Publications associées à Four à arc électrique

Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion

Christian Leinenbach, Elyas Ghafoori, Irene Ferretto, Mahbod Golrang, Mahshid Memarian

This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...

Wiley-V C H Verlag Gmbh2024

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

Improved Waste Heat Management and Energy Integration in an Aluminum Annealing Continuous Furnace Using a Machine Learning Approach

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier, Mohammad Andayesh, Manuele Gatti

Annealing furnaces are critical for achieving the desired material properties in the production of high-quality aluminum products. In addition, energy efficiency has become more and more important in industrial processes due to increasing decarbonization r ...

2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Annapaola Parrilli, Caroline Hain, Alberto Ortona, Manoj Kondibhau Naikade

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

The role of Zn in C-S-H atomic structure, nucleation and growth

Anna Morales Melgares

The most promising solution towards cementitious materials with a lower carbon footprint is the partial substitution of the clinker by supplementary cementitious materials (SCMs) such as fly ash, blast furnace slag, limestone and calcined clays. The produc ...

EPFL2023

A systemic study for enhanced waste heat recovery and renewable energy integration towards decarbonizing the aluminium industry

François Maréchal, Daniel Alexander Florez Orrego, Réginald Germanier

The aluminium remelting industry relies on natural gas to transform recycled aluminium into aluminium feedstock, entailing significant atmospheric emissions. Hydric resources are also affected as they are used as sinks of waste heat from the casting proces ...

2023

Report of RILEM TC 267-TRM phase 3: validation of the R-3 reactivity test across a wide range of materials

Karen Scrivener, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, François Henri Avet, Mohsen Ben Haha, Xuerun Li, Pawel Tadeusz Durdzinski, Diana Londoño Zuluaga

RILEM TC 267 TRM- "Tests for Reactivity of Supplementary Cementitious Materials" recommends the Rapid Reliable Relevant (R-3) test as a method for determining the chemical reactivity of supplementary cementitious materials (SCMs) in Portland cement blends. ...

SPRINGER2022

Nanoscale modelling of ionic transport in the porous C-S-H network

Khalil Ferjaoui

To reduce the CO2 footprint of construction materials, concrete producers blend their cement with Supplementary Cementitious Materials (SCMs). SCMs such as fly ash or blast furnace slag are mostly the byproducts of other industries. And while SCMs are chos ...

EPFL2022

The effect of alkali hydroxides and equilibration time on Al uptake by calcium silicate hydrates (C-S-H)

Sonya Barzgar

Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...

EPFL2021

Hybrid soft-rigid electrical interconnection system

Stéphanie Lacour, Giuseppe Schiavone, Florian Dylan Fallegger

It is disclosed an electrical interconnection system comprising: i) an interconnection board comprising an intrinsically non elastic substrate, said substrate having a first face and an opposed second face, and at least one conductive track on and/or withi ...

2021

Processing and micro-mechanical characterization of multi-component transition MC carbides in iron

Andreas Mortensen, Goran Zagar, Léa Deillon, Marta Fornabaio, Lionel Michelet

We prepare multi-component transition monocarbides of chosen composition by arc-melting together a pre-alloy of the transition metals and cast iron. Based on the elements Ti, Ta, V, Nb and W, 51 different binary, ternary and quaternary compositions are pro ...

2021

Multi-physical characterization of cellular ceramics for high-temperature applications

Ehsan Rezaei

The use of cellular ceramics in enhancing the performance of a high-temperature latent heat thermal energy storage unit was investigated. A detailed design methodology is presented, which consists of a combined analytical-numerical analysis followed by a m ...

EPFL2020

Recommendations for Improved Welding Procedures for Thick Steel Plates Through Thermo-Mechanical Analysis

Dimitrios Lignos

Welding of steel plates is accompanied by residual stresses that increase as the constraint provided by the welded components becomes greater. Consequently, crack initiation has been reported after welding thick plates due to the high residual stresses dev ...

2019

High-power gyrotrons for electron cyclotron heating and current drive

Minh Quang Tran

In many tokamak and stellarator experiments around the globe that arc investigating energy production via controlled thermonuclear fusion, electron cyclotron heating and current drive (ECH&CD) are used for plasma start-up, heating, non-inductive current dr ...

IOP Publishing Ltd2019

Modeling and experimentation of conductive and radiative transfer through heterogeneous insulators in high-flux environments

Jérémy Raphaël Mora-Monteros

Heterogeneous materials are used in a wide range of applications involving high heat flux environments such as concentrated solar reactors, high-temperature furnaces, or thermal protection systems of space vehicles. The thermal response of heterogeneous ma ...

EPFL2019

Reactivity tests for supplementary cementitious materials: RILEM TC 267-TRM phase 1

Karen Scrivener, Ruben Anton Snellings, Mohsen Ben Haha, Xuerun Li, Mathieu Antoni, Shashank Bishnoi, Anuj Parashar, Yuvaraj Dhandapani

A primary aim of RILEM TC 267-TRM: Tests for Reactivity of Supplementary Cementitious Materials (SCMs) is to compare and evaluate the performance of conventional and novel SCM reactivity test methods across a wide range of SCMs. To this purpose, a round ro ...

SPRINGER2018

Mechanical properties of MC multimetallic carbides in steel

Lionel Michelet

Carbides constitute a class of materials used for many applications, where excellent mechanical properties, such as stiffness, hardness and fracture toughness, are required. The machining industry is a typical example where carbide are crucial materials. W ...

EPFL2018

Preparation for commissioning of materials detritiation facility at Culham Science Centre

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia, Alessandro Pau, Pierre-Thomas Paul Brun, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Mikhail Maslov, Nicola Vianello, Miguel Fernández Ruiz, Federico Nespoli, Antonio José Pereira de Figueiredo, Liang Yao, Yao Zhou, David Pfefferlé, Dalziel Joseph Wilson, Robin Humphry-Baker, Davide Galassi, José Pedro Rebelo Ferreira Marques, Ana Francisca Leal Silva Soares, Jonathan Marc Philippe Faustin, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Julio Rodriguez, Hamish William Patten, Jonnathan Cesar Hidalgo Acosta, , , , , , , , ,

The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled Aluminium alloy

Cyril Cayron, Roland Logé, Ke Huang

Pronounced acceleration of recrystallization in cold worked metals is generally observed during annealing with additional high density electric current pulses. In this work, continuous alternating current of low density was applied to heat cold-rolled samp ...

Elsevier2017

Early-stage oxidation behavior at high temperatures of SiSiC cellular architectures in a porous burner

Sophia Haussener, Ehsan Rezaei, Alberto Ortona

Early stage oxidation behavior of SiSiC cellular lattices with different cell types was studied at 1400 degrees C in two different environments: a porous burner and an electric furnace with stagnant air. Oxidation and silicon alloy bead formation were obse ...

Elsevier2016