Publications associées à Accident nucléaire de Fukushima

Innovative dud detection based on JET DT experience

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Andrea Cavaliere

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Extension of the OFFBEAT fuel performance code to finite strains and validation against LOCA experiments

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro, Edoardo Luciano Brunetto

The mechanical analysis of nuclear fuel behavior under base-irradiation conditions has traditionally been performed adopting the small-strain approximation. However, many cases of interest for fuel behavior involve the occurrence of large rod deformations ...

ELSEVIER SCIENCE SA2023

Towards coupling conventional with high-fidelity fuel behavior analysis tools

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro, Edoardo Luciano Brunetto

Multi-dimensional fuel performance codes have the potential to enhance the understanding of complex phenomena affecting fuel integrity, but their application is often limited by the high computational cost. Recognizing that many multi-dimensional aspects s ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Uncertainty analyses of spent nuclear fuel decay heat calculations using SCALE modules

Andreas Pautz, Dimitri Rochman, Stefano Caruso

Decay heat residuals of spent nuclear fuel (SNF), i.e., the differences between calculations and measurements, were obtained previously for various spent fuel assemblies (SFA) using the Polaris module of the SCALE code system. In this paper, we compare dec ...

2021

A design proposal for the European DEMO superconducting bus bars and current leads

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche, Roberto Guarino

The integration of the feeder system in a tokamak involves complex engineering, manufacturing and logistics issues. Therefore, within the pre-conceptual design activities of the European DEMO fusion reactor, it is important to provide a preliminary sizing ...

2021

Structural performance and mechanical properties investigation of spent nuclear fuel rods under static and dynamic bending loads

Efstathios Vlassopoulos

Currently, most Spent Nuclear Fuel (SNF) is kept safely in storage either at on-site facilities or at centralized interim storage sites. Moreover, many countries face delays in implementing their waste management programmes for SNF and high-level waste dis ...

EPFL2021

Aqueous effluent treatment system

Jeremy Luterbacher, Gaël Peng, Frédéric Edouard Juillard, Lionel Bertschy

Aqueous effluent treatment system (2) including a separation reactor (4) having a reactor chamber fluidly connected to an aqueous effluent source (3), connected via a pump (5) to an inlet (34) of the reactor chamber, a fluid extraction system (6) connected ...

2020

Understanding the Reconstruction of Personal Networks Through Residential Trajectories

Vincent Kaufmann, Guillaume Simon Joseph Drevon, Gil Viry

This article examines how residential trajectories influence the spatiality and composition of personal networks. Three mechanisms are considered: the addition of spatially close network members, the selection of spatially distant network members, and the ...

2020

Review of kinetic modulation experiments in low power nuclear reactors

Vincent Pierre Lamirand

The safety improvement of nuclear reactors requires continuous efforts in understanding the fundamental physical quantities related to the fission process. In neutronic models, the reactor dynamics is covered by the kinetic parameters to characterize the t ...

2020

Preliminary design and analysis of Liquid Fuel Molten Salt Reactor using multi-physics code GeN-Foam

Carlo Fiorina

In this study, a hypothetical fast spectrum Liquid Fuel Molten Salt Reactor (LFMSR) core is modeled using the multiphysics C++ code GeN-Foam (General Nuclear Foam). GeN-Foam is based on OpenFOAM, a C++ opensource library for solution of continuum mechanics ...

ELSEVIER SCIENCE SA2020

Numerical Simulation and Validation of Aerosol Particle Removal by Water Spray Droplets With OpenFOAM During the Fukushima Daiichi Fuel Debris Retrieval

Hui Liang

In the decommissioning of damaged Fukushima Daiichi reactors, the melted and re-solidified fuel debris in the bottom of the reactor pressure vessel and primary containment vessel need to be cut into small pieces before removing them from reactor buildings. ...

2020

Radiation detection and energy conversion in nuclear reactor environments by hybrid photovoltaic perovskites

László Forró, Endre Horvath, Andrzej Sienkiewicz, Bálint Náfrádi, Márton Kollár, Pavao Roko Andricevic

Detection and direct power conversion of high energy and high intensity ionizing radiation could be a key element in next generation nuclear reactor safety systems and space-born devices. For example, the Fukushima catastrophe in 2011 could have been large ...

Elsevier2020

Power calibration methodology at the CROCUS reactor

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari, Pavel Frajtag, Axel Guy Marie Laureau

In the present article, we detail the method used to experimentally determine the power of the CROCUS zero-power reactor, and to subsequently calibrate its ex-core monitor fission chambers. Knowledge of the reactor power is a mandatory quantity for a safe ...

E D P SCIENCES2020

Direct numerical simulation of phase change in the presence of non-condensable gases

Lubomír Bures, Yohei Sato

This paper describes a new numerical method for the simulation of phase change phenomena between a liquid and a vapour in the presence of non-condensable gases. The method is based on an interface-tracking approach in the framework of single-fluid modellin ...

2020

Effect of dynamic strain ageing on environmental degradation of fracture resistance of low-alloy RPV steels in high-temperature water environments

Philippe Spätig, Hans-Peter Seifert, Zaiqing Que

Elastic plastic fracture mechanics tests on different low-alloy reactor pressure vessel (RPV) steels in air and various simulated light water reactor environments revealed a clear, but moderate reduction of the fracture initiation resistance of RPV steels ...

2019

A coarse-mesh methodology for modelling of single-phase thermal-hydraulics of ESFR innovative assembly design

Andreas Pautz, Konstantin Mikityuk, Carlo Fiorina, Stefan Radman

The GeN-Foam multi-physics code enables coupled thermal-hydraulic, neutronic, and thermal-mechanical analysis of fast reactor cores with 3-D unstructured deformable meshes. Advances within the Horizon2020 ESFR-SMART project, as well as trends towards highe ...

ELSEVIER SCIENCE SA2019

High-Temperature Water Effects on the Fracture Behaviour of Low-Alloy Reactor Pressure Vessel Steels

Zaiqing Que

The structural integrity of the reactor pressure vessel (RPV) of light water reactors (LWR) is of utmost importance regarding operation safety and lifetime. High-temperature water (HTW) and hydrogen absorbed from environment, in synergy with irradiation em ...

EPFL2019

Design concept and thermal-structural analysis of a high power reflective mm-wave optical mirror (M2) for the ITER ECH-UL

Timothy Goodman, René Chavan, Matteo Vagnoni

Each of the 4 ITER Electron Cyclotron Heating Upper Launcher (ECHUL) features 8 transmission lines used to inject microwave power of up to 1.31 MW per line (at the FCS diamond window), into the plasma at a frequency of 170 GHz. The millimetre waves are gui ...

ELSEVIER SCIENCE SA2019

Application of causality analysis on nuclear reactor systems

Andreas Pautz, Hakim Ferroukhi, Dionysios Chionis, Abdelhamid Dokhane

Causality analysis is a substantial tool for identifying cause-and-effect links between different components of a system and has been extensively used in various areas of science such as neuroscience, climatology, and econometrics. This analysis is carried ...

American Institute of Physics2019