Publications associées à Polyéthylène basse densité

Process-Induced Structures of Injection-Molded High-Density Polyethylene-Combining X-ray Scattering and Finite Element Modeling

The success of plastics heavily relies on fast melt processing methods used for large-scale industrial manufacturing, including injection molding. The hierarchical structure of the solid polymer depends on material selection combined with processing condit ...

Amer Chemical Soc2024

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Marianne Liebi, Manuel Guizar Sicairos

Injection molding is known to create a layered anisotropicmorphologyacross the sample thickness due to varying shear and cooling ratesduring the manufacturing process. In this study, scanning small-angleX-ray scattering was used to visualize and quantify t ...

AMER CHEMICAL SOC2023

X-ray qualification of hydrogenated amorphous silicon sensors on flexible substrate

Sylvain Dunand, Mikaël Martino, Nicolas Würsch, Luca Massimiliano Antognini, Matthew James Large

Hydrogenated amorphous silicon (a-Si:H) is a well known material for its radiation resistance and for the possibility of deposition on flexible substrates like Polyimide (PI), polyethylene terephthalate (PET) or polyethylene naphthalate (PEN). Due to the p ...

IEEE2023

Microstructure et usinabilité d'alliages de titane béta-métastable

Loïc Favre

Titanium has become in recent years an interesting material in many applications that require a combination of high mechanical properties and low density. It has the peculiarity of undergoing an allotropic transformation at 882°C. Below this temperature, ...

EPFL2023

Quantified Effects of Multiple Parameters on Inputs and Potential Sources of Microplastics from a Typical River Flowing into the Sea

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

As an important connection of terrestrial and marine ecosystems, rivers input multitudinous (micro)plastics into the oceans. However, comparisons of field and estimated riverine inputs of (micro)plastics and contributions of multiple parameters are limited ...

2022

Development of C-C and C-O bond cleavage catalysts for the depolymerization of plastics

Wei-Tse Lee

Chemical recycling of plastics provides more flexibility for materials circulation than landfill disposal or incineration. Intensive research efforts have been devoted to maximizing the efficiency of chemical recycling through catalyst development. The fro ...

EPFL2022

Recycling of Load-Bearing 3D Printable Double Network Granular Hydrogels

Esther Amstad, Matteo Hirsch, Alvaro Lino Boris Charlet, Sanjay Phileas Schreiber

Sustainable materials, such as recyclable polymers, become increasingly important as they are often environmentally friendlier than their one-time-use counterparts. In parallel, the trend toward more customized products demands for fast prototyping methods ...

WILEY-V C H VERLAG GMBH2022

Multiple Surface Site Three-Dimensional Structure Determination of a Supported Molecular Catalyst

Pierrick Berruyer, Moreno Lelli, David Benjamin Roger Antoine Gajan, Zhuoran Wang

The structural characterization of supported molecular catalysts is challenging due to the low density of active sites and the presence of several organic/organometallic surface groups resulting from the often complex surface chemistry associated with supp ...

AMER CHEMICAL SOC2022

Insights into the Horizontal and Vertical Profiles of Microplastics in a River Emptying into the Sea Affected by Intensive Anthropogenic Activities in Northern China

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

Studies focused only on surface water may underestimate microplastic abundance in aquatic environments. This was the first survey to investigate the vertical (surface, intermediate, and bottom waters) distribution and composition of microplastics (MPs) in ...

2021

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

Véronique Michaud

Nowadays the use of natural fiber composites has gained significant interest due to their low density, high availability, and low cost. The present study explores the development of sustainable 3D printing filaments based on rice husk (RH), an agricultural ...

2021

Effects of Anthropogenic Discharge and Hydraulic Deposition on the Distribution and Accumulation of Microplastics in Surface Sediments of a Typical Seagoing River: The Haihe River

Florian Frédéric Vincent Breider, Yang Liu, Wenxin Liu

Microplastics pollution in river systems has generated great concern; however, few studies have focused on the contributions of multiple influencing factors to microplastics in river systems. In the current study, we utilized data on microplastics in surfa ...

2020

Investigation and modeling of odors release from membrane holes on daily overlay in a landfill and its impact on landfill odor control

Sami Rtimi

In the present work, we studied the NH(3)and H2S odor fluxes between the exposed working area and the HDPE covering film holes of the daily overlay in an actual landfill site with a daily operating area of 1600 m(2)in Hangzhou, China. We showed that the od ...

2021

Shape Engineering of Metal-Organic Frameworks via MOF@Polymer Composite Fabrication

Bardiya Valizadeh

Metal-organic frameworks (MOFs) are a fascinating class of porous materials that have become the subject of research owing to their unique characteristics such as high surface areas, low densities, and structural tunability. Recently, the research has been ...

EPFL2020

Combined Nuclear Magnetic Resonance and Molecular Dynamics Study of Methane Adsorption in M-2(dobdc) Metal-Organic Frameworks

Berend Smit, Efrem Daniel Braun, Rocio Mercado, Amber Kashan Mace

We examine the diffusion of methane in the metal organic frameworks M-2(dobdc) (M = Mg, Ni, Zn; dobdc(4-) = 2,5-diwddo-1,4-benzenedicarboxylate) as a function of methane loading through a combination of nuclear magnetic resonance and molecular dynamics sim ...

2019

3D-Integration Of Printed Electrochemical Sensors In Pet Microfluidics For Biochemical Sensing

Danick Briand, Peter Van der Wal, Silvia Demuru, Angélique Martine Bionaz, Marc Olivier Joho

This paper presents a novel process for screen printed electrode fabrication, functionalization and integration in a polyethylene terephthalate (PET) fluidics system for electrochemical analysis. The innovative components utilized are: 1. 3D Through-Foil V ...

IEEE2019

Strategic advantages of reactive polyiodide melts for scalable perovskite photovoltaics

Michael Graetzel, Andrey Petrov

Despite tremendous progress in efficiency and stability, perovskite solar cells are still facing the challenge of upscaling. Here we present unique advantages of reactive polyiodide melts for solvent- and adduct-free reactionary fabrication of perovskite f ...

Nature Publishing Group2019

Extracellular bacterial inactivation proceeding without Cu-ion release: Drastic effects of the applied plasma energy on the performance of the Cu-polyester (PES) samples

Michaël Bensimon, Sami Rtimi

The widely different effects of Cu-polyester (PES) sputtered by high power impulse magnetron sputtering (HIPIMS) compared to the lower energy direct current magnetron sputtering (DCMS) leading to bacterial inactivation are addressed during the course of th ...

ELSEVIER SCIENCE BV2018

Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing

Philippe Renaud, Ludovic Serex, Arnaud Bertsch

Advances in 3D printing have enabled the use of this technology in a growing number of fields, and have started to spark the interest of biologists. Having the particularity of being cell friendly and allowing multimaterial deposition, extrusion-based 3D p ...

2018

Strategies for faster impregnation in melt thermoplastic resin transfer molding process

Damiano Salvatori

Continuous fiber thermoplastic composites are potential substitutes of steel in structural automotive components, since they combine fiber strength and rigidity with ductility, potential recyclability and low density of the thermoplastic (TP) matrix. Resin ...

EPFL2018

Photoluminescent, upconversion luminescent and nonlinear optical metal-organic frameworks: From fundamental photophysics to potential applications

Fatmah Ebrahim, Kyriakos Stylianou, Ngoc Tú Nguyên

Metal-organic frameworks (MOFs) are a class of porous materials prepared by the self-assembly of metal ions or clusters with organic ligands. The unique characteristics of MOFs, including structural tunability, high surface areas, low densities and tailore ...

2018