Publications associées à Neutron radiation

DEMO toroidal field coil fast discharge unit integration studies

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

Matteo Vallar

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...

IOP Publishing Ltd2024

Single-Photon Avalanche Diode Image Sensors for Harsh Radiation Environments

Ming-Lo Wu

The space industry has experienced substantial growth in recent years, leading to rapid advancements in space exploration and space-based technologies. Consequently, the study of electronics and sensor performance in extreme environments has become crucial ...

EPFL2024

High brightness neutron source optimized for very high pulsed magnetic field experiments

Mina Akhyani

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

Gamma-Blind Fast Neutron Detection for Spent Nuclear Fuel Characterization

Alexander Wolfertz

In this thesis, the development and testing of a system for measuring the axial distribution of fast neutron emission of spent nuclear fuel rods is presented. Emphasis is placed on the novel fast neutron detector used which can reliably work in extremely h ...

EPFL2023

Vacancy segregation and intrinsic coordination defects at (111) twist grain boundaries in diamond

Carolina Baruffi, Christian Brandl

High radiation damage resistance has become increasingly important for applications of functional materials in harsh environments. The high radiation damage resistance diamond cubic carbon is a unique material which is considered for radiation environments ...

Pergamon-Elsevier Science Ltd2023

Regressive Tomography and Direct Regressive Reconstruction: A Research Note

Henri Weisen

Two related methods for inverting line-integrated measurements are presented in this research paper in the context of the recent deuterium-tritium experiments in the JET tokamak. Unlike traditional methods of tomography, these methods rely on making use of ...

2023

Evaluation of neutron dose rates at the TCV tokamak facility

Patrick Blanchard, Henri Weisen, Matteo Vallar

A detailed MCNP neutronics model of the building housing the TCV tokamak has been developed. Predicted dose rates have been compared to neutron dose measurements at 12 locations in the building obtained during neutral beam injection into TCV plasmas. This ...

2023

HighNESS conceptual design report: Volume II. The NNBAR experiment

Mina Akhyani, Xiaoxue Han, Davide Campi, Sheng Xu

A key aim of the HighNESS project for the European Spallation Source is to enable cutting-edge particle physics experiments. This volume presents a conceptual design report for the NNBAR experiment. NNBAR would exploit a new cold lower moderator to make th ...

Ios Press2023

High-Resolution Photoemission Study of Neutron-Induced Defects in Amorphous Hydrogenated Silicon Devices

Sylvain Dunand, Nicolas Würsch, Matthew James Large, Giulia Rossi

In this paper, by means of high-resolution photoemission, soft X-ray absorption and atomic force microscopy, we investigate, for the first time, the mechanisms of damaging, induced by neutron source, and recovering (after annealing) of p-i-n detector devic ...

MDPI2022

Investigation and Validation of Unstructured Mesh Methodologies for Modeling Experimental Reactors

Andreas Pautz, Mathieu Hursin, Carlo Fiorina, Tom Mager

This paper summarizes a methodology developed at Ecole Polytechnique Federale de Lausanne for the neutronic modeling of the CROCUS experimental reactor and proposes solutions to the challenges one may face while modeling a research reactor with a complex g ...

MDPI2022

Neutronics Analyses of EU DEMO 2020 EC Port Configuration

Minh Quang Tran, René Chavan

The DEMOnstration fusion power plant (DEMO) is being developed within EUROfusion and one of the challenges is the integration of all the systems into a fusion reactor by designs that meet strict design criteria required for safe and reliable long-term reac ...

NUCLEAR SOCIETY SLOVENIA2021

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Experimental validation of an integrated modelling approach to neutron emission studies at JET

Henri Weisen

An integrated modelling methodology for the calculation of realistic plasma neutron sources for the JET tokamak has been developed. The computational chain comprises TRANSP plasma transport and DRESS neutron spectrum calculations, and their coupling to the ...

IOP Publishing Ltd2021

First observation of spalling in tantalum at high temperatures induced by high energy proton beam impacts

Philippe Spätig, Elvis Fornasiere, Marco Calviani

Spalling in tantalum has been observed in an experiment aiming at testing an antiproton production target prototype at CERN’s HiRadMat Facility. The experiment consisted in impacting 47 intense and high-energy proton beams onto a target equipped with ten c ...

2020

Sawtooth control with modulated ICRH in JET-ILW H-mode plasmas

Jonathan Graves

Sawtooth pacing with modulated ion-cyclotron resonance heating (ICRH) has been demonstrated to be very efficient in JET-ILW L-mode plasmas (Lerche et al 2017 Nucl. Fusion 57 036027, Lennholm et al 2017 Fusion Eng. Des. 123 535-40), where the main heat sour ...

IOP Publishing Ltd2020

Improved neutron activation dosimetry for fusion

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Semin Kwak, Alessandro Pau, Cristian Sommariva, Henri Weisen, Richard Pitts, Sun Hee Kim, Yann Camenen, Jan Horacek, Javier García Hernández, Federico Nespoli, Marco Wischmeier, David Pfefferlé, Hamish William Patten, Nicola Vianello, Mikhail Maslov, Samuel Lanthaler, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Jonathan Marc Philippe Faustin, Liang Yao, Dalziel Joseph Wilson, Bernhard Sieglin, Otto Asunta

Neutron activation technique has been widely used for the monitoring of neutron fluence at the Joint European Torus (JET) whereas it is foreseen to be employed at future fusion plants, such as ITER and DEMO. Neutron activation provides a robust tool for th ...

2019

Novel method for determination of tritium depth profiles in metallic samples

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Henri Weisen, Alessandro Pau, David Pfefferlé, Cristian Sommariva, Jonathan Marc Philippe Faustin, Richard Pitts, Hamish William Patten, Yann Camenen, Samuel Lanthaler, Jan Horacek, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Federico Nespoli, Yao Zhou, Davide Galassi, Antonio José Pereira de Figueiredo, Liang Yao, Dalziel Joseph Wilson, Bernhard Sieglin, Otto Asunta

Tritium accumulation in fusion reactor materials is considered a serious radiological issue, therefore a lot of effort has been concentrated on the development of radiometric techniques. A novel method, based on gradual dissolution, for the determination o ...

IOP Publishing Ltd2019

Initial port integration concept for EC and NB systems in EU DEMO tokamak

Minh Quang Tran

The integration of the heating and current drive (HCD) systems in the EU DEMO tokamak must address a number of issues, namely space constraints in the tokamak building, remote handling requirements, breeding blanket penetration, neutron and photon radiatio ...

2019

Helium effects on irradiation assisted stress corrosion cracking susceptibility of 316L austenitic stainless steel

Ignasi Villacampa Roses

The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...

EPFL2018