Publications associées à Métal précieux

Probing Catalytic Sites and Adsorbate Spillover on Ultrathin FeO2-x Film on Ir(111) during CO Oxidation

The spatially resolved identification of active sites on the heterogeneous catalyst surface is an essential step toward directly visualizing a catalytic reaction with atomic scale. To date, ferrous centers on platinum group metals have shown promising pote ...

Amer Chemical Soc2024

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Jan Van Herle, Suhas Nuggehalli Sampathkumar, Khaled Lawand, Zoé Mury

Anion exchange membrane water electrolysis (AEMWE) offers a green hydrogen production method that eliminates the need for platinum group metals (PGM) as electrocatalysts. This study employs a COMSOL (R) 6.0 model to simulate a 1x1 cm(2) Ni fibre - Raney (R ...

Elsevier2024

A customized MOF-polymer composite for rapid gold extraction from water matrices

Wendy Lee Queen, Daniel Teav Sun, Shuliang Yang, Jun Li, Li Peng, Olga Syzgantseva

With the fast-growing accumulation of electronic waste and rising demand for rare metals, it is compelling to develop technologies that can promotionally recover targeted metals, like gold, from waste, a process referred to as urban mining. Thus, there is ...

AMER ASSOC ADVANCEMENT SCIENCE2023

Development of Cyclopentadienylcobalt(III) Catalyzed Asymmetric C-H Functionalizations

Kristers Ozols

Transition metal catalyzed C-H activation plays a major role in modern organic chemistry, affording mild, selective and atom-efficient protocols. Most of current developments in the field rely on the use of several precious metals. As a consequence, an int ...

EPFL2022

Mapping Catalyst‐Solvent Interplay in Competing Carboamination/Cyclopropanation Reactions

Nicolai Cramer, Matthew Wodrich, Anne-Clémence Corminboeuf, Miyeon Chang, Simone Gallarati

Group 9 metals, in particular Rh III complexes with cyclopentadienyl ligands, are competent C–H activation catalysts. Recently, a Cp*Rh III catalyzed reaction of alkenes with N -enoxyphthalimides showed divergent outcome based on the solvent, with carboami ...

2022

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Atomic doping & coating for Electrocatalysis & Li-ion batteries

Albert Claude Jean-Pierre Daubry

Molybdenum atomic-doping on bio-waste derived nitrogen-doped conductive carbon electrocatalyst was synthesized and investigated for the dinitrogen reduction to ammonia in alkaline media. The assessment of the catalytic activity was found to be non-trivial ...

EPFL2022

Chiral Diimine Complexes of Earth-Abundant Transition Metals for Asymmetric Catalysis

Elena Braconi

The application of Earth-abundant metals in asymmetric catalysis is key to transition towards a more sustainable chemistry. In particular, expanding the library of redox-active ligands capable of supporting Earth-abundant metals is essential in order to re ...

EPFL2022

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

Galvanic replacement reactions of Ga and In with Cu for the synthesis of bimetallic nanoparticles

Laia Castilla Amorós

The need for efficient and selective catalysts, capable of driving important conversions to build a more sustainable society, encourages the development of synthetic approaches towards new nanomaterials. Cu-based bimetallic nanoparticles (NPs) promise to f ...

EPFL2022

Investigation on the Role of Pd, Pt, Rh in Methane Abatement for Heavy Duty Applications

Oliver Kröcher, Davide Ferri, Moyu Wang

Methane abatement remains a challenge in aftertreatment systems of natural gas engines, currently under discussion in combination with synthetic methane. In this study, Pt/Rh and Pd/Rh-based three-way catalysts are investigated under various transient cond ...

MDPI2022

Strengthening mechanisms in dilute and random solid solution high-entropy BCC alloys

Alireza Ghafarollahi

Tuning the mechanical properties of metals, including strength, through adjusting the type and/or concentration of added solute elements, has been recognized as an effective way to design and produce materials with desired or optimized mechanical propertie ...

EPFL2022

Emission reduction by targeted transient operations in three-way catalysts for heavy-duty natural gas applications

Moyu Wang

To curb the severe effects of climate change, our society needs to radically reduce its CO2 footprint. For the heavy-duty sector, where electrification is difficult, alternative fuels can be the solution. Methane-fueled engines have lower energy-specific C ...

EPFL2022

Revisiting the Impact of Morphology and Oxidation State of Cu on CO2 Reduction Using Electrochemical Flow Cell

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jing Gao, Dan Ren

Electroreduction of carbon dioxide (CO2) in a flow electrolyzer represents a promising carbon-neutral technology with efficient production of valuable chemicals. In this work, the catalytic performance of polycrystalline copper (Cu), Cu2O-derived copper (O ...

AMER CHEMICAL SOC2022

Additive manufacturing of a precious bulk metallic glass

Roland Logé, Jamasp Jhabvala, Güven Kurtuldu, Antonia Neels, Navid Sohrabi, Annapaola Parrilli

For the first time, a high-density amorphous and crack-free bulk metallic glass (BMG) based on a precious metal (PdCuNiP) was produced via additive manufacturing (AM). Laser powder-bed fusion (LPBF) was used for the fabrication of the samples, and led to a ...

2021

The design and synthesis of nanostructured hydrogen oxidation reaction electrocatalysts for hydroxide exchange membrane fuel cells

Weiyan Ni

Hydrogen fuel cell is a promising green technology that transforms the chemical energy in hydrogen into electricity. Currently, most of the efforts are focused on developing proton exchange membrane fuel cells (PEMFCs), however they are heavily dependent o ...

EPFL2021

Molecular Volcano Plots: Tools for Rationalizing and Predicting the Performance of Homogeneous Catalysts

Boodsarin Sawatlon

The generation of catalyst design tools is important for developing both economically and environmentally friendly reactions. This thesis focuses on the use and development of such a tool, molecular volcano plots, which have the ability to estimate catalyt ...

EPFL2021

Noble Metal Nanoparticles Stabilized by Hyper-Cross-Linked Polystyrene as Effective Catalysts in Hydrogenation of Arenes

Lioubov Kiwi

This work is addressing the arenes' hydrogenation-the processes of high importance for petrochemical, chemical and pharmaceutical industries. Noble metal (Pd, Pt, Ru) nanoparticles (NPs) stabilized in hyper-cross-linked polystyrene (HPS) were shown to be a ...

2021

Intrinsic luminescence blinking from plasmonic nanojunctions

Tobias Kippenberg, Christophe Marcel Georges Galland, Giulia Tagliabue, Magalí Alejandra Lingenfelder, Sachin Suresh Verlekar, Wen Chen, Karla Banjac, Aqeel Ahmed, Philippe Andreas Rölli

Plasmonic nanojunctions, consisting of adjacent metal structures with nanometre gaps, can support localised plasmon resonances that boost light matter interactions and concentrate electromagnetic fields at the nanoscale. In this regime, the optical respons ...

Nature Research2021

Anchoring single platinum atoms onto nickel nanoparticles affords highly selective catalysts for lignin conversion

Paul Joseph Dyson, Gabor Laurenczy, Zhaofu Fei, Antoine Philippe Van Muyden, Ulf Anders Hagfeldt, Jun Li, Lichen Bai, Linfeng Pan, Lu Chen, Yun Tong

Due to the highly complex polyphenolic structure of lignin, depolymerization without a prior chemical treatment is challenging, and new catalysts are required. Atomically dispersed catalysts are able to maximize the atomic efficiency of noble metals, simul ...

ELSEVIER2021