Publications associées à Revenu (métallurgie)

Composition and Element Distribution Mapping of γ′ and γ" Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry

The main strengthening mechanism for Inconel 718 (IN718), a Ni-based superalloy, is precipitation hardening by gamma ' and gamma '' particles. It is thus essential, for good alloy performance, that precipitates with the desired chemical composition have ad ...

MDPI2024

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Roland Logé

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Modeling and characterization of the nucleation and growth of carbon nanostructures in physical synthesis

Kevin Rossi

Carbon nanostructures formed through physical synthesis come in a variety of sizes and shapes. With the end goal of rationalizing synthetic pathways of carbon nanostructures as a function of tunable parameters in the synthesis, we investigate how the initi ...

ELSEVIER2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Imaging Radial Distribution Functions of Complex Particles by Relayed Dynamic Nuclear Polarization

David Lyndon Emsley, Arthur César Pinon, Pierrick Berruyer

The physical properties of many modern multi-component materials are determined by their internal microstructure. Tools capable of characterizing complex nanoscale architectures in composite materials are, therefore, essential to design materials with targ ...

2023

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

Non-Linear Behaviors In The Dynamics Of Complex Systems Through A Multifractal Hydrodynamic Model

Maria-Alexandra Paun

Some non-linear behaviors in the dynamics of complex systems using the Scale Relativity Theory in the form of Multifractal Hydrodynamic Model are analyzed. By assimilating any complex system to a mathematical multifractal-type object, it is shown that the ...

UNIV POLITEHNICA BUCHAREST, SCI BULL2022

Optical fibre based quench detection in HTS applications using machine learning classifiers

Nicolo' Riva, Arooj Akbar, Bertrand Dutoit, Bertrand Dutoit

A Mach-Zehnder Interferometer (MZI) based optical fibre sensing technique, developed and patented by EPFL, is an efficient and economical way to detect hotspots in High Temperature Superconductor (HTS) applications. Due to the MZI sensitivity being a compo ...

Elsevier2022

Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength

Roland Logé, Cyril Cayron, Baptiste Thomas Jean Rouxel

Cu-Be alloys provide excellent electrical and mechanical properties, but present serious health hazards during manufacturing. Among alternative alloys, the Cu-Ti system has the highest yield strength; however, Ti cannot be easily solutionized at concentrat ...

ELSEVIER SCI LTD2022

Theory-guided design of high-strength, high-melting point, ductile, low-density, single-phase BCC high entropy alloys

William Curtin, Christian Leinenbach, Carolina Baruffi, You Rao

The search for new high-temperature alloys that can enable higher-efficiency/lower-emissions power generation has accelerated with the discovery of body-centered cubic (bcc) refractory High Entropy Alloys (HEAs). These many-component, non-dilute alloys in ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Development of High-Strength Aluminum Alloys for Additive Manufacturing

Marvin Lennard Schuster

Metal additive manufacturing (AM) offers the possibility to rapidly produce complex geometries that are not achievable with conventional manufacturing methods. The two most common technologies, Laser Powder Bed Fusion (LPBF) and Direct Metal Deposition (DM ...

EPFL2022

Skyrmion Control and Phase Transitions in Cu2OSeO3

Thomas Schönenberger

Magnetic skyrmions are nanometric and non-trivial spin textures with non-zero topological charge. Their robustness against perturbations and the possibility to control them using external stimuli make them ideal candidates for future spintronic application ...

EPFL2022

Experimental investigation of dowel action using advanced measurement techniques

Aurelio Muttoni, Marko Pejatovic

Existing shear-cracked structures need to be reliably verified in order to avoid redundant interventions. Code provisions often raise shear safety and/or fatigue life concerns of the reinforcement subjected to stress concentrations due to cyclic dowel acti ...

2022

Giant hardening response in AlMgZn(Cu) alloys

William Curtin, Daniel John Gilles Marchand

This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...

PERGAMON-ELSEVIER SCIENCE LTD2021

The effect of stress triaxiality on the phase transformation in transformation induced plasticity steels: Experimental investigation and modelling the transformation kinetics

Helena Van Swygenhoven, Nicola Casati, Efthymios Polatidis

In situ multiaxial loading during neutron diffraction tests were undertaken on a low-alloyed Quenched and Partitioning (Q&P) Transformation Induced Plasticity (TRIP) Bainitic Ferrite (TBF) steel with dispersed austenite particles. The effect of stress tria ...

2021

Upgrade and Commissioning of the SULTAN Facility to Host Quench Experiments on HTS High Current Conductors

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Ortensia Dicuonzo

High Temperature Superconductors (HTS) are promising materials for future fusion magnets. One of HTS conductors' main issues is the quench protection: the quench develops much slower than in LTS, delaying the quench detection by voltage monitoring and caus ...

IEEE Institute of Electrical and Electronics Engineers2021

Processing and micro-mechanical characterization of multi-component transition MC carbides in iron

Andreas Mortensen, Goran Zagar, Léa Deillon, Marta Fornabaio, Lionel Michelet

We prepare multi-component transition monocarbides of chosen composition by arc-melting together a pre-alloy of the transition metals and cast iron. Based on the elements Ti, Ta, V, Nb and W, 51 different binary, ternary and quaternary compositions are pro ...

2021

Design using randomness: a new dimension for metallurgy

William Curtin

High entropy alloys add a new dimension, atomic-scale randomness and the associated scale-dependent composition fluctuations, to the traditional metallurgical axes of time-temperature-composition-microstructure. Alloy performance is controlled by the energ ...

2020

What EBSD and TKD Tell Us about the Crystallography of the Martensitic B2-B19′ Transformation in NiTi Shape Memory Alloys

Cyril Cayron

The complex and intricate microstructure of B19′ martensite in shape memory nickel titanium alloys is generally explained with the Phenomenological Theory of Martensitic Crystallography (PTMC). Over the last decade, we have developed an alternative approac ...

2020

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

Roland Logé, Cyril Cayron, Bo Xiao

G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...

PERGAMON-ELSEVIER SCIENCE LTD2020