Publications associées à Thermostat

Impact of Standard versus Tracked-based User Behavior into Energy Simulations of Open-Space Offices

Dolaana Khovalyg, Verena Marie Barthelmes, Arnab Chatterjee

This simulation-based study aimed to contribute to gaining knowledge on how much the deviation between occupant-related input by the national standard and by insitu measurements might impact predictions of heating/cooling needs in offices. Analysis was per ...

2023

Experimental study of the hydrodynamic and thermal performances of ventilated wall structures

Dolaana Khovalyg, Mohammad Rahiminejad

The presence of a ventilated air gap behind the external cladding in a building envelope is known to have a tangible contribution to the overall performance of the wall assembly. In the present study, the hydrodynamic and thermal performances of ventilated ...

2023

Efficient and Accurate Peer-to-Peer Training of Machine Learning Based Home Thermal Models

Rachid Guerraoui, Alexandre David Olivier Maurer, Omid Ardakanian

The integration of smart thermostats in home automation systems has created an opportunity to optimize space heating and cooling through the use of machine learning, for example for thermal model identification. Nonetheless, its full potential remains unta ...

Assoc Computing Machinery2023

Homothetic Tube Model Predictive Control With Multi-Step Predictors

Giancarlo Ferrari Trecate, Danilo Saccani, Melanie Nicole Zeilinger

We present a robust model predictive control (MPC) framework for linear systems facing bounded parametric uncertainty and bounded disturbances. Our approach deviates from standard MPC formulations by integrating multi-step predictors, which provide reduced ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Efficacy of temporal and spatial abstraction for training accurate machine learning models: A case study in smart thermostats

Rachid Guerraoui, Alexandre David Olivier Maurer, Omid Ardakanian

Smart thermostats are increasingly popular in homes and buildings as they improve occupant comfort, lower energy use in heating and cooling systems, and reduce utility bills by automatically adjusting room temperature according to measurements of their bui ...

ELSEVIER SCIENCE SA2023

Reaching Thermal Comfort Zone Limits for Resilient Building Operation: A Winter Case Study for Offices

Dolaana Khovalyg, Verena Marie Barthelmes, Arnab Chatterjee

A specific range of acceptable indoor thermal conditions is stipulated by building performance standards to assure minimum dissatisfaction of occupants. Thus, the operation of buildings in practice tends to follow a cautious approach by setting the indoor ...

Routledge2022

Microchannel cooling for the LHCb VELO Upgrade I

Alessandro Mapelli, Giulia Romagnoli, Victor Coco

The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase CO2 for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale applic ...

ELSEVIER2022

Domestic hot water optimizing potential in existing or renovated multifamily residential buildings

Flourentzos Flourentzou, Joshua Pereira

In a Swiss case study of the ReCO2st research project, hot water optimization demonstrated a high potential for energy savings with low investment costs. The optimization started with the end user to reduce first hot water consumption. Energy-efficient sho ...

IOP PUBLISHING LTD2021

Thermomechanical behavior of underground energy infrastructures

Jacopo Zannin

The employment of geostructures as structural supports and as heat exchangers represent an effective, renewable and sustainable way to satisfy thermal needs of the built environment. The structural support of conventional geotechnical structures is coupled ...

EPFL2020

Two-phase and oil-free co-rotating scroll compressor/expander

Jürg Alexander Schiffmann

This paper discusses experimental and theoretical investigations about a re-designed co-rotation scroll machine, operating in compressor and expander mode. The machine has been tested under various operational conditions, with the aim to determine the infl ...

2019

Which sensor type at which location should offices with south orientated window choose to improve comfort and reduce energy consumption?

Dolaana Khovalyg

The common placement of thermostats in offices might not reflect the actual thermal environment around occupants and influence the energy use. In this research, it is questioned which type of thermostat at which location better represents the conditions in ...

