Publications associées à Rendement (physique)

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

EPFL2024

The effect of nacelle-to-rotor size on the wake of a miniature wind turbine

Fernando Porté Agel, Arslan Salim Dar, Rim Majzoub

Wind tunnel experiments are performed to investigate the effect of nacelle-to-rotor size on the wake of a wind turbine under different Reynolds numbers. Four different turbine configurations are tested, which vary in the rotor diameter and nacelle length a ...

IOP Science2024

Performance of energy piles foundation in hot-dominated climate: A case study in Dubai

Lyesse Laloui, Elena Ravera, Sofie Elaine ten Bosch

Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...

Pergamon-Elsevier Science Ltd2024

Comparison of reduced model predictions for divertor detachment onset and reattachment timescales in ASDEX Upgrade and JET experiments

Holger Reimerdes, Haomin Sun

Building on prior analysis of ASDEX Upgrade (AUG) experiments (Henderson et al 2023 Nucl. Fusion 63 086024), this study compares simple analytical formula predictions for divertor detachment onset and reattachment timescales in JET experiments. Detachment ...

IOP Publishing Ltd2024

Phase-stable indium sulfide achieves an energy conversion efficiency of 14.3% for solar-assisted carbon dioxide reduction to formate

Michael Graetzel, Jing Gao, Jingshan Luo, Xiaoyu Zhang, Jun Li, Qixing Zhang

Tremendous efforts have been made in developing highly selective catalysts for electrochemical CO 2 conversion to formate. However, the rapid deactivation resulting from structural reconstruction and phase transition poses considerable challenges to the sy ...

Cell Press2024

Shortwave Infrared-Sensitive, Narrowband Organic Upconversion Devices with a Gain

Wei-Hsu Hu

Sensing and imaging of light in the shortwave infrared (SWIR) range is increasingly used in various fields, including bio-imaging, remote sensing, and semiconductor process control. SWIR-sensitive organic photodetectors (OPDs) are promising because organic ...

EPFL2024

Soliton gas: Theory, numerics, and experiments

The concept of soliton gas was introduced in 1971 by Zakharov as an infinite collection of weakly interacting solitons in the framework of Korteweg-de Vries (KdV) equation. In this theoretical construction of a diluted (rarefied) soliton gas, solitons with ...

Amer Physical Soc2024

Study of flexible operating conditions in variable-speed hydraulic turbines : advanced models and experimental validation

Martin Seydoux

The global imperative to transition from fossil fuel-based energy sources to renewable alternatives has become increasingly urgent in the pursuit of sustainable and renewable power generation. This paradigm shift necessitates innovative approaches to manag ...

EPFL2024

Nanocrystalline Flash Annealed Nickel Oxide for Large Area Perovskite Solar Cells

Michael Graetzel, Jovana Milic, Felix Thomas Eickemeyer

The industrialization of perovskite solar cells requires adequate materials and processes to make them economically viable and environmentally sustainable. Despite promising results in terms of power conversion efficiency and operational stability, several ...

WILEY2023

Role of Ionic Liquids in Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Yong Ding, Bin Ding, Xianfu Zhang

Although the power conversion efficiency of perovskite solar cells (PSCs) has reached 25.7%, there is still great potential for improvement in their performance and stability. In the past few years, ionic liquids (ILs) have been extensively investigated an ...

WILEY-V C H VERLAG GMBH2023

High-efficiency non-ablative UV laser nano-scale processing of fused silica by stable filamentation

Yves Bellouard, Olivier Bernard, Benedikt Hermann, Luca Muscarella

Over the last decades, three-dimensional micro-manufacturing of fused silica via near-infrared ultrafast laser exposure combined with an etching step has become an established technique for producing complex three-dimensional components. Here, we explore t ...

2023

Exploring brain-inspired multi-core heterogeneous hardware templates for low-power biomedical embedded systems

Benoît Walter Denkinger

The miniaturization of integrated circuits (ICs) and their higher performance and energy efficiency, combined with new machine learning algorithms and applications, have paved the way to intelligent, interconnected edge devices. In the medical domain, they ...

EPFL2023

Comparative techno-economic and energy analyses of integrated biorefinery processes of furfural and 5-hydroxymethylfurfural from biomass residue

François Maréchal

For efficient feedstock and energy utilization, integrated biorefinery processes are applied to furfural production from bagasse to convert furfural residue into 5-hydroxymethylfurfural (HMF)-an important intermediate building block for the production of v ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Readiness evaluation of SOFC-MGT hybrid systems with carbon capture for distributed combined heat and power

Jan Van Herle, Jürg Alexander Schiffmann, Victoria Xu Hong He, Michele Gaffuri

The aggravation of climate change calls for the timely development and implementation of highly efficient, renewable, zero- or negative-emission energy solutions with high technological readiness and feasibility levels. Solid oxide fuel cells (SOFC) consti ...

Elsevier2023

Interface connection of functionalized carbon nanotubes for efficient and stable perovskite solar cells

Mohammad Khaja Nazeeruddin, Jianxing Xia, Ruiyuan Hu

The ionic defects of hetero-junction interfaces always attract and trap carriers via surface electrostatic forces, which are crucial for the efficiency and intrinsic stability of perovskite solar cells (PSCs). Herein, functionalized carbon nanotubes (CNTs) ...

Royal Society of Chemistry2023

Ion-Dipole Interaction Enabling Highly Efficient CsPbI3 Perovskite Indoor Photovoltaics

Michael Graetzel, Shaik Mohammed Zakeeruddin, Jie Chen, Haizhou Lu, Xiaoyan Wang, Di Zhang, Ziyun Wang, Meng Li, Xingyu Gao

Metal halide perovskites are ideal candidates for indoor photovoltaics (IPVs) because of their easy-to-adjust bandgaps, which can be designed to cover the spectrum of any artificial light source. However, the serious non-radiative carrier recombination und ...

Wiley-V C H Verlag Gmbh2023

Bayesian Optimization for Chemical Reactions

Philippe Schwaller, Jeff Guo, Bojana Rankovic

Reaction optimization is challenging and traditionally delegated to domain experts who iteratively pro-pose increasingly optimal experiments. Problematically, the reaction landscape is complex and often requires hundreds of experiments to reach convergence ...

Swiss Chemical Soc2023

Green Cryptography and Other Optimisations

Andrea Felice Caforio

The spectral decomposition of cryptography into its life-giving components yields an interlaced network of tangential and orthogonal disciplines that are nonetheless invariably grounded by the same denominator: their implementation on commodity computing p ...

EPFL2023

Experimental study of the hydrodynamic and thermal performances of ventilated wall structures

Dolaana Khovalyg, Mohammad Rahiminejad

The presence of a ventilated air gap behind the external cladding in a building envelope is known to have a tangible contribution to the overall performance of the wall assembly. In the present study, the hydrodynamic and thermal performances of ventilated ...

2023

Integrated Backward Second-Harmonic Generation through Optically Induced Quasi-Phase-Matching

Camille Sophie Brès, Jianqi Hu, Ozan Yakar, Edgars Nitiss

Quasi-phase-matching for efficient backward second-harmonic generation requires sub-μm poling periods, a nontrivial fabrication feat. For the first time, we report integrated first-order quasiphase-matched backward second-harmonic generation enabled by see ...

2023