Publications associées à Microstrip antenna

Enabling Wide Bandwidth in Substrate-Integrated Waveguide Slot Antennas by Using Low-Index Metamaterials

Romain Christophe Rémy Fleury, Amir Jafargholi, Jalaledin Tayebpour

This paper presents a solution to overcome the inherently limited bandwidth of substrate-integrated waveguide (SIW) slot antennas. It is analytically shown that by decreasing the permittivity of a dielectric loaded slot antenna, the resulting bandwidth inc ...

American Physical Society (APS)2024

Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Danick Briand, James Alec Pierce Bourely, Jaemin Kim, Xavier Aeby, Oleksandr Vorobyov

Research on chipless and passive architectures for environmental sensing is generating high interest because they do not require any semiconductor components or batteries to operate, thus resulting in an eco-friendlier footprint. This study demonstrates a ...

2024

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Q-Factor Bounds for Microstrip Patch Antennas

Anja Skrivervik

Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Circularly polarized planar antenna with axially symmetric beamwidth reconfigurability

Anja Skrivervik, Ismael Vico Triviño, Hannes Bartle

This contribution presents the design of a compact circularly polarized antenna featuring beamwidth reconfiguration in both the horizontal and vertical planes. The observed radiation patterns in each of the reconfigurable states present axial symmetry and ...

IEEE2023

Dual-Polarized SIW Slot Antenna Using ENZ Metamaterial for 5G and mmWave Applications

Romain Christophe Rémy Fleury, Amir Jafargholi

This paper presents a broadband dual-polarized substrate integrated waveguide (SIW) slot antenna. It is analytically shown that by decreasing the permittivity of a dielectricloaded slot antenna, the resulting bandwidth increases significantly, where the wi ...

IEEE2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

4-Port Microstrip planar resonator for multiband microwave material characterization applications

Anja Skrivervik, Sujith Raman

Planar microstrip resonators suitable for material characterization application are presented in this paper. The prototype consists of three resonators fed through four ports in a planar dielectric substrate without any additional resonators. The resonator ...

IEEE2022

Enhancing the beamwidth of low profile single-fed microstrip antennas using parasitic elements

Anja Skrivervik, Ismael Vico Triviño

In this paper we present a technique to broaden the beamwidth of conventional patch microstrip antennas by using parasitic elements. This technique allows to keep the main advantages of microstrip antennas while increasing their beamwidth. We provide guide ...

IEEE2022

Design and printing of a coplanar capacitive proximity sensor to detect the gap between dielectric foils edges

Danick Briand, Rubaiyet Iftekharul Haque, Martin Lubej

This paper presents the design and development of a coplanar capacitive proximity sensor for the detection of the gap between the edges of dielectric foils. The finite element analysis is applied to study the design of the sensor by investigating the effec ...

2022

Effects of surface rigidity and metallicity on dielectric properties and ion interactions at aqueous hydrophobic interfaces

Philip Robin Loche

Using classical molecular dynamics simulations, we investigate the dielectric properties at interfaces of water with graphene, graphite, hexane, and water vapor. For graphite, we compare metallic and nonmetallic versions. At the vapor-liquid water and hexa ...

AIP Publishing2022

Characterization of Microwave Substrates for High Accuracy and Long-Term Stability Using Full-Wave Microstrip Ring Resonator Method

Anja Skrivervik, Miroslav Veljovic, Yuanyan Su

An accurate material characterization method for microwave printed-circuit-board substrates is proposed by combining the microwave ring resonator method with iterative full-wave simulations. A detailed error analysis is performed quantitatively to compensa ...

IEEE2021

Antennas for CubeSat Communication

Miroslav Veljovic

CubeSats are a type of small satellites (< 500 kg) that weigh several kilograms and consist of multiple Units (U) measuring 100 × 100 × 113.5 mm3. CubeSats emerged as a low-cost alternative to conventional large satellites, and have since demonstrated capa ...

EPFL2020

Two-Element Antenna-Active Phase Shifter Packaging at 77 GHz

Anja Skrivervik, Efe Öztürk

This work presents a low cost and wire-bonded active phase shifter chip to RF circuitry on PCB board packaging for implementing a two-element phased array antenna at 77 GHz. The 1.5 mm × 1.1 mm chip is embedded in RO3003 PCB board and its GSG ports are wir ...

IEEE2019

Broadbeam microstrip patch antenna using higher order modes

Anja Skrivervik, Ismael Vico Triviño

The aim of this contribution is to assess the potential of using various microstrip radiating elements excited with different modes to achieve wide pattern beamwidths. The proposed antenna is made in classic microstrip technology and consists of a circular ...

The European Association on Antennas and Propagation (EurAAP)2019

A Comparison of Three Feeding Networks for CubeSat L/S-dual-band Stacked-Patch Antennas

Anja Skrivervik, Miroslav Veljovic

The CubeSat nanosatellite standard puts strict limitations on the antenna volume, resulting in a low impedance and axial-ratio (AR) bandwidths of patch antennas. The AR of a circularly polarized patch antenna can be improved with the introduction of a dedi ...

IEEE2019

Extension of the Unmatched-Media Time Reversal Method to Locate Soft Faults in Transmission Lines

Mario Paolone

An alternative method based on time reversal to locate solid faults in transmission line networks was recently proposed by Codino et al. in the paper “An alternative method for locating faults in transmission line networks based on time reversal” (IEEE Tra ...

2018

Compact Microstrip Feedings with an Elevated Ground Plane for Thick Folded SIW

Juan Ramon Mosig, Lei Wang, Qi Wu

Folded substrate integrated waveguide (FSIW) has been proposed for further size reduction, while keeping the advantages of traditional SIW. FSIW-based horn antennas are very promising in millimeter wave applications. To improve the bandwidth and efficiency ...

Ieee2016

Design of novel radiating elements for SATCOM phased arrays in Ku-Band

Baptiste Fernand Hornecker

The present thesis deals with the design of a planar antenna array for the communication between a civil aircraft (Dassault's Falcon) and an Inmarsat satellite. The final goal is to provide high speed Internet access in X/Ku-Band (8-12GHz / 12-18GHz), and ...

EPFL2016