Publications associées à Copper conductor

Performance Comparison of Cables With Partial Transposition

Pierluigi Bruzzone, Kamil Sedlák, Federica Demattè, Chiara Frittitta

The need of full transposition of the current carrying elements (strands) in large cables is frequently retained as top design criterion for conductors operating in pulsed mode. However, when the transposition error, i.e., the inductance difference among t ...

IEEE Institute of Electrical and Electronics Engineers2024

Highly anisotropic carbon fiber electrodes for DEAs and their dynamic non-monotonic conductive properties

Yves Perriard, Stefania Maria Aliki Konstantinidi, Markus Koenigsdorff

A common method for creating compliant electrodes for dielectric elastomer actuators (DEAs) and soft sensors is to incorporate electrically conductive carbon particles into a polymer matrix. However, using unidirectional aligned carbon fibers instead not o ...

Society of Photo-Optical Instrumentation Engineers (SPIE)2024

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Farhad Rachidi-Haeri, Marcos Rubinstein

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Performance of the Cable-in-Conduit Conductors for Super-X Test Facility

Kamil Sedlák

Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pair ...

IEEE Institute of Electrical and Electronics Engineers2023

AC loss and electrical resistance of the RW3 diffusion-bonded joint

Vincenzo D'Auria

For the European DEMO fusion reactor, several options of the Toroidal Field (TF) coil design were proposed. The winding of the TF coil option 1 is based on React&Wind (RW), Nb3Sn, graded conductors in order to optimize the amount of superconductor accordin ...

2023

Experimental study of stability, quench propagation and detection methods on 15 kA sub-scale HTS fusion conductors in SULTAN

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy, Ortensia Dicuonzo

High-temperature superconductors (HTSs) enable exclusive operating conditions for fusion magnets, boosting their performance up to 20 T generated magnetic fields in the temperature range from 4 K to 20 K. One of the main technological issues of HTS conduct ...

2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Thermal-hydraulic analysis of alternative cable-in-conduit conductors for the European DEMO hybrid central solenoid

Kamil Sedlák, Nikolay Bykovskiy, Roberto Guarino

A hybrid design of the Central Solenoid is under study within the conceptual design phase of the European DEMO fusion reactor. It is based on HTS conductors in the innermost high-field layers, and Nb3Sn and NbTi conductors for field values below 15 T. Sinc ...

2022

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets. One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Resurgence of DSCs with copper electrolyte: a detailed investigation of interfacial charge dynamics with cobalt and iodine based electrolytes (vol 6, pg 22204, 2018)

Ulf Anders Hagfeldt

Correction for 'Resurgence of DSCs with copper electrolyte: a detailed investigation of interfacial charge dynamics with cobalt and iodine based electrolytes' by Sourava C. Pradhan et al., J. Mater. Chem. A, 2018, 6, 22204-22214, DOI: 10.1039/C8TA06948D. ...

Royal Society of Chemistry2022

Effect of Local Defects on HTS Fusion Magnets Performance

Local defects in the manufacturing of high temperature superconducting cable-in-conduit conductors are known to be present at different stages of the conductor production. The impact of such defects on the performance of one module of the hybrid option of ...

IEEE Institute of Electrical and Electronics Engineers2022

Interaction of lightning-generated electromagnetic fields with overhead and underground cables

Farhad Rachidi-Haeri, Marcos Rubinstein, Carlo Alberto Nucci

In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...

IET2022

Intergrade Joints for Nb3Sn cables of high magnetic field magnets

Vincenzo D'Auria

The objective of this thesis is the development of high-field and high-current joints between Nb3Sn cables for superconducting coils. The main fields of application are high energy physics (HEP) and thermonuclear fusion. In this thesis, the focus is on Win ...

EPFL2022

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Rubaiyet Iftekharul Haque, Sébastien Lani, Ryan Mitchell van Dommelen, Olivier Rémy Henry Chandran

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

Impact of mechanical and thermal cycles at different operating conditions on the ITER toroidal field coil conductor performance

Pierluigi Bruzzone, Kamil Sedlák

The impact of electromagnetic (EM) and thermal cyclic loading (referred as warm-up-cool-down-WUCD) on the Nb3Sn cable in conduit conductors for the toroidal field magnets of the ITER tokamak should be carefully assessed for the proper operation of the mach ...

2021

Novel insights into the design of stretchable electrical systems

Fabien Sorin, Pierre-Luc Eloi Piveteau, Louis Marie Philippe Martin-Monier

Soft electronics have recently gathered considerable interest because of their biomechanical compatibility. An important feature of deformable conductors is their electrical response to strain. While development of stretchable materials with high gauge fac ...

2021

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

Pierluigi Bruzzone, Mithlesh Kumar, Vincenzo D'Auria

Future high-field accelerator magnets foresee the extensive use of Nb3Sn, more expensive than the Nb-Ti of LHC. For projects involving the series production of magnets, conductor grading is mandatory in order to reduce the cost. To allow grading ...

IEEE Institute of Electrical and Electronics Engineers2021

Micro-Electrode with Fast Mass Transport for Enhancing Selectivity of Carbonaceous Products in Electrochemical CO2 Reduction

Michael Graetzel, Mingkui Wang, Jingshan Luo, Dan Ren, Xiaoyu Zhang, Qixing Zhang

During electrochemical carbon dioxide (CO2) reduction on copper electrodes in an aqueous electrolyte, one of the key challenges is the competition between hydrogen evolution and CO2 reduction, especially under large current density. Here, micro-electrodes ...

2021

Optimization Method for Extracting Stabilizer Geometry and Properties of REBCO Tapes

Francesco Grilli, Nicolo' Riva, Arooj Akbar, Bertrand Dutoit, Bertrand Dutoit

A good knowledge of material properties is a critical aspect for modeling high-temperature superconductor (HTS) devices. However, the electrical resistivity of coated conductors above the critical current is limited. The major challenge in characterizing t ...

2021