Publications associées à Lithographie extrême ultraviolet

High-efficiency non-ablative UV laser nano-scale processing of fused silica by stable filamentation

Yves Bellouard, Olivier Bernard, Benedikt Hermann, Luca Muscarella

Over the last decades, three-dimensional micro-manufacturing of fused silica via near-infrared ultrafast laser exposure combined with an etching step has become an established technique for producing complex three-dimensional components. Here, we explore t ...

2023

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Marcus Cemes, Ambrine Douhane

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Additive manufacturing of ceramics by two-photon lithography, volumetric 3D printing and high-resolution endo-printing

Georgia Konstantinou

Additive manufacturing is a growing sector of industrial production that allows the fabrication of parts with complex geometries and reduced waste. The context of this thesis is light-based additive manufacturing technologies. In the first part of the the ...

EPFL2022

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Olivier Martin, Christian Santschi, Hsiang-Chu Wang, Jeonghyeon Kim, Debdatta Ray

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022

FABRICATION AND ANALYSIS OF THIN FILM LITHUM NIOBATE RESONATORS FOR 5GHz FREQUENCY AND LARGE k(t)(2) APPLICATIONS

Luis Guillermo Villanueva Torrijo, Seniz Esra Küçük, Soumya Yandrapalli, Victor Plessky

This work presents the fabrication and analysis of suspended thin film Lithium Niobate resonators. The yield of the new fabrication process presented below is >90% showing devices with high k(t)(2) of 28% resonators at 5GHz, making them suitable for high f ...

IEEE2021

Fabrication of plasmonic structures with well-controlled nanometric features: a comparison between lift-off and ion beam etching

Olivier Martin, Christian Santschi, Banafsheh Abasahl

After providing a detailed overview of nanofabrication techniques for plasmonics, we discuss in detail two different approaches for the fabrication of metallic nanostructures based on e-beam lithography. The first approach relies on a negative e-beam resis ...

IOP PUBLISHING LTD2021

Nanopillars Enabling III-V Integration on Si (100) and (111)

Lucas Güniat

The majority of current semiconductor technologies are built on Si (100), such as the CMOS technology, or conventional solar cell devices. III-V semiconductors offer great perspectives given their high carrier mobility and direct band gap. However their in ...

EPFL2021

Fabrication and applications of AuAg alloy metasurfaces and hybrid metal dielectric nanoantennas

Debdatta Ray

The most prevalent materials used in the field of plasmonics are Au and Ag. However, for the past few years, the plasmonic community has also been looking for alternative materials that have lower losses than Au and higher stability than Ag. This thesis is ...

EPFL2021

Smooth GaN membranes by polarization-assisted electrochemical etching

Nicolas Grandjean, Jean-François Carlin, Joachim Armand Simonne Ciers

III-nitride membranes offer promising perspectives and improved device designs in photonics, electronics, and optomechanics. However, the removal of the growth substrate often leads to a rough membrane surface, which increases scattering losses in optical ...

AMER INST PHYSICS2021

Femtosecond laser-based optomechanical processes for permanent and high-precision fine alignment of optical systems

Saood Ibni Nazir

Miniaturization has been at the forefront of scientific research in the past decade covering diverse areas such as electronics, mechanics, and optics. While 'small is beautiful' may be a vast generalization, the true benefits of miniaturization are especia ...

EPFL2021

Diffractive optical elements in single crystal diamond

Niels Quack, Marcell Kristof Kiss

We demonstrate the design, fabrication, and experimental characterization of near-field binary phase transmission diffractive optical elements (DOEs) in single crystal diamond. Top-hat and arbitrary pattern DOE beam shapers were numerically optimized using ...

OPTICAL SOC AMER2020

Tolerancing the surface form of aspheric microlenses manufactured by wafer-level optics techniques

Toralf Scharf, Wilfried Noell, Jeremy Béguelin

Tolerancing is an important step toward the fabrication of high-quality and cost-effective lens surfaces. It is critical for wafer-level optics, when up to tens of thousands microlenses are fabricated in parallel and whose surfaces cannot be formed individ ...

OPTICAL SOC AMER2020

Deep-UV-Enhanced Approach for Low-Temperature Solution Processing of IZO Transistors with High-k AlOx/YAlOx Dielectric

Danick Briand, Jaemin Kim, Alessio Mancinelli

Solution processing is an attractive alternative to standard vacuum fabrication techniques for the large-area manufacturing of metal oxide (MOx)-based electron devices. Here, we report on thin-film transistors (TFTs) based on a solution-processed indium zi ...

AMER CHEMICAL SOC2020

Thermomechanical Nanocutting of 2D Materials

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio, Samuel Tobias Howell

Atomically thin materials, such as graphene and transition metal dichalcogenides, are promising candidates for future applications in micro/nanodevices and systems. For most applications, functional nanostructures have to be patterned by lithography. Devel ...

Wiley2020

Imaging plasma formation in isolated nanoparticles with ultrafast resonant scattering

Christoph Bostedt, Daniela Rupp, Alessandro Colombo

We have recorded the diffraction patterns from individual xenon clusters irradiated with intense extreme ultraviolet pulses to investigate the influence of light-induced electronic changes on the scattering response. The clusters were irradiated with short ...

2020

Grayscale e-beam lithography: Effects of a delayed development for well-controlled 3D patterning

Henning Paul-Julius Stahlberg

Grayscale electron beam lithography (g-EBL) is a fabrication technique that allows for tunable control of resist topography. In most cases, the height of the structures is in the submicron regime. Here, we present an extensive experimental characterization ...

2020

Template-assisted electrodeposition of nickel and nickel copper 3D microcomponents

Patrik Schürch

New types of metamaterials and architectured material require metallic materials with precise structural design in the microscale. However, additivemanufacturing of metallic structures in themicroscale has proven difficult, as the demand for the material q ...

EPFL2020

Shapes of rotating normal fluid He-3 versus superfluid He-4 droplets in molecular beams

Christoph Bostedt, Andre Al Haddad

Previous single-pulse extreme ultraviolet and x-ray coherent diffraction studies revealed that superfluid He-4 droplets obtained in a free jet expansion acquire sizable angular momentum, resulting in significant centrifugal distortion. Similar experiments ...

AMER PHYSICAL SOC2020

Intracellular recording of cardiomyocyte action potentials with nanopatterned volcano-shaped microelectrodes

Benoît Xavier Emmanuel Desbiolles

Micro-nanotechnology based multielectrode arrays have led to remarkable progress in the field of transmembrane voltage recordings of excitable cells. However, electrode geometries alone have failed to produce a cell-electrode interface that is sufficiently ...

EPFL2020