Publications associées à Nuclear engineering

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Enhancing higher education through hybrid and flipped learning: Experiences from the GRE@T-PIONEeR project

Mathieu Hursin, Yi Zhang

GRE@T-PIONEeR is a Horizon 2020 project coordinated by Chalmers University of Technology, running over the period 2020-2024. 18 university teachers from 8 different universities located in 6 different countries gathered forces to develop and offer advanced ...

Elsevier Science Sa2024

Anisotropic In-Plane strain engineering Ni(OH)2 to activate alkaline hydrogen evolution reaction

Kangning Zhao, Chao Yang

Realizing a hydrogen economy strongly requires alkaline water electrolysis to achieve large-scale generation of H2, but lacks stable and efficient catalysts. The insufficient active sites in Ni(OH)2 impair the catalytic performance of alkaline HER. Herein, ...

ELSEVIER SCIENCE SA2023

Multi-physics modeling of VVERs with high fidelity high-resolution codes

Marianna Papadionysiou

The calculations performed for the design and operation of a Nuclear Power Plant (NPP) are a key factor for their safety analyses. The standard for the computational analysis of NPPs is the so called conventional approach, which relies on coarse mesh diffu ...

EPFL2022

On the development of multi-physics tools for nuclear reactor analysis based on OpenFOAM (R): state of the art, lessons learned and perspectives

Carlo Fiorina

In the last two decades, the use of OpenFOAM as a multi-physics library for nuclear applications has grown from a sporadic use for exploratory studies to a widespread application for the analysis of innovative reactor concepts and highly complex problems. ...

ELSEVIER SCIENCE SA2022

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

Advanced Frameworks to Aggregate and Unlock the Power Flexibility of Distributed Energy Resources Located in Active Distribution Networks

Mohsen Kalantar Neyestanaki

Environmental concerns are leading to a fast transition in electric power systems towards replacing fossil fuel and nuclear generation with renewable generation. This transition has two significant implications for electric power systems: 1-The capacity o ...

EPFL2022

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

Roland Logé, Nicola Colonna, Raffaele Esposito

The neutron time-of-flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: the Experimental Area 1 (EAR1), located 185 m horizontall ...

2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Design of the third-generation neutron spallation target for the CERN's n_TOF facility

Raffaele Esposito, Marco Calviani

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, ...

IOS PRESS2020

Comparison of Reduced-Basis techniques for the model order reduction of parametric incompressible fluid flows

Carlo Fiorina

The applicability of two Reduced-Basis techniques to parametric laminar and turbulent incompressible fluid flow problems in nuclear engineering is studied in this work. The Reduced-Basis methods are used to generate Reduced-Order Models (ROMs) that can acc ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Thermal stability of nanometric TiC-carbon composites: effects of carbon allotropes and Zr milling impurities

Paul Bowen

In the ISOL (Isotope Separator OnLine) method a target at high temperatures (up to 2300 degrees C), is bombarded with high energy protons in order to produce isotopes through nuclear reactions which are simultaneously extracted from the target, ionized and ...

2018

Thermo-mechanical analysis of an ITER ECH&CD Upper Launcher mirror

Timothy Goodman, Matteo Vagnoni, René Chavan, Avelino Mas Sanchez

The Mirror one Lower (LM1) is part of the in-vessel quasi-optical beam propagation system for the ITER Electro Cyclotron (EC) Upper Launcher (UL), where eight beams are reflected through four mirrors during its passage to the plasma. The mirrors are groupe ...

2018

Neutron emission spectroscopy of D plasmas at JET with a compact liquid scintillating neutron spectrometer

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia, Alessandro Pau, Pierre-Thomas Paul Brun, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Mikhail Maslov, Nicola Vianello, Miguel Fernández Ruiz, Federico Nespoli, Antonio José Pereira de Figueiredo, Liang Yao, Yao Zhou, David Pfefferlé, Dalziel Joseph Wilson, Robin Humphry-Baker, Davide Galassi, José Pedro Rebelo Ferreira Marques, Ana Francisca Leal Silva Soares, Jonathan Marc Philippe Faustin, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Julio Rodriguez, Hamish William Patten, Jonnathan Cesar Hidalgo Acosta, , , , , , , , ,

Evidence of Be-9 + p nuclear reactions during 2 omega(CH) and hydrogen minority ICRH in JET-ILW hydrogen and deuterium plasmas

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Pierre-Thomas Paul Brun, Alessandro Pau, Henri Weisen, Cristian Sommariva, Richard Pitts, Sun Hee Kim, Jan Horacek, Yann Camenen, Marco Wischmeier, Mikhail Maslov, Javier García Hernández, Miguel Fernández Ruiz, Nicola Vianello, Antonio José Pereira de Figueiredo, Liang Yao, Dalziel Joseph Wilson, Federico Nespoli, José Pedro Rebelo Ferreira Marques, Yao Zhou, David Pfefferlé, Ana Francisca Leal Silva Soares, Daniel Scott Alessi, Davide Galassi, Julio Rodriguez, Jonnathan Cesar Hidalgo Acosta, Jonathan Marc Philippe Faustin, Li Shuai, Pedro Camilo de Oliveira e Silva, Alberto Hernando de Castro, Hamish William Patten, , , , , ,

Bayesian Uncertainty Quantification of Physical Models in Thermal-Hydraulics System Codes

Damar Canggih Wicaksono

Nuclear thermal-hydraulics (TH) system codes use several parametrized physical or empirical models to describe complex two-phase flow phenomena. The reliability of their predictions is as such primarily affected by the uncertainty associated with the param ...

EPFL2018

Escaping alpha-particle monitor for burning plasmas

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia, Alessandro Pau, Pierre-Thomas Paul Brun, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Mikhail Maslov, Nicola Vianello, Miguel Fernández Ruiz, Federico Nespoli, Antonio José Pereira de Figueiredo, Liang Yao, Yao Zhou, David Pfefferlé, Dalziel Joseph Wilson, Robin Humphry-Baker, Davide Galassi, José Pedro Rebelo Ferreira Marques, Ana Francisca Leal Silva Soares, Jonathan Marc Philippe Faustin, Daniel Scott Alessi, Arnout Lodewijk M Beckers, Julio Rodriguez, Hamish William Patten, Jonnathan Cesar Hidalgo Acosta, Samuel Lanthaler, , , , , , , ,

Thermal-hydraulic modeling of a novel HTS CICC for nuclear fusion applications

Pierluigi Bruzzone

A thermal-hydraulic model has been developed for the novel cable-in-conduit conductor (CICC) recently proposed by ENEA, which foresees the use of 2nd Generation REBCO-based Coated Conductor tapes stacked into twisted grooves slotted into an Al core. A cent ...

IEEE Institute of Electrical and Electronics Engineers2016

Hierarchical Model Predictive Control in Fusion Reactors

Stefano Coda, Jean-Marc Moret, Hoang Bao Le

Nuclear fusion still has to pass several milestones on its way to successful energy production, one of them being successful plasma stabilization. The present article presents an innovative control implementation related to plasma control for the generatio ...

Ieee2016

Probing nuclear rates with Planck and BICEP2

Julien Lesgourgues

Big-bang nucleosynthesis (BBN) relates key cosmological parameters to the primordial abundance of light elements. In this paper, we point out that the recent observations of cosmic microwave background anisotropies by the Planck satellite and by the BICEP2 ...

American Physical Society2014