Publications associées à Photodégradation d'un polymère

Acids from fruits generate photoactive Fe-complexes, enhancing solar disinfection of water (SODIS): A systematic study of the novel " fruto-Fenton " process, effective over a wide pH range (4-9)

César Pulgarin, Aline Laetitia Schaub, Stefanos Giannakis, Giulio Farinelli, Mona Kohantorabi

This study aimed to enhance solar disinfection (SODIS) by the photo-Fenton process, operated at natural pH, through the re-utilization of fruit wastes. For this purpose, pure organic acids present in fruits and alimentary wastes were tested and compared wi ...

Pergamon-Elsevier Science Ltd2024

Simultaneous local sensing of two chemical properties with dual soft probe scanning electrochemical microscopy

Hubert Girault, Andreas Stephan Lesch, Gregorio Bonazza

A new method for the rapid and economic fabrication of dual soft microelectrodes for Soft-Probe-Scanning electrochemical microscopy (Soft-Probe-SECM) and their use for the simultaneous local detection of locally generated species is presented. The process ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Architecturally Diverse Polymer Brushes Prepared via Surface-Initiated Atom Transfer Radical Polymerization

Sabrina Sant

Polymer brushes, which are polymers anchored to a solid substrate by one chainend, have the ability to modify the properties of an underlying substrate, offering intriguing features such as enhanced lubrication, reduced friction, colloidal stability, and a ...

EPFL2023

Unidirectional penetration approach for characterizing sulfate attack mechanisms on cement mortars and pastes

Karen Scrivener, Qiao Wang, William Wilson

Degradation of cementitious materials by sulfate ions is commonly classified into chemical and physical sulfate attack. So-called "physical" attack dominates in many field situations, but laboratory testing focuses on "chemical" attack under full-immersion ...

Pergamon-Elsevier Science Ltd2023

Corrosion testing of solar cells: Wear-out degradation behavior

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Luca Gnocchi, Andrew Wayne Fairbrother

Corrosion is one of the main end-of-life degradation and failure modes in photovoltaic (PV) modules. However, it is a gradual process and can take many years to become a major risk factor because of the slow accumulation of water and acetic acid (from enca ...

ELSEVIER2022

Controlling Light in Scattering Materials for Volumetric Additive Manufacturing

Christophe Moser, Paul Delrot, Jorge Andres Madrid Wolff, Damien Claude-Marie Loterie, Antoine Vincent Boniface

3D printing has revolutionized the manufacturing of volumetric components and structures in many areas. Several fully volumetric light-based techniques have been recently developed thanks to the advent of photocurable resins, promising to reach unprecedent ...

WILEY2022

Effective removal of the rotifer Brachionus calyciflorus from a Chlorella vulgaris microalgal culture by homogeneous solar photo-Fenton at neutral pH

Christian Ludwig, Horst Pick, Stefanos Giannakis, Adrian Pulgarin, Jiahua Chen, Dominik Refardt, Jérémie Decker

In this study, a citrate-modified photo-Fenton process was successfully applied to decontaminate a Chlorella vulgaris microalgae culture spiked with the rotifer Brachionus calyciflorus (5 individuals mL−1). The applied treatment (1 mg L−1 Fe2+, 20 mg L−1 H ...

2022

Insights into the Horizontal and Vertical Profiles of Microplastics in a River Emptying into the Sea Affected by Intensive Anthropogenic Activities in Northern China

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

Studies focused only on surface water may underestimate microplastic abundance in aquatic environments. This was the first survey to investigate the vertical (surface, intermediate, and bottom waters) distribution and composition of microplastics (MPs) in ...

2021

All-polymeric transient neural probe for prolonged in-vivo electrophysiological recordings

Diego Ghezzi, Laura Ferlauto, Paola Vagni, Adele Fanelli, Elodie Geneviève Zollinger

Transient bioelectronics has grown fast, opening possibilities never thought before. In medicine, transient implantable devices are interesting because they could eliminate the risks related to surgical retrieval and reduce the chronic foreign body reactio ...

