Publications associées à Étalement de spectre

Validation of short-pulse reflectometry turbulence measurements with a synthetic diagnostic

Stefano Coda, Stephan Brunner, Oleg Krutkin, Umesh Kumar, Mackenzie Peter-Fulford Van Rossem, Samuele Mazzi

Experimental measurements of the turbulence amplitude utilizing a short pulse reflectometry method are presented. Two discharges with shaped plasma possessing opposite signs of triangularity are considered and a higher turbulence amplitude is found in the ...

IOP Publishing Ltd2024

A 0.14-nJ/b 200-Mb/s 2.7-3.5-GHz Quasi-Balanced FSK Transceiver With PLL-Based Modulation and Sideband Energy Detection

Cong Ding, Bowen Wang

This paper describes a balanced frequency shift keying (FSK) modulation, namely quasi-balanced FSK (QB-FSK), for energy-efficient high-data-rate communication. Not suffering from data-pattern dependency, the proposed modulation method enables frequency mod ...

2024

Chaotic microcomb-based parallel ranging

Tobias Kippenberg, Aleksandr Tusnin, Junqiu Liu, Anton Lukashchuk

The intrinsic random amplitude and phase modulation of 40 distinct lines of a microresonator frequency comb operated in the modulation instability regime are used to realize massively parallel random-modulation continuous-wave light detection and ranging, ...

Nature Publishing Group2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

Disentangling 1/f noise from confined ion dynamics

Théo Denis Tobias Emmerich

Ion transport through biological and solid-state nanochannels is known to be a highly noisy process. The power spectrum of current fluctuations is empirically known to scale like the inverse of frequency, following the long-standing yet poorly understood H ...

ROYAL SOC CHEMISTRY2023

Development of algorithms for the end-end system simulation and performance analysis for a high-frequency magnetic diagnostic system: Application to ITER, JET and TCV

Duccio Testa

An innovative and very detailed end-to-end system modelling tool has been developed and applied to test on simulated data the actual measurement capabilities of any generic high frequency (HF) magnetic diagnostic systems. The main goal of this rather compl ...

2022

Effects of resonator geometry and substrate stiffness on the tunability of a deformable microwave metasurface

Romain Christophe Rémy Fleury, Rayehe Karimi Mahabadi, Taha Goudarzi

Tunable metasurfaces can shift their resonant frequency through different approaches, one of which is applying mechanical deformations. Here, we show the effects of two key factors on the tunability of deformable metasurfaces; the resonator geometry and su ...

2022

Time-resolved physical spectrum in cavity quantum electrodynamics

Alexey Lyasota

The time-resolved physical spectrum of luminescence is theoretically studied for a standard cavity quantum electrodynamics system. In contrast to the power spectrum for the steady state, the correlation functions up to the present time are crucial for the ...

AMER PHYSICAL SOC2022

The kinectome: A comprehensive kinematic map of human motion in health and disease

Enrico Amico, Antonella Romano, Emahnuel Troisi Lopez

Human voluntary movement stems from the coordinated activations in space and time of many musculoskeletal segments. However, the current methodological approaches to study human movement are still limited to the evaluation of the synergies among a few body ...

WILEY2022

Emittance growth suppression with a multibunch feedback in high-energy hadron colliders: Numerical optimization of the gain and bandwidth

Xavier Buffat, Sondre Vik Furuseth

A transverse feedback system can effectively mitigate the emittance growth caused by injection oscillations and machine noise in hadron beams. However, as its action on the beam depends on beam position measurements of finite accuracy, it introduces additi ...

2021

Optical frequency comb based parallel fm lidar

Tobias Kippenberg, Anton Lukashchuk

In a LIDAR device (100) a laser light source (110) generates first laser light having a first laser frequency which is frequency modulated with a first frequency modulation. A non-linear optical element (120) receives the first laser light and generates th ...

2021

Localization of Electromagnetic Interference Source Using a Time Reversal Cavity: Application of the Maximum Power Criterion

Marcos Rubinstein, Mohammad Azadifar, Farhad Rachidi-Haeri, Amirhossein Mostajabi, Hamidreza Karami

The localization of Electromagnetic Interference (EMI) sources is very important in Electromagnetic Compatibility applications. Recently, a novel localization technique based on the Time Reversal Cavity (TRC) concept was proposed using only one sensor. In ...

IEEE2020

On the Error Rate of the LoRa Modulation With Interference

Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Orion Afisiadis, Matthieu Cotting

LoRa is a chirp spread-spectrum modulation developed for the Internet of Things (IoT). In this work, we examine the performance of LoRa in the presence of both additive white Gaussian noise and interference from another LoRa user. To this end, we extend an ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020

Weight Erosion: An Update Aggregation Scheme for Personalized Collaborative Machine Learning

Martin Jaggi, Mary-Anne Hartley, Sai Praneeth Reddy Karimireddy, Felix Hans Michel Grimberg

Background. In medicine and other applications, the copying and sharing of data is impractical for a range of well-considered reasons. With federated learning (FL) techniques, machine learning models can be trained on data spread across several locations w ...

Springer, Cham2020

A Vibrational Technique for in vitro Intraoperative Prosthesis Fixation Monitoring

Kamiar Aminian, Hooman Dejnabadi, Seyed Abdolmajid Yousefsani

Objective: In this paper, a new vibrational modal analysis technique was developed for intraoperative cementless prosthesis fixation evaluation upon hammering. Methods: An artificial bone (Sawbones)-prosthesis system was excited by sweeping of a sine signa ...

2020

Vibration tests on interconnected timber elements using wood-wood connections

Yves Weinand, Julien Gamerro, Jean-François Bocquet

Vibration tests were performed on 3 large-scale timber slabs using wood-wood connections with a span of 8.1 meters. 10 impulsive vibration tests per specimen were performed to estimate the initial natural frequency. Vibrations were triggered using a hammer ...

2019

Lora Digital Receiver Analysis And Implementation

Andreas Peter Burg, Orion Afisiadis, Reza Ghanaatian Jahromi, Matthieu Cotting

Low power wide area network technologies (LPWANs) are attracting attention because they fulfill the need for long range low power communication for the Internet of Things. LoRa is one of the proprietary LPWAN physical layer (PHY) technologies, which provid ...

IEEE2019

Brain networks and their relevance for stroke rehabilitation

Friedhelm Christoph Hummel, Philipp Johannes Koch

Stroke has long been regarded as focal disease with circumscribed damage leading to neurological deficits. However, advances in methods for assessing the human brain and in statistics have enabled new tools for the examination of the consequences of stroke ...

2019

Generalized Poisson Summation Formulas for Continuous Functions of Polynomial Growth

Michaël Unser, John Paul Ward, Quy Ha Nguyen

The Poisson summation formula (PSF) describes the equivalence between the sampling of an analog signal and the periodization of its frequency spectrum. In engineering textbooks, the PSF is usually stated formally without explicit conditions on the signal f ...

2017

Acoustic emission source detection and wave generation on a working plate using piezoelectric actuators

Xinchang Liu

In modern automated assembly lines, part feeders play an important role to separate and sort parts. Agility and flexibility are required to achieve a good yield for different types of parts. The common working principle is to vibrate a working plate driven ...

EPFL2017