Publications associées à Nombre de Biot

Sensitivity Analysis of the Lumped Thermal Model of the EU 170 GHz Gyrotron Magnetron Injection Gun

The ITER Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) system relies on 1 MW 170 GHz Gyrotrons to provide the mm-wave power needed for plasma heating, current drive, and magneto-hydrodynamic control. The design and modeling of the contro ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Evaluation Criterion of Proton Exchange Membrane (ECPEM) fuel cells considering inserted porous media inside the gas flow channel

Jan Van Herle, Hossein Pourrahmani

The focus of this study is to evaluate the effects of porous media inside the gas flow channel of Proton Exchange Membrane Fuel Cells (PEMFC) on four different output parameters of voltage, power density, pressure drop, and Nusselt number (Nu) considering ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Multi-Scale Study of High-Temperature Latent Heat Storage With Metallic Phase Change Materials

Nithin Mallya

Energy storage is a central issue in the green economy with half the global end energy usage being heat. Latent heat thermal energy storage (LHTES) provides an energy dense heat storage solution with a well-defined discharge temperature. Utilizing low-cost ...

EPFL2022

Buoyancy-driven melting and solidification heat transfer analysis in encapsulated phase change materials

Sophia Haussener, Nithin Mallya

Controlled melting and solidification in encapsulated phase change materials (PCMs) is of practical interest, for example, in latent heat storage applications. The choice of PCMs and the dynamic heat transfer characteristics during phase change - affecting ...

2021

Cfd-Based Correlation For Forced Convection Heat Transfer In Circular Ducts Of Internally Heated Molten Salts

Carlo Fiorina

Heat transfer phenomena involving internally heated fluid flows are of particular interest in several industrial applications, in chemical plants as in the nuclear field. This topic is relevant for the development of the Molten Salt Reactors (MSRs) since i ...

AMER SOC MECHANICAL ENGINEERS2018

Coupled Thermo-hydro-Mechanical Effects on Caprock Stability During Carbon Dioxide Injection

Lyesse Laloui, Chao Li

This study presents a numerical investigation of the effects of coupled material properties on the caprock stability. A thermo-hydro-mechanical framework is proposed in order to reproduce the physical processes. The results indicate that for a given geomet ...

2017

Impact of material properties on caprock stability in CO2 geological storage

Lyesse Laloui, Chao Li

In this study, thermo-hydro-mechanical coupled simulations are performed to investigate caprock stability under cooling and pressurization during the injection of carbon dioxide. It is shown that failure potential of caprock increases with a higher value o ...

Elsevier Science Bv2017

Prediction of autogenous shrinkage in fly ash blended cement systems

Zhangli Hu

Autogenous shrinkage is the unrestrained volume change of cementitious materials occurring at con-stant temperature without any change in mass. It occurs as a consequence of self-desiccation (de-crease of internal relative humidity) and increasing capillar ...

EPFL2017

High resolution infrared measurements of single-phase flow of R245fa and R236fa within a compact plate heat exchanger, Part 2: Heat transfer results

John Richard Thome, Raffaele Luca Amalfi

In the second article of the present two-part paper, upward single-phase heat transfer within a compact plate heat exchanger was investigated experimentally. The experimental setup, the data reduction technique and pressure drop results were presented in P ...

Pergamon-Elsevier Science Ltd2016

Interface structure and flux laws in a natural double-diffusive layering

Alfred Johny Wüest, Martin Schmid

The diffusive regime of double-diffusive convection generates staircases consisting of thin high-gradient interfaces sandwiched between convectively mixed layers. Simultaneous microstructure measurements of both temperature and conductivity from the stairc ...

Amer Geophysical Union2013

Numerical investigation of hydrodynamics and heat transfer of elongated bubbles during flow boiling in a microchannel

John Richard Thome, Mirco Magnini

Flow boiling within microchannels has been explored intensively in the last decade due to their capability to remove high heat fluxes from microelectronic devices. However, the contribution of experiments to the understanding of the local features of the f ...

Elsevier2013

Parametric Study for the Cooling of HTS Current Leads Using a Liquid Nitrogen Bath

Rainer Wesche

The analysis of cooling of a binary high T-c superconductor (HTS) 20 kA current lead (CL) operating between 4.5 and 300 K is carried out. We assume that the HTS module is conduction cooled, whereas the cold end of the copper heat exchanger (HEX) is immerse ...

IEEE Institute of Electrical and Electronics Engineers2013

In-plane conduction of polymer composite plates reinforced with architectured networks of Copper fibres

Véronique Michaud

Model composite plates composed of highly conductive slender copper fibres impregnated with a poorly conductive and transparent PMMA matrix were processed with different fibrous architectures, i.e. with various controlled fibre contents and orientations. T ...

Springer Verlag2012

Analytical Heat Transfer Model for Thermal Through-Silicon Vias

Giovanni De Micheli, Hu Xu, Vasileios Pavlidis

Thermal issues are one of the primary challenges in 3-D integrated circuits. Thermal through-silicon vias (TTSVs) are considered an effective means to reduce the temperature of 3-D ICs. The effect of the physical and technological parameters of TTSVs on th ...

2011

Cooling High Heat Flux Micro-Electronic Systems using Refrigerants in High Aspect Ratio Multi-Microchannel Evaporators

Etienne Costa-Patry

Improving the energy efficiency of cooling systems can contribute to reduce the emission of greenhouse gases. Currently, most microelectronic applications are air-cooled. Switching to two-phase cooling systems would decrease power consumption and allow for ...

EPFL2011

On the truly meshless solution of heat conduction problems in heterogeneous media

Aurèle Parriaux, Jiannong Fang, Jian Zhao, Gaofeng Zhao

A truly meshless method based on the weighted least-squares (WLS) approximation and the method of point collocation is proposed to solve heat conduction problems in heterogeneous media. It is shown that, in the case of strong heterogeneity, accurate and sm ...

2009

Reduced Basis Methods and A Posteriori Error Estimators for Heat Transfer Problems

Simone Deparis, Gianluigi Rozza

This paper focuses on the parametric study of steady and unsteady forced and natural convection problems by the certified reduced basis method. These problems are characterized by an input-output relationship in which given an input parameter vector — mate ...

ASME2009