Publications associées à Engineered wood

Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates

Thin-laminate composites with thicknesses below 200 mu m hold significant promise for future, larger, and lighter deployable structures. This paper presents a study of the time-dependent failure behavior of thin carbon-fiber laminates under bending, focusi ...

2024

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Robotic Assembly of Integrally-Attached Timber Plate Structures: From Computational Design to Automated Construction

Nicolas Henry Pierre Louis Rogeau

The digitization of timber construction, the emergence of engineered wood products, and the urgent need to drastically reduce buildings' environmental impact have given a rebirth to wood as a construction material. On the one hand, increasing the use of ti ...

EPFL2023

Process development of pre-impregnated hybrid thin-ply composites

Alexios Argyropoulos

Thin-ply composites, obtained with recently developed fiber spreading techniques, rapidly gained industrial interest because they offer a large composite design freedom, and lead to a composite tensile strength that is close to that of the individual fiber ...

EPFL2023

Steel Sheet Sheathed Cold-Formed Steel Framed In-line Wall Systems. I: Impact of Structural Detailing

Fani Derveni

The North American construction industry has seen substantial growth in the use of cold-formed steel (CFS) framing for midrise buildings in recent years. In seismic zones, CFS-framed buildings utilize shear walls to provide the primary lateral resistance t ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Fire performance evaluation of GFRP-balsa sandwich bridge decks

Niloufar Vahedi

Bridges are a critical component of national infrastructures and economies. A significant percentage of bridges built all around the world are made of reinforced concrete which according to building codes have a life span between 80-100 years. However, str ...

EPFL2022

An integrated design tool for timber plate structures to generate joints geometry, fabrication toolpath, and robot trajectories

Yves Weinand, Nicolas Henry Pierre Louis Rogeau, Pierre Latteur

This paper presents an integrated design tool for structures composed of engineered timber panels that are connected by traditional wood joints. Recent advances in computational architecture have permitted to automate the fabrication and assembly of such s ...

2021

Development of Novel Standardized Structural Timber Elements Using Wood-Wood Connections

Julien Gamerro

Traditional wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners and bonding processes in modern timber constructions. However, the emergence of digital fabrication and innovative engineered timber products ha ...

EPFL2020

Experimental investigations on the load-carrying capacity of digitally produced wood-wood connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

The rise of digital fabrication has increased the use of wood-wood connections inspired by traditional carpentry in modern timber constructions. With recent developments on standard construction systems, the mechanical behavior of such joints for in-plane ...

2020

Mechanical properties of natural fiber composites produced using dynamic sheet former

Composites formed from wood fibers and man-made cellulosic fibers in PLA (polylactic acid) matrix, manufactured using sheet forming technique and hot pressing, are studied. The composites have very low density (due to high porosity) and rather good elastic ...

2020

Joinery Solver for Whole Timber Structures

Yves Weinand, Petras Vestartas

This paper presents a digital joinery generation method for whole-timber structures using wood-wood connections. The research is based on a collaboration with a local timber company located in a mountain area [1]. In this context, there is a need to explor ...

2020

An Analytical Method to Predict the Structural Behavior of Timber-Concrete Structures With Brittle-to-Ductile Shear Connector Laws

Eugen Brühwiler, Luca Sorelli

Timber-Concrete Composite (TCC) structures allow taking synergistic advantage of the properties of both materials to optimize the overall performances in terms of lightness, slenderness, acoustic insulation, vibrational behaviour and environmental footprin ...

ELSEVIER SCI LTD2020

Mechanical properties of a balsa wood veneer structural sandwich core material

Thomas Keller, Anastasios Vassilopoulos, Niloufar Vahedi

Balsa wood is an appropriate core material for structural sandwich applications due to its high strength- and stiffness-to-weight ratios. However, the mechanical properties vary considerably owing to the inherent scattering of natural wood materials. One a ...

2020

Characterization of mortar-timber and timber-timber cyclic friction in timber floor connections of masonry buildings

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida

The seismic performance of buildings depends critically on the stiffness and strength of storey diaphragms. Whilst for modern reinforced concrete or steel structures the connection between floors and lateral resisting members is often assumed as monolithic ...

SPRINGER2020

Improving delamination resistance through tailored defects

John Botsis

Delamination is a well-known damage mode exhibited by laminated composites which has been extensively studied in unidirectional laminates (UD). In this work, a novel strategy consisting of the introduction of a small interlaminar defect to enhance the frac ...

2020

Statistical accuracy for estimations of large wood blockage in a reservoir environment

Anton Schleiss, Michael Pfister, Paloma Furlan, José Pedro Gamito de Saldanha Calado Matos

The blockage of weirs or bridges by in-stream wood can reduce the flood discharge capacity, leading to hazardous situations. To assess the related risk, blocking probabilities quantifications are needed. However, large wood has a random behaviour and it is ...

SPRINGER2020

Modelling Workflow for Segmented Timber Shells using Wood-wood Connections

Yves Weinand, Julien Gamerro, Nicolas Henry Pierre Louis Rogeau, Petras Vestartas

This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...

Springer2019

Transverse cracking in the bulk and at the free edge of thin-ply composites: experiments and multiscale modelling

John Botsis, Robin Amacher, Joël Cugnoni, Sébastien Kohler

Thin-ply composites were shown to exhibit significantly delayed transverse cracking, but the linear onset of damage scaling with ply thickness reported by Amacher et al. (2014) did not correspond to the established LEFM based in situ strength model. This s ...

2019

Crushing and intrusion resistance improvement of aluminum beams by carbon/epoxy composite patches

Véronique Michaud, Baris Çaglar, Jonathan Friedli, Yann Albert Gérard Lebaupin, Mathieu Piccand

This study investigates the intrusion and crushing performance of hybrid fiber metal laminates based on aluminum and carbon fiber reinforced polymers, in comparison to reference aluminum parts, made from AA6451 or AA7075 automotive grade alloys. A first se ...

ELSEVIER SCI LTD2019

Multiscale experimental characterisation and modelling of transverse cracking in thin-ply composites

Sébastien Kohler

In this work, the damage dependency on ply thickness is investigated experimentally for three different thin-ply CFRP quasi-isotropic laminates, with constituents spanning a large range of properties. It is shown that free edge damage mechanisms, observed ...

EPFL2019