Publications associées à Liquide de refroidissement

A holistic investigation of photocatalytic hydrogen generation

Photocatalytic (PC) solar hydrogen production is a promising way to provide green hydrogen using only sunlight and abundant reactants such as water. PC approaches use catalytically active semiconductor particles suspended in liquid electrolytes. The partic ...

EPFL2023

Flow Boiling of Carbon Dioxide at Different Channel Orientations for the Thermal Management of Future Detector Technologies at the High-Luminosity Large Hadron Collider at CERN

David Schmid

The global warming potential (GWP) of working fluids in thermodynamic cycles and their environmental impact have been gaining considerable attention within the recent years. The global objectives on climate protection are becoming increasingly ambitious, w ...

EPFL2022

Compact Thermosyphon Cooling System For High Heat Flux Servers: Validation Of Thermosyphon Simulation Code Considering New Test Data

John Richard Thome, Jackson Braz Marcinichen, Filippo Cataldo, Raffaele Luca Amalfi

Passive, gravity-driven thermosyphons represent a stepchange in technology towards the goal of greatly reducing PUE (Power Usage Effectiveness) of datacenters by replacing energy hungry fans of air-cooling approach with a highly-reliable solution able to d ...

AMER SOC MECHANICAL ENGINEERS2021

Experimental investigation of sequential narrow impingement channels for turbine cooling

Peter Ott, Michele Gaffuri

Sequentially stacked impingement channels allow for a more effective use of the cooling fluid and can limit the heat transfer reduction due to the crossflow when the number of jets increases. In this paper, sequential impingement channels are experimentall ...

2021

Thermal management of components for high energy physics experiments and space applications

Timothée Robert Sophus Frei

High-energy physics (HEP) experiments and space missions share a common challenge: thermal management in harsh environments. The severe constraints in both fields make cooling of electronic components a major design concern. This thesis aims to develop hig ...

EPFL2021

Flow boiling heat transfer and two-phase flow phenomena of CO2 in macro-and micro-channel evaporators: Fundamentals, applications and engineering design

John Richard Thome

The paper presents a comprehensive review of fundamentals and engineering applications of CO2 flow boiling heat transfer, flow patterns and two-phase pressure drops in macro- and micro-channel evaporators. First, distinctions of macro- and micro-channels a ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Simulation and experimental validation of pulsating heat pipes

John Richard Thome, Jackson Braz Marcinichen, Philippe Aubin, Filippo Cataldo

The one-dimensional transient numerical code of JJ Cooling Innovation has been significantly improved to simulate the thermal/hydraulic performance of pulsating heat pipes (PHPs). Using a mechanistic approach, the liquid slug and vapor plug flows and their ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

Roland Logé, Nicola Colonna, Raffaele Esposito

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontall ...

2021

Operational Map And Thermal Performance Of A Thermosyphon Cooling System For Compact Servers

John Richard Thome, Jackson Braz Marcinichen, Filippo Cataldo, Raffaele Luca Amalfi

This paper advances the state-of-the-art in novel passive two-phase systems for more efficient cooling of datacenters and telecom central offices compared to the traditional air-based cooling solutions (e.g. aisle-based containment systems). The proposed p ...

AMER SOC MECHANICAL ENGINEERS2021

A Coarse-mesh Methodology for the Analysis of One and Two-phase Nuclear Reactor Thermal-hydraulics in a Multi-physics Context

Stefan Radman

The analysis of nuclear reactors for performance and safety assessment benefits from the use of computational tools. In this context, this work aims at the development and application of a thermal-hydraulics methodology and related software that respond to ...

EPFL2021

Systematic Sensitivity and Uncertainty Analysis of Sodium-Cooled Fast Reactor Systems

Friederike Bostelmann

Sodium-cooled fast reactor (SFR) technologies have the potential to guarantee energy supply and to reduce the burden of nuclear waste for future generations. For an adequate simulation of these reactor systems, well-established tools that have so far been ...

EPFL2020

On evaluation of thermophysical properties of transformer oil-based nanofluids: A comprehensive modeling and experimental study

Farzaneh Talebkeikhah, Mohsen Talebkeikhah

Transformer oil-based nanofluids are known to have higher thermal conductivity and heat transfer performance compared to conventional transformer oils. In this study, four different types of transformer oil-based nanofluids are synthesized using the well-k ...

ELSEVIER2020

Experimental characterisation of the thermohydraulic performance of a micro-pin fin evaporator: Heat transfer, flow visualization and modelling

Chiara Falsetti

The global tendency towards miniaturization driven by the microelectronics industry is pushing system density and packaging towards unprecedented values of thermal design power, with a dramatic reduction of the surface area of the devices. Vertical integra ...

EPFL2018

DEMO port plug design and integration studies

Minh Quang Tran

The EUROfusion Consortium established in 2014 and composed by European Fusion Laboratories, and in particular the Power Plant Physics and Technology department aims to develop a conceptual design for the Fusion DEMOnstration Power Plant, DEMO. With respect ...

IOP Publishing Ltd2017

An updated three-zone heat transfer model for slug flow boiling in microchannels

John Richard Thome, Mirco Magnini

This work proposes a novel physics-based model for the fluid mechanics and heat transfer associated with slug flow boiling in horizontal circular microchannels to update the widely used three-zone model of Thome et al. (2004). The heat transfer model has a ...

Pergamon-Elsevier Science Ltd2017

Innovative low-mass cooling systems for the ALICE ITS Upgrade detector at CERN

Manuel Gómez Marzoa

The Phase-1 upgrade of the LHC to full design luminosity, planned for 2019 at CERN, requires the modernisation of the experiments around the accelerator. The Inner Tracking System (ITS), the innermost detector at the ALICE experiment, will be upgraded by r ...

EPFL2016

Thermal-hydraulic modeling of a novel HTS CICC for nuclear fusion applications

Pierluigi Bruzzone

A thermal-hydraulic model has been developed for the novel cable-in-conduit conductor (CICC) recently proposed by ENEA, which foresees the use of 2nd Generation REBCO-based Coated Conductor tapes stacked into twisted grooves slotted into an Al core. A cent ...

IEEE Institute of Electrical and Electronics Engineers2016

Can Resistive-Type Fault Current Limiter Operate in Cryogen-Free Environment?

Bertrand Dutoit, Bertrand Dutoit

Superconducting fault current limiters are unique devices that offer fast response to fault without need of an external triggering system. Therefore, they are interesting for industrial use, although their price is high. The principle of the resistive faul ...

IEEE Institute of Electrical and Electronics Engineers2016

Potential of Small-Scale Turbomachinery for Waste Heat Recovery on Automotive Internal Combustion Engines

Jürg Alexander Schiffmann, Eliott Philippe Guenat, Violette Mounier, Kévin Rosset

This paper investigates the waste heat recovery potential of internal combustion engines, using organic Rankine cycles running on small-scale radial turbomachinery. ORC are promising candidates for low-grade thermal sources and the use of dynamic expanders ...

2015

Coupled 3-D Neutronics/Thermal-Hydraulics Optimization Study For Improving The Response Of A 3600 Mw(Thermal) Sfr Core To An Unprotected Loss-Of-Flow Accident

Rakesh Chawla, Aurélia Chenu, Konstantin Mikityuk, Jiri Krepel, Kaichao Sun

The sodium-cooled fast reactor (SFR), as a fast neutron spectrum system, is characterized by several performance advantages. In particular, the long-term operation of an SFR core in a closed fuel cycle will lead to an equilibrium state, where both reactivi ...

Amer Nuclear Soc2013