Publications associées à Microbalance à quartz

Ultrahigh-quality-factor micro- and nanomechanical resonators using dissipation dilution

Tobias Kippenberg, Alberto Beccari, Nils Johan Engelsen

Mechanical resonators are widely used in sensors, transducers and optomechanical systems, where mechanical dissipation sets the ultimate limit to performance. Over the past 15 years, the quality factors in strained mechanical resonators have increased by f ...

Nature Portfolio2024

Methods for Calibrating the Electrochemical Quartz Crystal Microbalance: Frequency to Mass and Compensation for Viscous Load

Stefano Mischler, Anna Neus Igual Muñoz

The main output from an Electrochemical Quartz Crystal Microbalance is a frequency shift. This note describes how to separate the mass- and viscous load contributions to this shift by a calibration procedure. The mass calibration is made by electroplating ...

MDPI2023

Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

The development of fully solution-processed, biodegradable piezoelectrics is a critical step in the development of green electronics towards the worldwide reduction of harmful electronic waste. However, recent printing processes for piezoelectrics are hind ...

2023

A 5G n77 Filter Using Shear Bulk Mode Resonator With Crystalline X-cut Lithium Niobate Films

Luis Guillermo Villanueva Torrijo, Florian Fernand Hartmann

This paper presents the use of a shear bulk acoustic mode resonator made of a membrane of X-cut lithium niobate (LiNbO3) for ultra-wide band filter applications. Aluminum interdigitated (IDT) electrodes are deposited on top of the LiNbO3 thin film as well ...

IEEE2023

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Danick Briand, Luis Guillermo Villanueva Torrijo, Morgan Mc Kay Monroe

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

Zenodo2023

Cholesterol-Containing Liposomes Decorated With Au Nanoparticles as Minimal Tunable Fusion Machinery

Francesco Stellacci, Paulo Henrique Jacob Silva, Ester Canepa, Giulia Rossi

Membrane fusion is essential for the basal functionality of eukaryotic cells. In physiological conditions, fusion events are regulated by a wide range of specialized proteins, operating with finely tuned local lipid composition and ionic environment. Fusog ...

WILEY-V C H VERLAG GMBH2023

Programmable Silicon Nitride Photonic Integrated Circuits

Tobias Kippenberg, Rui Ning Wang, Anat Siddharth, Viacheslav Snigirev, Andrea Bancora, Andrey Voloshin, Vladimir Shadymov

Silicon Nitride (Si3N4) photonic integrated circuits (PICs) have emerged as core technology in a variety of applications ranging from LIDAR to quantum control and computing. However, the need for high-speed, low-voltage tuning and modulation has been a lon ...

IEEE2023

Optimization of Edge Profile for Improved Anti-Resonance Quality Factor in Lithium Niobate SH0 Resonators

Luis Guillermo Villanueva Torrijo, Silvan Stettler

Thin-film lithium niobate (LNO) has been identified as a promising material platform for enabling high electromechanical coupling and low-loss piezoelectric resonators for filtering applications. In this work, the design and fabrication of fundamental shea ...

IEEE2022

Nonlinear electro-mechanical coupling and thermally stimulated currents in relaxor ferroelectrics

Lukas Riemer

In this work, the emergence of polarization and electro-mechanical coupling in Pb(Mg1/3Nb2/3)O3 and Pb(Mg1/3Nb2/3)O3 â PbTiO3 was investigated by means of thermally stimulated current, and nonlinear dielectric and electro-mechanical measurements. The pre ...

EPFL2022

Stretchable High Response Piezoelectric Elastomers Based on Polable Polynorbornene Fillers in a Polydimethylsiloxane Matrix

Frank Nüesch, Francis Owusu

To advance the field of piezoelectrics, it is desirable to find materials that combine high piezoelectricity with high elasticity. Applications such as self-sensors, stretchable electronics, soft robots, and energy harvesting would benefit tremendously. Ho ...

WILEY-V C H VERLAG GMBH2022

Development of Thin Film Lithium Niobate Shear Bulk Acoustic Wave Resonators

Soumya Yandrapalli

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022

Facet Engineering for Stable, Efficient Perovskite Solar Cells

Michael Graetzel

Facet engineering is an important strategy for tuning the physical, chemical, and electronic properties of a crystal surface, and it also provides an effective route to improve the device performance in many fields. Complex crystal structures with rough mo ...

AMER CHEMICAL SOC2022

Microfluidic study in a meter-long reactive path reveals how the medium’s structural heterogeneity shapes MICP-induced biocementation

Lyesse Laloui, Dimitrios Terzis, Ariadni Elmaloglou

Microbially induced calcium carbonate (CaCO3) precipitation (MICP) is one of the major sustainable alternatives to the artificial cementation of granular media. MICP consists of injecting the soil with bacterial- and calcium-rich solutions sequentially to ...

Nature Research2022

A formula for the admittance of laterally excited bulk wave resonators (XBARs)

Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli, Victor Plessky

The recently invented laterally excited bulk wave resonators (XBARs) demonstrate outstanding parameters suitable for the design of low loss filters for the fifth generation of mobile phones. The operation of XBARs can be interpreted as an excitation of ant ...

WILEY2021

Adsorption of organic matter on titanium surfaces with nano- and micro-scale roughness studied with the electrochemical quartz crystal microbalance dissipation technique

Stefano Mischler, Anna Neus Igual Muñoz

Adsorption of calf serum organic matter from a phosphate-buffered solution was studied using the electrochemical quartz crystal microbalance with additional dissipation measurements. Two types of crystal surfaces were used: one rough with micrometer-range ...

AIP Publishing2021

Quantum coherent microwave-optical transduction using high-overtone bulk acoustic resonances

Tobias Kippenberg

A device capable of converting single quanta of the microwave field to the optical domain is an outstanding endeavor in the context of quantum interconnects between distant superconducting qubits, but likewise can have applications in other fields, such as ...

AMER PHYSICAL SOC2021

X-Band Aom On Chip

Tobias Kippenberg, Anat Siddharth, Junqiu Liu

Silicon Nitride integrated photonic circuits have drawn much attention owing to its ultra-low loss and large Kerr nonlinearity. However, the lack of Pockels effect makes it difficult to be modulated clectro-optically, which posts a major challenge for the ...

IEEE2021

Development of Lamb wave resonators in thin film X-cut lithium niobate

Muhammad Faizan

Microelectromechanical systems (MEMS) is among the most revolutionary technologies of 21st century, with the applications ranging from industrial systems to consumer electronics. Using MEMS in battery-powered wireless devices has long been seen as the evol ...

EPFL2021

Thermomechanical properties of honeycomb lattices from internal-coordinates potentials: the case of graphene and hexagonal boron nitride

Nicola Marzari, Francesco Libbi

Lattice dynamics in low-dimensional materials and, in particular, the quadratic behaviour of the flexural acoustic modes play a fundamental role in their thermomechanical properties. A first-principles evaluation of these can be very demanding, and can be ...

IOP PUBLISHING LTD2021

Ultrafast photo-induced phonon hardening due to Pauli blocking in MAPbI(3) single-crystal and polycrystalline perovskites

Samuel Poncé, Feliciano Giustino

Metal-halide perovskite semiconductors have attracted intense interest over the past decade, particularly for applications in photovoltaics. Low-energy optical phonons combined with significant crystal anharmonicity play an important role in charge-carrier ...

IOP PUBLISHING LTD2021