Publications associées à Finite element method in structural mechanics

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Numerical Study of the Optical Response of ITO-In2O3 Core-Shell Nanocrystals for Multispectral Electromagnetic Shielding

Michele Ghini, Nicolò Petrini

Nowadays materials to protect equipment from unwanted multispectral electromagnetic waves are needed in a broad range of applications including electronics, medical, military and aerospace. However, the shielding materials currently in use are bulky and wo ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Warping-Inclusive Kinematic Coupling in Mixed-Dimension Macro Models for Steel Wide Flange Beam Columns

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Alexander Riley Hartloper

A warping-inclusive kinematic coupling method to be used in finite-element analysis of members featuring wide-flange cross sections is proposed in this paper. This coupling method is used in mixed-dimension macromodels that combine continuum and beam-colum ...

2022

On the compressive and bond strength of reinforced concrete as structural properties

Francesco Rafael Alberto Moccia

Traditionally, the concrete strength is measured on cubes or cylinders having normalized dimensions, suitable vibration and curing conditions and their strength is assessed in laboratory under fast loading rates. However, the in-situ strength of structural ...

EPFL2021

Minimal mass design of active tensegrity structures

Yafeng Wang

Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yieldin ...

ELSEVIER SCI LTD2021

Macro Modeling Technique for Integrally-Attached Timber Plates: Sensitivity Analysis

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton

Using the Integral Mechanical Attachment (IMA) technique, a new macroscopic model has recently been introduced to simulate the structural behavior of segmented timber plates. The macro model is based on employing only beam and spring elements, which aims t ...

2021

Fast assembly of Galerkin matrices for 3D solid laminated composites using finite element and isogeometric discretizations

Pablo Antolin Sanchez

This work presents a novel methodology for speeding up the assembly of stiffness matrices for laminate composite 3D structures in the context of isogeometric and finite element discretizations. By splitting the involved terms into their in-plane and out-of ...

2020

A Computational Comparison Between Isogeometric Analysis and Spectral Element Methods: Accuracy and Spectral Properties

Alfio Quarteroni, Ondine Gabrielle Chanon

In this paper, we carry out a systematic comparison between the theoretical properties of Spectral Element Methods and NURBS-based Isogeometric Analysis in its basic form, that is in the framework of the Galerkin method, for the approximation of the Poisso ...

SPRINGER/PLENUM PUBLISHERS2020

Minimum energy adaptive structures – All-In-One problem formulation

Gennaro Senatore, Yafeng Wang

This paper presents a new All-In-One (AIO) implementation of an existing formulation to design adaptive structures through Total Energy Optimization (TEO). The method implemented in previous work is a nested optimization process, here named TEO-Nested. Num ...

2020

A Structural Design Methodology for Freeform Timber Plate Structures Using Wood-Wood Connections

Anh Chi Nguyen

Over the past decades, timber has gained popularity as a sustainable building material because of the rising environmental awareness. Furthermore, the resurgence of timber has also been encouraged by the advent of the digital age during the 21st century. T ...

EPFL2020

System and method for performing isogeometric analysis and finite element analysis using h-splines

Michaël Unser, Zsuzsanna Püspöki, Daniel Andreas Schmitter

A method for performing H-spline compatible isogeometric analysis (IGA) on a geometric object, the method being performed on a computer device having a memory, the method including the steps of creating an analysis suitable geometry (ASG) using H-splines f ...

2019

Identification of Mechanism Stiffness of Autoeliminating Clearance for Auxiliary Bearing

Yuanping Xu

In this article, a method for identification of equivalent stiffness was proposed based on a genetic algorithm by studying the stiffness characteristics of autoeliminating clearance auxiliary bearing devices (ACABDs) in static condition. Subsequently, the ...

2019

Effective Stiffness and drift capacity of modern unreinforced masonry walls

Katrin Beyer, Bastian Valentin Wilding

Code design of unreinforced masonry (URM) buildings is based on elastic analysis, which requires as input parameter the effective stiffness and the ultimate drift capacity of the in-plane force-displacement response of URM walls. Eurocode 8, for example, e ...

2018

On the benefits of a stress criterion for the simulation of cup drawing process

Roland Logé

Experimental and numerical cup drawing process has been investigated on 0.65 mm zinc sheets. The cup exhibits anisotropic earrings due to the material microstructure. The material formability is studied through elliptical bulge tests in the rolling, diagon ...

Springer France2018

The effective stiffness of modern unreinforced masonry walls

Katrin Beyer, Bastian Valentin Wilding

Code design of unreinforced masonry (URM) buildings is based on elastic anal-ysis, which requires as input parameter the effective stiffness of URM walls. Eurocode estimates the effective stiffness as 50% of the gross sectional elastic stiffness, but compa ...

2018

Low Frequency Sound Field Reconstruction in Non-rectangular Room: A Numerical Validation

Hervé Lissek, Etienne Thierry Jean-Luc Rivet, Vu Thach Pham

Characterization of sound fields in rooms has always been a challenging task. A faithful reconstruction of sound fields in rooms generally would require an impractically high number of microphones. At low frequencies, where sound field can be modeled as a ...

2018

Development of a Spring Model for the Structural Analysis of a Double-Layered Timber Plate Structure with Through-Tenon Joints

Yves Weinand, Anh Chi Nguyen

Timber plate structures with integral mechanical attachments have been successfully built in the last decades. Previous research has highlighted the influence of these connections in the global behavior of the structures. Double-layered plate shells are on ...

World Conference of Timber Engineering2018

Axially equilibrated displacement-based beam element for simulating the cyclic inelastic behaviour of RC members

Katrin Beyer, João Saraiva Esteves Pacheco de Almeida, Danilo Tarquini

Distributed plasticity beam elements are commonly used to evaluate limit state demands for performance based analysis of reinforced concrete (RC) structures. Strain limits are often preferred to drift limits since they directly relate to damage and are the ...

2017

Flexural quasi-static behaviour of UHPFRC and R-UHPFRC circular slab specimens

Eugen Brühwiler, Xiujiang Shen

This paper investigates experimentally and numerically the biaxial flexural behaviour of thin circular slab specimens made of Ultra High Performance Fibre Reinforced Cementitious Composite (UHPFRC). The circular slab specimens represent an external tensile ...

RILEM publications S.A.R.L.2017

JammJoint: A Variable Stiffness Device Based on Granular Jamming for Wearable Joint Support

Auke Ijspeert, Jamie Paik, Simon Lukas Hauser, Matthew Aaron Robertson

In robotics, controlling the stiffness of the joints that contribute to the robots’ degree of freedom dictates the adaptability, versatility, and safety of the whole system.We can achieve variable stiffness or impedance in a robotic system purely by the co ...

2017