Publications associées à Analyse thermique

Field-controlled multicritical behavior and emergent universality in fully frustrated quantum magnets

Phase transitions in condensed matter are a source of exotic emergent properties. We study the fully frustrated bilayer Heisenberg antiferromagnet to demonstrate that an applied magnetic field creates a previously unknown emergent criticality. The quantum ...

Nature Portfolio2024

A novel fatigue life prediction methodology based on energy dissipation in viscoelastic materials, synergistic effects of stress level, stress ratio, and temperature

Thomas Keller, Lulu Liu, Abdolvahid Movahedirad

This work introduces a new methodology to predict the fatigue life of viscoelastic materials by considering the creep effect on fatigue behavior under the concurrent effects of stress level, stress ratio, and temperature. The model established based on the ...

2024

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach, Rafal Wróbel, Thomas Mayer

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...

2023

Melting pseudosymmetry and thermal expansion in 3-benzoylpropionic acid

Tomasz Poreba

The thermal behavior of 3-benzoylpropionic acid (BPA) was investigated using single-crystal and synchrotron powder X-diffraction, as well as differential scanning calorimetry analysis. The study revealed the existence of two subtly distinct structures of B ...

ROYAL SOC CHEMISTRY2023

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mário Alexandre De Jesus Garrido, Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva, Shashank Bishnoi, Sreejith Krishnan

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

Pergamon-Elsevier Science Ltd2023

Mimicking Loading-Induced Cartilage Self-Heating in Vitro Promotes Matrix Formation in Chondrocyte-Laden Constructs with Different Mechanical Properties

Dominique Pioletti, Peyman Karami, Naser Nasrollahzadeh Mamaghani, Theofanis Stampoultzis, Yanheng Guo

Articular cartilage presents a mechanically sensitive tissue. Chondrocytes, the sole cell type residing in the tissue, perceive and react to physical cues as signals that significantly modulate their behavior. Hyaline cartilage is a connective tissue with ...

2023

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Jacobus Gerardus Rudolph Staal

Liquid composite moulding methods are widely applied for manufacturing of fibre reinforced polymer (FRP) composites and consist of two main stages: impregnation of fibrous reinforcements by a liquid monomer resin and curing of this resin. This thesis work ...

EPFL2023

A long-term study on structural changes in calcium aluminate silicate hydrates

Christian Ludwig, Barbara Lothenbach, Sonya Barzgar, Yu Yan, Mohamed Tarik

Production of blended cements in which Portland cement is combined with supplementary cementitious materials (SCM) is an effective strategy for reducing the CO2 emissions during cement manufacturing and achieving sustainable concrete production. However, t ...

SPRINGER2022

Characterization of water sorption cycle in the cement microstructure of controlled oxide composition

Monisha Rastogi

This thesis investigates the water vapour sorption behaviour of samples with maximized calcium-silicate-hydrate (C-S-H) content. Primarily, the role of heterogeneous and homogeneous cavitation has been studied during the drying of cementitious materials. C ...

EPFL2022

Effect of chromium content on microstructural evolution of CoNiAlW superalloy

Cyril Cayron

Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...

SPRINGER HEIDELBERG2022

Paper of RILEM TC 282-CCL: mineralogical characterization methods for clay resources intended for use as supplementary cementitious material

Franco Alberto Zunino Sommariva, Ruben Anton Snellings, Alastair Thomas Matthew Marsh, Adrian Alujas Diaz

To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...

SPRINGER2022

Medipix4, a high granularity four sides buttable pixel readout chip for high resolution spectroscopic X-ray imaging at rates compatible with medical CT scans

Viros Sriskaran

Medipix4 is the latest member in the Medipix/Timepix family of pixel detector chips aimed at high rate spectroscopic X-ray imaging using high-Z materials. The chip address the limitations of conventional hybrid pixel detectors for X-ray imaging. Its predec ...

EPFL2022

Methylidyne Adsorption on Pt(211) Probed by Reflection Absorption Infrared Spectroscopy (RAIRS)

Rainer Beck, Ana Gutiérrez González, Harmina Vejayan

Methylidyne, CH(ads), adsorbed on a Pt(211) surface and its interaction with chemisorbed hydrogen atoms was studied by reflection absorption infrared spectroscopy (RAIRS). Methylidyne was formed on Pt(211) by methane dissociation from a molecular beam foll ...

2022

NIR Fluorescence lifetime macroscopic imaging with a time-gated SPAD camera

Edoardo Charbon, Claudio Bruschini, Arin Can Ülkü

The performance of SwissSPAD2 (SS2), a large scale, widefield time-gated CMOS SPAD imager developed for fluorescence lifetime imaging, has recently been described in the context of visible range and fluorescence lifetime imaging microscopy (FLIM) of dyes w ...

SPIE-INT SOC OPTICAL ENGINEERING2022

Coupled segregation mechanisms of Sc, Zr and Mn at theta ' interfaces enhances the strength and thermal stability of Al-Cu alloys

Baptiste Thomas Jean Rouxel, Lu Jiang

The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Partitioning soil organic carbon into its centennially stable and active fractions with machine-learning models based on Rock-Eval (R) thermal analysis (PARTY(SOC)v2.0 and PARTY(SOC)v2.0 (EU))

Juan Carlos Quezada Rivera

Partitioning soil organic carbon (SOC) into two kinetically different fractions that are stable or active on a century scale is key for an improved monitoring of soil health and for more accurate models of the carbon cycle. However, all existing SOC fracti ...

COPERNICUS GESELLSCHAFT MBH2021

Cyclic thermomechanical behaviour of pile-soil interface and design methods for energy pile foundations

Elena Ravera

Energy piles are shallow geothermal systems integrated into structures already required for structural functions of civil works that provide both geothermal energy supply and structural support to the built environments. This research work is driven by the ...

EPFL2021

Promoting Persistent Superionic Conductivity in Sodium Monocarba-closo-dodecaborate NaCB11H12 via Confinement within Nanoporous Silica

Mirjana Dimitrievska

Superionic phases of bulk anhydrous salts based on large cluster-like polyhedral (carba)borate anions are generally stable only well above room temperature, rendering them unsuitable as solid-state electrolytes in energy-storage devices that typically oper ...

AMER CHEMICAL SOC2021