Publications associées à Compresseur axial

An Integrated Approach to Designing Robust Turbocompressors on Gas Bearings Through Surrogate Modeling and Constrained Multi-Objective Optimization

Jürg Alexander Schiffmann, Soheyl Massoudi, Cyril Picard

Designing turbocompressors is a complex and challenging task, as it involves balancing conflicting objectives such as efficiency, stability, and robustness against manufacturing deviations. This paper proposes an integrated design methodology for turbocomp ...

ASME Amer Soc Mechanical Engineers2023

The influence of splitter blades and meridional profiles on the performance of small-scale turbopumps for ORC applications; analysis, neural network modeling and optimization

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

This work presents the influence of splitters on the performance of small-scale turbopumps for organic Rankine cycle applications numerically. Different design parameters, such as impeller diameter at the outlet, number of blades, blade angle at the traili ...

2023

Design, computational and experimental investigation of a small-scale turbopump for organic Rankine cycle systems

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The hydraulic design, computational analysis, and experimental investigations of a high-speed small-scale turbopump for mobile waste heat recovery applications based on organic Rankine cycle systems are presented in this paper. Such applications demand hig ...

Elsevier2023

Robust design using multiobjective optimisation and artificial neural networks with application to a heat pump radial compressor

Jürg Alexander Schiffmann, Soheyl Massoudi, Cyril Picard

Although robustness is an important consideration to guarantee the performance of designs under deviation, systems are often engineered by evaluating their performance exclusively at nominal conditions. Robustness is sometimes evaluated a posteriori throug ...

2022

Experimental assessment of an active (acoustic) liner prototype in an acoustic flow duct facility

Hervé Lissek, Maxime Volery, Gaël Matten

In this paper, experimental results of broadband noise reduction in an acoustic flow duct are presented. An active liner composed of an array of electroacoustic absorbers is used. The control law is based on the pressure-based, current driven digital archi ...

SPIE2021

A new Euler-Lagrangian cavitation model for tip-vortex cavitation with the effect of non-condensable gas

Mohamed Farhat, Huaiyu Cheng

Numerical simulation of tip vortex cavitation (TVC) remains a challenging task in a variety of applica-tions, such as axial turbines and pumps as well as marine propellers. Although it is well known that TVC is highly sensitive to gas content, be it dissol ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Real-time optimization of load sharing for gas compressors in the presence of uncertainty

Dominique Bonvin, Timm Faulwasser, Alejandro Gabriel Marchetti, Predrag Milosavljevic

This paper investigates the problem of load-sharing optimization of gas compressors in the presence of uncertainty. The objective is to operate a set of compressor units in an energy-efficient way, while at the same time meeting a varying load demand. The ...

ELSEVIER SCI LTD2020

The Role of Reynolds Number Effect and Tip Leakage in Compressor Geometry Scaling at Low Turbulent Reynolds Numbers

Jürg Alexander Schiffmann, Markus Diehl, Christoph Schreiber

In compressor design, a convenient way to save time is to scale an existing geometry to required specifications, rather than developing a new design. The approach works well when scaling compressors of similar size at high Reynolds numbers but becomes more ...

2020

Scale limitations of gas bearing supported turbocompressors for vapor compression cycles

Jürg Alexander Schiffmann

An analysis of single-stage centrifugal compressors supported on dynamic, gas lubricated bearings for driving vapor compression cycles suggests that the maximum feasible compressor power is limited, primarily by the bearing load capacity, in the range from ...

2020

Nonlinear evolution of the centrifugal instability using a semilinear model

François Gallaire, Eunok Yim

We study the nonlinear evolution of the axisymmetric centrifugal instability developing on a columnar anticyclone with a Gaussian angular velocity using a semilinear approach. The model consists of two coupled equations: one for the linear evolution of the ...

Cambridge University Press2020

Theoretical and Experimental Investigation of a 34 Watt Radial-Inflow Steam Turbine with Partial-Admission

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

A micro steam turbine with a tip diameter of 15mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kgh-1 and 2, respectively, the turbine yields a power of 34W and a total-to-static isent ...

2021

Theoretical and Experimental Investigation of a 34 Watt Radial-Inflow Steam Turbine with Partial-Admission

Jan Van Herle, Jürg Alexander Schiffmann, Patrick Hubert Wagner

A micro steam turbine with a tip diameter of 15 mm was designed and experimentally characterized. At the nominal mass flow rate and total-to-total pressure ratio of 2.3 kg/h and 2, respectively, the turbine yields a power of 34 W and a total-to-static isen ...

2021

DeepFocus: a Few-shot Microscope Slide Auto-Focus using a Sample Invariant CNN-based Sharpness Function

Michael Stefan Daniel Liebling, Adrian Shajkofci

Autofocus (AF) methods are extensively used in biomicroscopy, for example to acquire timelapses, where the imaged objects tend to drift out of focus. AF algorithms determine an optimal distance by which to move the sample back into the focal plane. Current ...

2020

Multi-objective optimization and exergoeconomic analysis of a continuous solar-driven system with PCM for power, cooling and freshwater production

Hossein Pourrahmani

In this article, three different modes of a novel integrated system would be evaluated by the application of high temperature Thermal Energy Storage (TES) to produce electricity, cooling, and freshwater. Freshwater is produced using the reverse osmosis (RO ...

Elsevier2020

Mitigation of tip leakage induced phenomena in a low Reynolds number centrifugal compressor via blade loading distribution

Markus Diehl

Reduced-scale refrigeration compressors supported on gas-lubricated bearings have been identified as a key technology for domestic heat pump applications, in order to improve both the system efficiency and the reliability. Unfortunately, reduced-scale mach ...

EPFL2019

Impact of large tip clearance ratios on the performance of a centrifugal compressor

Jürg Alexander Schiffmann, Markus Diehl

Ultra-compact and fast spinning turbomachinery is a key technology to increase performance of domestic heating applications and to address decentralization of power and heat as a consequence of the rise of renewable energy sources. Recently, a heat pump us ...

2019

Variable speed operation of centrifugal pumps running as turbines. Experimental investigation

François Avellan, João Nuno Gomes Borga Delgado

Pumps running as turbines are pointed out as a cost-effective solution for energy recovery in pressurised water supply systems. However, these hydraulic machines feature low efﬁciency under variable discharge operation due to the lack of an inlet ﬂow contr ...

Pergamon-Elsevier Science Ltd2019

Metal hydride compressor control device and method

Andreas Züttel, Noris André Gallandat

The present relates to a Metal hydride compressor control method for generating a variable output pressure P_desired_outPut, comprising a first step of inflowing gaseous hydrogen into a metal hydride compartment at a constant temperature and then stopping ...

2019

Unsteady Flow Numerical Simulations on Internal Energy Dissipation for a Low-Head Centrifugal Pump at Part-Load Operating Conditions

François Avellan, Xiaoran Zhao

Dredge pumps are usually operated at part-load conditions, in which the low-solidity centrifugal impeller could experience large internal energy dissipation, related to flow separation and vortices. In this study, SST k- and SAS-SST turbulence models were ...

2019

Unraveling radial dependency effects in fiber thermal drawing

François Gallaire, Fabien Sorin, Alexis Gérald Page, Mathias Simon Daniel Bechert

Fiber-based devices with advanced functionalities are emerging as promising solutions for various applications in flexible electronics and bioengineering. Multimaterial thermal drawing, in particular, has attracted strong interest for its ability to genera ...

2019