Publications associées à Corrosion par piqûres

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

The corrosion mechanisms of a Roman iron bezel ring were investigated by in-depth characterization of its uncommon corrosion pattern and thermodynamic modelling. A silver foil and altered glass remnants were identified, covered with thick strata of magneti ...

2024

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Lei Zhang, Kangning Zhao

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

Theoretical explanation of passivation behavior in OFP-Cu and OF-Cu

Du Wen, Na Li

This research presents a comprehensive comparative analysis of the passivation kinetics of OFP-Cu and OF-Cu in simulated repository electrolyte. The study employs a range of techniques, including potentiodynamic polarization, multi-step potentiostatic pola ...

Pergamon-Elsevier Science Ltd2024

Microstructure - Electrochemical Surface Reactivity Relationship of Electrochemically Grown Manganese Oxides Films

Roberto Cestaro

This Thesis provides a comprehensive and correlative investigation of the microstructure, chemical state, and electrochemical reactivity of manganese oxide (MnOx) films, aiming to gain a deeper understanding of the deposition and dissolution mechanism of M ...

EPFL2024

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

Effect of Mo addition on the mechanical and tribological properties of magnetron sputtered TiN films

Sami Rtimi

Ternary-based titanium nitride (TiN) thin films have drawn attention toward rational applications due to their wear resistance, high hardness, and corrosion resistance. The influence of Mo content on the structural, tribo-logical, and mechanical properties ...

ELSEVIER SCIENCE SA2023

Morphology of Nanostructured Tantalum Oxide Controls Stem Cell Differentiation and Improves Corrosion Behavior

Ece Uslu

Tantalum is receiving increasing attention in the biomedical field due to its biocompatible nature and superior mechanical properties. However, the bioinert nature of tantalum still poses a challenge and limits its integration into the bone tissue. To addr ...

Amer Chemical Soc2023

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

Lei Zhang, Kangning Zhao, Jun Lu, Xu Zhang

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules f ...

Amer Chemical Soc2023

Proposed residual stress model for hot‐rolled wide flange steel cross sections

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Residual stresses in hot-rolled wide flange steel cross sections may lead to premature yielding, accelerated corrosion and brittle fracture of steel members. The above phenomena lead to a loss of a steel member's stiffness and resistance under mechanical l ...

Ernst & Sohn2023

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Mounir Driss Mensi, Yubo Zhao

Fluorination of solvents, useful for non-aqueous lithium-based batteries, improves the electrochemical stability but decreases the ionic conductivity. Here, the authors report a targeted functionalization of an ether solvent to balance the electrolyte ioni ...

Nature Portfolio2023

Materials engineering for improved stability of perovskite solar cells

Yeonju Kim

Halide perovskites have gained tremendous attention over the past decade, but the poor stability of perovskite solar cells (PSCs) under operating conditions hampers their practical application. This thesis investigates materials that can be used to enhance ...

EPFL2023

Understanding and mitigating resistive losses in fired passivating contacts: role of the interfaces and optimization of the thermal budget

Christophe Ballif, Aïcha Hessler-Wyser, Franz-Josef Haug, Audrey Marie Isabelle Morisset, Sofia Libraro, Julien Hurni, Luca Massimiliano Antognini, Ezgi Genç

This work presents a study of p-type passivating contacts based on SiCx formed via a rapid thermal processing (RTP) step, using conditions compatible with the firing used to sinter screen-printed metallization pastes in industry. The contributions of the t ...

Elsevier2023

Activation of stainless steel 316L anode for anion exchange membrane water electrolysis

Jan Van Herle, Suhas Nuggehalli Sampathkumar, Peter Hugh Middleton, Thomas Benjamin Ferriday

The increased emphasis on renewable energy has resulted in a surge of R&D efforts into hydrogen and battery research. The intensive electrochemical environment surrounding the anodic oxygen evolution reaction (OER) has plagued both the activity and stabili ...

Elsevier2022

Elucidating the Rate-Limiting Processes in High-Temperature Sodium-Metal Chloride Batteries

Corsin Battaglia, Patrik Schmutz, Daniel Alexander Landmann

Sodium-metal chloride batteries are considered a sustainable and safe alternative to lithium-ion batteries for large-scale stationary electricity storage, but exhibit disadvantages in rate capability. Several studies identify metal-ion migration through th ...

WILEY2022

Passivating Defects of Perovskite Solar Cells with Functional Donor-Acceptor-Donor Type Hole Transporting Materials

Mohammad Khaja Nazeeruddin, Jianxing Xia, Yi Zhang, Kasparas Rakstys

In this study, a series of donor-acceptor-donor (D-A-D) type small molecules based on the fluorene and diphenylethenyl enamine units, which are distinguished by different acceptors, as holetransporting materials (HTMs) for perovskite solar cells is present ...

WILEY-V C H VERLAG GMBH2023

Deep defect passivation and shallow vacancy repair via an ionic silicone polymer toward highly stable inverted perovskite solar cells

Ulf Anders Hagfeldt, Bowen Yang, Hui Chen, Jiabao Yang, Tong Wang

Additive engineering is an effective strategy for defect passivation and performance improvement of perovskite solar cells (PSCs). However, few additives have achieved outstanding stability with high efficiency by simultaneously passivating deep and shallo ...

ROYAL SOC CHEMISTRY2022

Photochemical oxidation of phenols and anilines mediated by phenoxyl radicals in aqueous solution

Urs von Gunten, Silvio Canonica, Stephanie Christa Remke

Reactive intermediates formed upon irradiation of chromophoric dissolved organic matter (CDOM) contribute to the degradation of various organic contaminants in surface waters. Besides well-studied "short-lived" photo oxidants, such as triplet state CDOM (3 ...

PERGAMON-ELSEVIER SCIENCE LTD2022

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Stefano Mischler, Anna Neus Igual Muñoz, Angela Bermudez Castañeda

Modular hip joint implants were introduced in arthroplasty medical procedures because they facilitate the tailoring of patients’ anatomy, the use of different materials in one single configuration, as well as medical revision. However, in certain cases, su ...

2021

Emergence of Potential-Controlled Cu-Nanocuboids and Graphene-Covered Cu-Nanocuboids under Operando CO2 Electroreduction

Magalí Alejandra Lingenfelder, Fernando Pablo Cometto, Karla Banjac, Thanh Hai Phan

The electroreduction of CO2 (CO2RR) is a promising strategy toward sustainable fuels. Cu is the only Earth-abundant and pure metal capable of catalyzing CO2-to-hydrocarbons conversion with significant Faradaic efficiencies; yet, its dynamic structure under ...

AMER CHEMICAL SOC2021