Publications associées à Fretting

A story of two transitions: From adhesive to abrasive wear and from ductile to brittle regime

Jean-François Molinari, Sacha Zenon Wattel

Atomistic simulations performed with a family of model potential with tunable hardness have proven to be a great tool for advancing the understanding of wear processes at the asperity level. They have been instrumental in finding a critical length scale, w ...

2024

Effect of wear particles and roughness on nanoscale friction

Jean-François Molinari, Enrico Milanese, Tobias Brink

Frictional contacts lead to the formation of a surface layer called the third body, consisting of wear particles and structures resulting from their agglomerates. Its behavior and properties at the nanoscale control the macroscopic tribological performance ...

2022

Understanding the mechanisms of adhesive wear for heterogeneous materials through atomistic simulations

Jean-François Molinari, Antonio Joaquin Garcia Suarez, Sacha Zenon Wattel

When two rough surfaces slide against each other, two main behaviors can be observed at the asperity level: A ductile behavior where the asperities tend to smooth out or a brittle behavior where the asperities detach and form debris. Recently, a critical l ...

2022

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

Fretting corrosion between bone and calcium phosphate-calcium titanate coatings

Stefano Mischler, Adriana Esguerra Arce

Biocompatibility is one of the biggest challenges for biomaterials development. This issue arises in the case of coatings. Calcium phosphate (CP) coatings are currently used to cover femoral stem implants, while calcium titanate (CT) has also been proposed ...

ELSEVIER SCIENCE SA2018

Degradation of modular hip joint implants : a corrosion and tribocorrosion approach

Angela Bermudez Castañeda

Total hip joint arthroplasty is a medical procedure to replace a natural failed joint by an artificial joint to improve the quality of life of the patient. In spite of its broad success, there is a concern about the relation between the presence of modular ...

EPFL2018

Adhesive wear mechanisms uncovered by atomistic simulations

Jean-François Molinari, Enrico Milanese, Ramin Aghababaei, Tobias Brink, Lucas Henri Galilée Frérot

In this review, we discuss our recent advances in modeling adhesive wear mechanisms using coarse-grained atomistic simulations. In particular, we present how a model pair potential reveals the transition from ductile shearing of an asperity to the formatio ...

SPRINGEROPEN2018

On the debris-level origins of adhesive wear

Jean-François Molinari, Ramin Aghababaei, Derek Warner

Every contacting surface inevitably experiences wear. Predicting the exact amount of material loss due to wear relies on empirical data and cannot be obtained from any physical model. Here, we analyze and quantify wear at the most fundamental level, i.e., ...

Natl Acad Sciences2017

Atomic aluminum content (x) effect on fretting-corrosion of Ti1-xAlxN coatings for orthopedic applications

Stefano Mischler, Adriana Esguerra Arce

Normal micro-movements at the bone-implant interface originate fretting-corrosion processes, thus releasing wear debris from the bone and metallic devices and compromising the fixability of the implant. Titanium aluminum nitride (Ti1-xAlxN) coatings have b ...

Elsevier Science Sa2016

Critical length scale controls adhesive wear mechanisms

Jean-François Molinari, Ramin Aghababaei, Derek Warner

The adhesive wear process remains one of the least understood areas of mechanics. While it has long been established that adhesive wear is a direct result of contacting surface asperities, an agreed upon understanding of how contacting asperities lead to w ...

Springer2016

Self-Replenishing, Wear-Resistant and Anti-Sticking Surfaces Based on Liquid Impregnation of Microstructured Mesoporous α-AI₂O₃ [Alpha Alumina] Matrices

Sriharitha Rowthu

Fabrication of wear-resistant omniphobic surfaces is a persistent scientific challenge and essential for various applications such as in paint industries, fluid transport, antifouling, reduction of friction drag on ship hulls, and stain resistant textiles. ...

EPFL2016

Wear of CoCrMo alloys used in metal-on-metal hip joints: A tribocorrosion appraisal

Stefano Mischler

A good biocompatibility, excellent mechanical properties and high corrosion resistance characterize CoCrMo alloys. Therefore they are widely used for artificial joints in biomedical implants. However, the degradation of the implants during service life lea ...

Elsevier2013

Tribo-electrochemical characterization of metallic biomaterials for total joint replacement

Stefano Mischler

Knee and hip joint replacement implants involve a sliding contact between the femoral component and the tibial or acetabular component immersed in body fluids, thus making the metallic parts susceptible to tribocorrosion. Micro-motions occur at points of f ...

Elsevier2012

Load dependence of oxidative wear in metal/ceramic tribocouples in fretting environment

Abhishek Tewari

For a large number of non-oxideceramic/metal as well as for non-oxide particulate reinforced composite/metal tribocouples,oxidative wear is reported to play a major role in the overall damage and material removal process.The designing of new materials with ...

2012

Fretting-corrosion behavior of beta titanium alloys in simulated synovial fluid

Stefano Mischler

Fretting-corrosion is a material degradation process resulting from the combined action of a corrosive environment and small displacement fretting wear. In this work, the fretting-corrosion behavior of Ti-12.5Mo, Ti-13Nb-13Zr, and Ti-29Nb-13Ta-4.6Zr, beta ...

2011

Dry wear and tribocorrosion mechanisms of pulsed plasma nitrided Ni-Cr alloy

Stefano Mischler

The dry wear and tribocorrosion behaviour of pulsed plasma treated and non-treated Ni-Cr alloys sliding against alumina at 15 N were investigated by using a reciprocating wear test rig equipped with an electrochemical cell. The pulsed plasma treatment prod ...

2011

Tribocorrosion of stainless steel in sulfuric acid: Identification of corrosion-wear components and effect of contact area

Electrochemical and friction measurements during unidirectional sliding tests are used to monitor and to evaluate the tribocorrosion behavior of a passivating material. Tribocorrosion is the interplay between chemical, electrochemical, and mechanical proce ...

2010

Microstructure, properties and biocompatibility of the nitrided Ti-6Al-4V alloy for medical application

Philippe Buffat

Investigation of the microstructure, properties and biocompatibility of the Ti-6Al-4V alloy nitrided under glow discharge was performed. The microstructural analyses were carried out using light microscopy, X-ray diffraction, analytical scanning and transm ...

Trans Tech Publications Ltd.2006