2019

Optimised Heat Pump Management for Increasing Photovoltaic Penetration into the Electricity Grid

Christophe Ballif, Lionel Benjamin Bloch, Jordan Holweger, Cristian Sanchez Perez

Advanced control of heat pumps with thermal storage and photovoltaics has recently been promoted as a promising solution to help decarbonise the residential sector. Heat pumps and thermal storage offer a valuable flexibilisation mean to integrate stochasti ...

2019

Heat flux analysis of Type-I ELM impact on a sloped, protruding surface in the JET bulk tungsten divertor

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia, Alessandro Pau, Pierre-Thomas Paul Brun, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Mikhail Maslov, Nicola Vianello, Miguel Fernández Ruiz, Federico Nespoli, Antonio José Pereira de Figueiredo, Liang Yao, Yao Zhou, David Pfefferlé, Dalziel Joseph Wilson, Robin Humphry-Baker, Davide Galassi, José Pedro Rebelo Ferreira Marques, Ana Francisca Leal Silva Soares, Jonathan Marc Philippe Faustin, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Julio Rodriguez, Hamish William Patten, Jonnathan Cesar Hidalgo Acosta, , , , , , , , ,

Life cycle efficiency ratio: a new performance indicator for a life cycle driven approach to evaluate the potential of ventilative cooling and thermal inertia

Flourentzos Flourentzou, Thomas Bernard Paul Jusselme, Arianna Brambilla, Jérôme Philippe Bonvin

Building envelope design has gained importance as a means to reduce heating and cooling demand related to a building’s operational phase. However, in high internal load buildings, such as offices, internal gains can easily lead to overheating. Thermal iner ...

2018

Equivalent electricity storage capacity of domestic thermostatically controlled loads

Fabrizio Sossan

A method to quantify the equivalent storage capacity inherent the operation of thermostatically controlled loads (TCLs) is developed. Equivalent storage capacity is defined as the amount of power and electricity consumption which can be deferred or anticip ...

Pergamon-Elsevier Science Ltd2017

Real-Time Control of an Ensemble of Heterogeneous Resources

Jean-Yves Le Boudec, Andrey Bernstein, Niek Johannes Bouman

This paper focuses on the problem of controlling an ensemble of heterogeneous resources connected to an elec- trical grid at the same point of common coupling (PCC). The controller receives an aggregate power setpoint for the ensemble in real time and trac ...

2017

Turbocompressors for Domestic Heat Pumps – A Critical Review

Jürg Alexander Schiffmann, Jean-Baptiste Carré

Small-scale, oil-free radial compressors on gas lubricated bearings represent a promising alternative to state-of-the-art compressor technology for driving domestic sized heat pumps. The inherent characteristics of turbocompressors manage to fit the heat p ...

2017

The DEMO wall load challenge

Ambrogio Fasoli, Jonathan Graves, Jan Horacek, David Pfefferlé, Samuel Lanthaler, Bernhard Sieglin, Hartmut Zohm

For several reasons the challenge to keep the loads to the first wall within engineering limits is substantially higher in DEMO compared to ITER. Therefore the pre-conceptual design development for DEMO that is currently ongoing in Europe needs to be based ...

IOP Publishing Ltd2017

Multi-objective optimization and exergoeconomic analysis of a combined cooling, heating and power based compressed air energy storage system

François Maréchal, Ligang Wang, Erren Yao

Compressed air energy storage technologies can improve the supply capacity and stability of the electric- ity grid, particularly when fluctuating renewable energies are massively connected. While incorporating the combined cooling, heating and power system ...

Elsevier2017

Optimized pcm-based heat exchanger for infant incubator

Véronique Michaud, Florian Dujonc, Matthieu Gani, Maria Benavente Miana, Benjamin Rime

The invention relates to a PCM-based heat exchanger (1) exploiting the characteristics of a phase change material (PCM), comprising a base (100); a metallic heat exchanger (101) adapted to be included into the base (100) and having a plurality of hollow vo ...

2017