2021

EVA for Glass/Glass Solar PV Modules: Effect of encasulant storage conditions and process parameters

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Luca Gnocchi

This work investigates t the effectiveness of glass-glass solar PV module structures used in combination with a EVA as an encapsulant material. The use of EVA in glass-glass structures is in principle discouraged, as a bioproduct of its photo-degradation i ...

IEEE2021

Detrimental vs. beneficial influence of ions during solar (SODIS) and photo-Fenton disinfection of E. coli in water: (Bi)carbonate, chloride, nitrate and nitrite effects

César Pulgarin, Stefanos Giannakis

In this work, we studied the effect of inorganic ions occurring in natural waters on E. coli inactivation by solar and photo-Fenton processes, two crucial methods for drinking water treatment in sunny or developing countries. HCO3-, Cl-, SO42-, NO3-, NO2- ...

2020

Employing bacterial mutations for the elucidation of photo-Fenton disinfection: Focus on the intracellular and extracellular inactivation mechanisms induced by UVA and H2O2

César Pulgarin, Stefanos Giannakis, Ling Feng, Da Wang

The bacterial inactivation mechanisms by solar light and the photo-Fenton process is still a matter of debate. In this study, we bring evidence towards the elucidation of the mechanisms that govern photo-Fenton disinfection at near-neutral pH. With the use ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Microstructured biodegradable fibers for advanced controlled release

Shahrzad Shadman Yazdi

Biodegradable polymers are increasingly at the heart of therapeutic devices. Particularly in the form of thin and elongated fibers, they offer an effective strategy for controlled-release in a variety of biomedical configurations such as sutures, scaffolds ...

EPFL2020

Light-Activated, Bioadhesive, Poly(2-hydroxyethyl methacrylate) Brush Coatings

Dominique Pioletti, Harm-Anton Klok, Peyman Karami, Jian Wang, Nariye Cavusoglu Ataman

Rapid adhesion between tissue and synthetic materials is relevant to accelerate wound healing and to facilitate the integration of implantable medical devices. Most frequently, tissue adhesives are applied as a gel or a liquid formulation. This manuscript ...

American Chemical Society2020

Functional and Responsive Polymers via Controlled Radical Polymerization

Jian Wang

This Thesis is built around 4 topics, which share in common that they all take advantage of the assets of controlled radical polymerization to either (i) prepare well-defined model systems to address fundamental research questions with regard to the sensit ...

EPFL2020

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Horst Pick, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...

2020

Biodegradation and Antimicrobial Properties of Zinc Oxide-Polymer Composite Materials for Urinary Stent Applications

Lorenzo Lucherini

Research advancements in the field of urinary stents have mainly been in the selection of materials and coatings to address commonly faced problems of encrustation and bacterial adhesion. In this study, polylactic acid (PLA) and polypropylene (PP) were eva ...

2020

Visible light plays a significant role during bacterial inactivation by the photo-fenton process, even at sub-critical light intensities

César Pulgarin, Cristina del Socorro Lonfat, Stefanos Giannakis, Rosa Mosteo, David Muzard, Angelica Varon Lopez

The aim of this research is to clarify the contribution of sunlight wavelengths, irradiance and Fe2+/H2O2 during bacterial disinfection by the photo-Fenton process in clear surface waters. We considered different solar spectrum distributions (visible, UVA- ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Photic stress on coral reefs in the Maldives: The Amphistegina bleaching index

Arthur Adams, Aurélie Angéloz, Anaël Lehmann

The Amphistegina Bleaching Index (ABI) was applied to three Maldivian reefs in the Rasdhoo and North Ari Atolls in 2018, during normal sea surface temperature conditions. This dataset was then compared with a 2015, pre-coral bleaching study. The results pr ...

ELSEVIER2020

D35-TiO2 nano-crystalline film as a high performance visible-light photocatalyst towards the degradation of bis-phenol A

Ulf Anders Hagfeldt, Lin Yang, Xue Bai

Dye-sensitized photocatalytic suspension system for wastewater treatment is still limited in practice due to particle aggregation, fast charge carrier recombination, poor stability and recycling issue. In this study, we combine TiO2 nano-crystalline film w ...

ELSEVIER SCIENCE SA2019