Publications associées à Alimentation sans interruption

Stability Analysis of Second-Order Harmonic Active Filters for Input-Series/Output- Parallel Solid State Transformers

Drazen Dujic, Andrea Cervone, Tianyu Wei

Solid-State Transformers with Input-Series/Output- Parallel configuration offer a convenient solution for AC/DC power conversion, thanks to their modularity, scalability and flexibility. However, as known, they are affected by a second-order harmonic rippl ...

2024

A modular multiple frequency inductive link to wirelessly power multiple miniaturized implants

Sandro Carrara, Diego Ghezzi, Gian Luca Barbruni

A modular multiple frequency coils inductive link system to wirelessly provide power for at least a medical implant at an output of a receiving coil, whereby the receiving coil is configured to be implanted in an organism. The modular multiple frequency co ...

2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Power performance of a model floating wind turbine subjected to cyclic pitch motion: A wind tunnel study

Fernando Porté Agel, Guiyue Duan, Daniele Gattari

Wind tunnel experiments were performed with a miniature floating wind turbine model to study the effects of cyclic pitch motion on its power performance. The cyclic pitch motion was prescribed by two key parameters: pitch frequency and amplitude. The power ...

IOPscience2024

Unified Harmonic Power-Flow and Stability Analysis of Power Grids with Converter-Interfaced Distributed Energy Resources

Johanna Kristin Maria Becker

Modern power distribution systems are experiencing a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). Their presence complicates the analysis and mitigation of harmonics, whose creation and propagation may be amplified ...

EPFL2024

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

First characterization of the SPIDER beam AC component with the Beamlet Current Monitor

SPIDER is the full scale prototype for the ITER Heating Neutral Beam source, hosted at the Neutral Beam Test Facility in Padova, Italy. The behavior of the beam must be thoroughly investigated to bring the machine's performance in line with ITER's requirem ...

2023

Ageing-aware battery discharge prediction with deep learning

Olga Fink, Luca Biggio

Electrochemical batteries are ubiquitous devices in our society. When employed in mission-critical applications, the ability to precisely predict their end-of-discharge under highly variable operating conditions is of paramount importance in order to suppo ...

ELSEVIER SCI LTD2023

Low-loss contacts on textured substrates for inverted perovskite solar cells

Shaik Mohammed Zakeeruddin, Felix Thomas Eickemeyer, Mingkui Wang, Mingyang Wei

Inverted perovskite solar cells (PSCs) promise enhanced operating stability compared to their normal-structure counterparts. To improve efficiency further, it is crucial to combine effective light management with low interfacial losses. Here we develop a c ...

Zenodo2023

DC Transformer Impact on Voltage Dynamics in Hybrid AC-DC Power Distribution Networks

Drazen Dujic, Andrea Cervone, Jules Christian Georges Macé, Max Dupont, Renan Pillon Barcelos

AC/DC power distribution networks use various types of power converters to interconnect their buses, active front ends between AC and DC buses, and DC transformers between DC buses. Different active front end control methods, like voltage or power regulati ...

VDE Verlag2023

Digital One-Shot Charge-balancing Method for Implantable Current-Mode Electrical Stimulation

Alexandre Schmid, Keyvan Farhang Razi

A low-power digital charge balancing system, which ensures the safe operation of constant-current biphasic stimulation is presented. The concept of the proposed charge-balancing technique is to utilize a hybrid method consisting of anodic pulse modulation ...

IEEE2023

Low-loss contacts on textured substrates for inverted perovskite solar cells

Shaik Mohammed Zakeeruddin, Mingyang Wei, Ursula Röthlisberger, Felix Thomas Eickemeyer, Virginia Carnevali, Nikolaos Lempesis, Lorenzo Agosta

Inverted perovskite solar cells (PSCs) promise enhanced operating stability compared to their normal-structure counterparts1–3. To improve efficiency further, it is crucial to combine effective light management with low interfacial losses4,5. Here we devel ...

2023

Intelligent RF System for Ultra Low Power Spectrum Sensing with Machine Learning

Naci Pekçokgüler

The crowdedness of the RF spectrum constitutes problems in communication, however it also accommodates large amount of useful information. This information can be used to determine existing signals and operating contexts. However, spectrum condition varies ...

EPFL2024

Highly Efficient Miniaturized Magnetorheological Valves Using Electropermanent Magnets

Yves Perriard, Christian Köchli, Sofia Lydia Ntella, Adrien Jean-Michel Thabuis, Kenny Jeanmonod, Bhawnath Tiwari

Fluidic systems enable actuation in various applications, such as automotive, medical, and industrial robotics. Miniaturized valves constitute a fundamental controlling element of modern fluidic systems, intriguing the interest of many researchers. This le ...

2023

Design and experimental investigation of a herringbone grooved gas bearing supported turbocharger

Jürg Alexander Schiffmann, Wanhui Liu

The design of an oil free turbocharger supported on herringbone grooved gas bearing was formulated as a multi-objective problem, which was solved by coupling a reduced order parametric model for gas bearing supported rotors with an evolutionary algorithm. ...

2023

Homogenous power distribution along gyrotron collector walls

Stefano Alberti, Jean-Philippe Hogge, Damien Fasel, Ugo Siravo, Jérémie Dubray, Miguel Filipe Silva Füglister, Pierre-François Isoz

EC RF power sources will play a major role in the future operation of large scale tokamaks (ITER, DEMO). A 1MW/170GHz gyrotron is the standard RF power unit considered for ITER. Even though the efficiency of such devices has been significantly increased th ...

2023

Low-noise high-dynamic-range single-photon avalanche diodes with integrated PQAR circuit in a standard 55 nm BCD

Edoardo Charbon, Claudio Bruschini, Ekin Kizilkan, Pouyan Keshavarzian, Francesco Gramuglia, Myung Jae Lee

Single-photon avalanche diode (SPAD) based sensors and systems enable a variety of applications in biomedical, automotive, consumer, and security domains. While several established standard technologies, which can facilitate the design of SPAD-based system ...

SPIE-INT SOC OPTICAL ENGINEERING2022

Inductive Power Transfer System for Auxiliary Power Supply in Medium Voltage Converters

Drazen Dujic, Chengmin Li, Xiaotong Du

Inductive power transfer technology is an attractive solution for medium voltage applications by eliminating the need for high voltage cables or wired connections in general. This paper introduces an inductive power transfer system which has multiple indep ...

2022

Grid-Aware Real-Time Control of Electric Vehicles

Roman Rudnik

Electric vehicles (EVs) are already part of today's reality and their number is expected to grow rapidly in the near future. A large-scale penetration of EVs will increase the power consumption during charging periods. Hence, the uncoordinated and random c ...

EPFL2022

Multiobjective Vector Modulation for Improved Control of NPC-Based Multi-Source Inverters in Hybrid Traction Systems

Andrea Cervone

The concept of a multi-source inverter (MSI) based on NPC topology was recently introduced for hybrid-electric powertrains to connect several dc sources to the traction load in a single conversion stage without magnetics. This work proposes a new modulatio ...

2022