-Elsevier Science Ltd2023

HighNESS conceptual design report: Volume I

Mina Akhyani, Xiaoxue Han, Davide Campi, Sheng Xu

The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million ...

Ios Press2023

Integrated modelling of neon impact on JET H-mode core plasmas

Yann Camenen, Michele Marin

Nuclear fusion reactor plasmas will need to exhaust a significant proportion of energy flux through radiative processes, to enable acceptable divertor loads. This can be obtained by line radiation from impurities, injected from the plasma edge. There are h ...

IOP Publishing Ltd2023

Extension, validation, and optimization of Serpent/DYN3D/ATHLET code system for SFR applications

Vincenzo Anthony Di Nora

The sequence of codes Serpent/DYN3D has been developed by the Helmholtz-Zentrum Dresden-Rossendorf and successfully applied to core static and transient analyses of sodium-cooled fast reactors (SFRs). The successful application of the sequence to SFRs was ...

EPFL2023

HighNESS conceptual design report: Volume II. The NNBAR experiment

Mina Akhyani, Xiaoxue Han, Davide Campi, Sheng Xu

A key aim of the HighNESS project for the European Spallation Source is to enable cutting-edge particle physics experiments. This volume presents a conceptual design report for the NNBAR experiment. NNBAR would exploit a new cold lower moderator to make th ...

Ios Press2023

Electron temperature fluctuation measurements with Correlation Electron Cyclotron Emission in L-mode and I-mode plasmas at ASDEX Upgrade

Pedro Andres Molina Cabrera

The Correlation Electron Cyclotron Emission (CECE) diagnostic at ASDEX Upgrade (AUG) is used to investigate the features of outer core and pedestal (rho(pol) = 0.85-1.0) turbulence across confinement regime transitions. The I-mode confinement regime is a p ...

E D P SCIENCES2023

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

Understanding JET-C quiescent phases with edge harmonic magnetohydrodynamic activity and comparison with behaviour under ITER-like wall conditioning

Wilfred Anthony Cooper, Jonathan Graves, Daniele Brunetti, Alberto Mariani, Andreas Kleiner, Guillermo Bustos Ramirez

An analysis of edge localised mode-free (quiescent) H-mode discharges exhibiting edge harmonic magnetoydrodynamic activity in the JET-carbon wall machine is presented. It is observed that the otherwise quiescent pulses with multiple-n harmonic oscillations ...

IOP Publishing Ltd2022

Enhanced Solar-to-Fuel Efficiency of Ceria-Based Thermochemical Cycles via Integrated Electrochemical Oxygen Pumping

Sophia Haussener, Clemens Gregor Suter, Meng Lin

The solar thermochemical cycle based on ceria is a promising route for renewable fuel production. The solar-to-fuel efficiency of a thermochemical reactor is highly dependent on the oxygen removal during the reduction step. Conventional nitrogen sweeping ( ...

AMER CHEMICAL SOC2022

Technical and economic feasibility study of high-current HTS bus bars for fusion reactors

Kamil Sedlák, Rainer Wesche, Roberto Guarino

In this study, we present a technical and economic assessment of high-current HTS bus bars for primary use in fusion reactors. Our objective is to verify the technical feasibility of such conductors and, for this purpose, we carry out a conceptual design o ...

Elsevier2022

Design, prototyping, and thermo-mechanical modelling of a neutron spallation target impacted by high-energy proton-beam pulses in the n_TOF facility at CERN

Raffaele Esposito

This manuscript describes the design work and the R&D activities carried out for the third-generation neutron production target in the neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN). The facility is composed ...

EPFL2022

Design of a Collimation Section for the FCC-ee

Tatiana Pieloni, Bruce Roderik, Frank Zimmermann

The design parameters of the FCC-ee foresee operation with a total stored beam energy of about 20 MJ, exceeding those of previous lepton colliders by almost two orders of magnitude. Given the inherent damage potential, a halo collimation system is studied ...

JACoW Publishing2022

Neutronics Analyses of EU DEMO 2020 EC Port Configuration

Minh Quang Tran, René Chavan

The DEMOnstration fusion power plant (DEMO) is being developed within EUROfusion and one of the challenges is the integration of all the systems into a fusion reactor by designs that meet strict design criteria required for safe and reliable long-term reac ...

NUCLEAR SOCIETY SLOVENIA2021

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

Roland Logé, Nicola Colonna, Raffaele Esposito

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontall ...

2021

Towards the Validation of Noise Experiments in the CROCUS Reactor Using the TRIPOLI-4 Monte Carlo Code in Analog Mode

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Intrinsic neutron noise experiments offer a non-invasive manner to measure the prompt decay constant or reactivity of fissile systems. Using the fluctuations in the density of fission chains, one can infer the kinetics parameters via correlation analysis s ...

2021

X-point radiation, its control and an ELM suppressed radiating regime at the ASDEX Upgrade tokamak

Marco Wischmeier, Bernhard Sieglin

Future fusion reactors require a safe, steady state divertor operation. The required detached operation is, in tokamaks with metal walls, usually achieved by seeding of impurities, such as nitrogen. With strong seeding levels, the dominant radiation is emi ...

IOP Publishing Ltd2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021