Publications associées à Spallation

High brightness neutron source optimized for very high pulsed magnetic field experiments

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

DEMO toroidal field coil fast discharge unit integration studies

Roberto Guarino, Alberto Ferro

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

High power electrostatic beam splitter for a proton beamline

Mike Seidel, Hua Zhang

The High Intensity Proton Accelerator facility (HIPA) delivers a 590 MeV cw (50.6 MHz) proton beam with up to 1.4 MW beam power (2.4 mA) to spallation and meson production targets serving particle physics experiments and material research. The main acceler ...

2024

HighNESS conceptual design report: Volume II. The NNBAR experiment

Mina Akhyani, Xiaoxue Han, Davide Campi, Sheng Xu

A key aim of the HighNESS project for the European Spallation Source is to enable cutting-edge particle physics experiments. This volume presents a conceptual design report for the NNBAR experiment. NNBAR would exploit a new cold lower moderator to make th ...

Ios Press2023

HighNESS conceptual design report: Volume I

Mina Akhyani, Xiaoxue Han, Davide Campi, Sheng Xu

The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million ...

Ios Press2023

Commissioning of the novel Continuous Angle Multi-energy Analysis spectrometer at the Paul Scherrer Institut

Henrik Moodysson Rønnow, Felix Groitl, Jakob Lass

We report on the commissioning results of the cold neutron multiplexing secondary spectrometer CAMEA (Continuous Angle Multi -Energy Analysis) at the Swiss Spallation Neutron Source at the Paul Scherrer Institut, Switzerland. CAMEA is optimized for efficie ...

AIP Publishing2023

Preliminary safety analysis of the TRANSMUTEX sub-critical reactor using the GeN-Foam multi-physics solver

Andreas Pautz, Carlo Fiorina, Thomas Arthur Louis Joseph Guilbaud

This work presents a preliminary safety analysis of the accelerator-driven system under development at TRANSMUTEX. It is a sub-critical lead-cooled fast reactor with a nominal power of 300 MWth having the following features: (1) an inert-matrix fuel; (2) a ...

Pergamon-Elsevier Science Ltd2023

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

Design, prototyping, and thermo-mechanical modelling of a neutron spallation target impacted by high-energy proton-beam pulses in the n_TOF facility at CERN

Raffaele Esposito

This manuscript describes the design work and the R&D activities carried out for the third-generation neutron production target in the neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN). The facility is composed ...

EPFL2022

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Design of the third-generation neutron spallation target for the CERN's n_TOF facility

Raffaele Esposito, Marco Calviani

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, ...

IOS PRESS2020

First observation of spalling in tantalum at high temperatures induced by high energy proton beam impacts

Philippe Spätig, Elvis Fornasiere, Marco Calviani

Spalling in tantalum has been observed in an experiment aiming at testing an antiproton production target prototype at CERN’s HiRadMat Facility. The experiment consisted in impacting 47 intense and high-energy proton beams onto a target equipped with ten c ...

2020

The instrument suite of the European Spallation Source

Henrik Moodysson Rønnow, Paul Gregory Freeman, Markus Strobl, Ursula Bengaard Hansen, Michael Müller

An overview is provided of the 15 neutron beam instruments making up the initial instrument suite of the European Spallation Source (ESS), and being made available to the neutron user community. The ESS neutron source consists of a high-power accelerator a ...

2020

Improved neutron activation dosimetry for fusion

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Semin Kwak, Alessandro Pau, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Federico Nespoli, Marco Wischmeier, David Pfefferlé, Hamish William Patten, Nicola Vianello, Mikhail Maslov, Samuel Lanthaler, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Jonathan Marc Philippe Faustin, Liang Yao, Dalziel Joseph Wilson, Bernhard Sieglin, Otto Asunta

Neutron activation technique has been widely used for the monitoring of neutron fluence at the Joint European Torus (JET) whereas it is foreseen to be employed at future fusion plants, such as ITER and DEMO. Neutron activation provides a robust tool for th ...

2019

Investigations and numerical modeling of mechanical properties of tempered martensitic steel Eurofer97 at various loading rates, temperatures and after spallation irradiation

Serafin Knitel

The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...

EPFL2018

TLD calibration for neutron fluence measurements at JET fusion facility

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia, Alessandro Pau, Pierre-Thomas Paul Brun, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Mikhail Maslov, Nicola Vianello, Miguel Fernández Ruiz, Federico Nespoli, Antonio José Pereira de Figueiredo, Liang Yao, Yao Zhou, David Pfefferlé, Dalziel Joseph Wilson, Robin Humphry-Baker, Davide Galassi, José Pedro Rebelo Ferreira Marques, Ana Francisca Leal Silva Soares, Jonathan Marc Philippe Faustin, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Julio Rodriguez, Hamish William Patten, Jonnathan Cesar Hidalgo Acosta, Samuel Lanthaler, , , , , , , ,

Activation Inventories After Exposure To Dd/Dt Neutrons In Safety Analysis Of Nuclear Fusion Installations

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia, Alessandro Pau, Pierre-Thomas Paul Brun, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Mikhail Maslov, Nicola Vianello, Miguel Fernández Ruiz, Federico Nespoli, Antonio José Pereira de Figueiredo, Liang Yao, Yao Zhou, David Pfefferlé, Dalziel Joseph Wilson, Robin Humphry-Baker, Davide Galassi, José Pedro Rebelo Ferreira Marques, Ana Francisca Leal Silva Soares, Jonathan Marc Philippe Faustin, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Julio Rodriguez, Hamish William Patten, Jonnathan Cesar Hidalgo Acosta, , , , , , , , ,

Development of a processing route for carbon allotrope-based TiC porous nanocomposites

Paul Bowen

Ti-foils are currently used as a spallation target material to produce radioisotopes for physics research at the ISOLDE facility at CERN. However, radioisotope production rates often decrease over time due to material degradation from high operation temper ...

2017

A combined radial collimator and cooled beryllium filter for neutron scattering

Henrik Moodysson Rønnow, Felix Groitl

A flexible, combined, radial collimator and beryllium (Be) filter have been designed and manufactured at the Paul Scherrer Institut (PSI), Switzerland. The Be is integrated in the radial collimator by placing thin Be slices between the collimator lamellas. ...

Elsevier2016

CAMEA ESS - The continuous angle multi-energy analysis indirect geometry spectrometer for the European Spallation Source

Henrik Moodysson Rønnow, Paul Gregory Freeman

The CAMEA ESS neutron spectrometer is designed to achieve a high detection efficiency in the horizontal scattering plane, and to maximize the use of the long pulse European Spallation Source. It is an indirect geometry time-of-flight spectrometer that uses ...

E D P Sciences2015