Publications associées à Fusion du cœur d'un réacteur nucléaire

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

EPFL2024

Intra-pin Reaction Rate Measurements in the CROCUS Experimental Reactor

Andreas Pautz, Vincent Pierre Lamirand, Mathieu Hursin, Oskari Ville Pakari, Thomas Jean-François Ligonnet, Tom Mager

In response to the need for validating high-fidelity deterministic neutronics solvers capable of providing pin-resolved neutron flux distributions, intra-pin reaction rates measurements were performed in the CROCUS experimental reactor. A specially designe ...

2024

Gamma-ray Spectroscopy in Low-Power Nuclear Research Reactors

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Gamma-ray spectroscopy is an effective technique for radioactive material characterization, routine inventory verification, nuclear safeguards, health physics, and source search scenarios. Gamma-ray spectrometers typically cannot be operated in the immedia ...

MDPI2024

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Atomic level insight into irradiation effects in nuclear fuel materials

Shaileyee Bhattacharya

Microstructural evolution during in-pile irradiation, radiation damage effects and fission products behavior in UO2 nuclear fuel are key issues in understanding and for the modeling of the performance as well as safety characteristics of nuclear fuels in t ...

EPFL2024

Enhancing higher education through hybrid and flipped learning: Experiences from the GRE@T-PIONEeR project

Mathieu Hursin, Yi Zhang

GRE@T-PIONEeR is a Horizon 2020 project coordinated by Chalmers University of Technology, running over the period 2020-2024. 18 university teachers from 8 different universities located in 6 different countries gathered forces to develop and offer advanced ...

Elsevier Science Sa2024

Extension of the OFFBEAT fuel performance code to finite strains and validation against LOCA experiments

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro, Edoardo Luciano Brunetto

The mechanical analysis of nuclear fuel behavior under base-irradiation conditions has traditionally been performed adopting the small-strain approximation. However, many cases of interest for fuel behavior involve the occurrence of large rod deformations ...

ELSEVIER SCIENCE SA2023

Design of an Instrumented Fuel Rod for Intra-pin Neutron Flux Measurements in the CROCUS Experimental Reactor

Andreas Pautz, Vincent Pierre Lamirand, Mathieu Hursin, Thomas Jean-François Ligonnet, Won Dong Shin, Tom Mager

In response to the need for validating high-fidelity deterministic neutronics solvers capable of pin-resolved neutron flux distributions, an instrumented fuel rod was designed for the experimental reactor CROCUS, operated by EPFL’s Laboratory for Reactor P ...

2023

Extension, validation, and optimization of Serpent/DYN3D/ATHLET code system for SFR applications

Vincenzo Anthony Di Nora

The sequence of codes Serpent/DYN3D has been developed by the Helmholtz-Zentrum Dresden-Rossendorf and successfully applied to core static and transient analyses of sodium-cooled fast reactors (SFRs). The successful application of the sequence to SFRs was ...

EPFL2023

Advanced methodologies for modeling and assessment of SFR safety functions

Janos Bodi

The present doctoral work was performed to contribute to the conceptual design development and safety assessment of a Generation IV Sodium Fast Reactor (SFR) in the frame of the European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ES ...

EPFL2022

Towards coupling conventional with high-fidelity fuel behavior analysis tools

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro, Edoardo Luciano Brunetto

Multi-dimensional fuel performance codes have the potential to enhance the understanding of complex phenomena affecting fuel integrity, but their application is often limited by the high computational cost. Recognizing that many multi-dimensional aspects s ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

Investigation of the density shoulder formation by using self-consistent simulations of plasma turbulence and neutral kinetic dynamics

Paolo Ricci, Davide Mancini, Nicola Vianello, Maurizio Giacomin

Simulations of plasma turbulence in a lower single-null magnetic configurations are presented. The plasma dynamics is modelled by the drift-reduced two-fluid Braginskii equations that are coupled with a kinetic model for a single neutral species that consi ...

IOP Publishing Ltd2021

Optimisation of used nuclear fuel canister loading using a neural network and genetic algorithm

Andreas Pautz, Hakim Ferroukhi, Dimitri Rochman, Alexander Vasiliev

This paper presents an approach for the optimisation of geological disposal canister loadings, combining high resolution simulations of used nuclear fuel characteristics with an articial neural network and a genetic algorithm. The used nuclear fuels (produ ...

SPRINGER LONDON LTD2021

Investigation on the effect of eccentricity for fuel disc irradiation tests

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro

A varying degree of eccentricity always exists in the initial configuration of a nuclear fuel rod. Its impact on traditional LWR fuel is limited as the radial gap closes relatively early during irradiation. However, the effect of misalignment is expected t ...

2021

A Hybrid Approach to Neutron Transport with Thermal-hydraulic Feedback for Reactor Transient Analysis

Alexander Aures

Understanding the time-dependent behaviour of a nuclear reactor following an intended or unintended change of the reactor conditions is of crucial importance to the safe operation of nuclear reactors. Safety evaluations of nuclear reactors involve the anal ...

EPFL2021

Towards the Validation of Noise Experiments in the CROCUS Reactor Using the TRIPOLI-4 Monte Carlo Code in Analog Mode

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Intrinsic neutron noise experiments offer a non-invasive manner to measure the prompt decay constant or reactivity of fissile systems. Using the fluctuations in the density of fission chains, one can infer the kinetics parameters via correlation analysis s ...

2021

Analysis of the first COLIBRI fuel rods oscillation campaign in the CROCUS reactor for the European project CORTEX

Andreas Pautz, Vincent Pierre Lamirand, Mathieu Hursin, Carlo Fiorina, Oskari Ville Pakari, Pavel Frajtag, Axel Guy Marie Laureau, Adolfo Rais, Daniel Godat

The Horizon2020 European project CORTEX aims at developing an innovative core monitoring technique that allows detecting anomalies in nuclear reactors, such as excessive vibrations of core internals, flow blockage, or coolant inlet perturbations. The techn ...

2021

A design proposal for the European DEMO superconducting bus bars and current leads

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche, Roberto Guarino

The integration of the feeder system in a tokamak involves complex engineering, manufacturing and logistics issues. Therefore, within the pre-conceptual design activities of the European DEMO fusion reactor, it is important to provide a preliminary sizing ...

2021

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

Roland Logé, Nicola Colonna, Raffaele Esposito

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontall ...

2021