Publications associées à Cycle combiné

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

EPFL2024

Disruption avoidance and investigation of the H-Mode density limit in ASDEX Upgrade

Alessandro Pau, Federico Alberto Alfredo Felici, Bernhard Sieglin

In recent years a strong effort has been made to investigate disruption avoidance schemes in order to aid the development of integrated operational scenarios for ITER. Within the EUROfusion programme the disruptive H-mode density limit (HDL) has been studi ...

Iop Publishing Ltd2024

Comparative Exergy and Economic Assessment of Fossil and Biomass-Based Routes for Ammonia Production

François Maréchal, Daniel Alexander Florez Orrego

Due to the increasing concerns about the marked dependence on fossil resources and their intrinsic economic uncertainty, as well as motivated by more stringent environmental regulations, the pursuit of alternative energy resources for the synthetic fertili ...

Silesian University of Technology2023

Comparative techno-economic and energy analyses of integrated biorefinery processes of furfural and 5-hydroxymethylfurfural from biomass residue

François Maréchal

For efficient feedstock and energy utilization, integrated biorefinery processes are applied to furfural production from bagasse to convert furfural residue into 5-hydroxymethylfurfural (HMF)-an important intermediate building block for the production of v ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Process modeling and integration of hydrogen and synthetic natural gas production in a kraft pulp mill via black liquor gasification

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The black liquor gasification integrated to chemical plants has shown potential for reducing the process irreversibility and promoting the decarbonization of this industrial sector. In the integrated chemical plants proposed in this work, the purpose is co ...

Pergamon-Elsevier Science Ltd2023

Alternative energy supply approach for industrial complexes and district heating networks based on biomass integrated gasification

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

In this work, a systematic approach combining different energy solutions and the time-varying energy demands is used to identify the operating conditions and arrangements for industrial complexes. A kraft pulp mill integrated to an urban district heating n ...

Universidad de Las Palmas de Gran Canaria2023

Aging investigation of the latest standard dual power modules using improved interconnect technologies by power cycling test

Yi Zhang, Rui Wu

The latest standard "New Dual" power module has been developed for both silicon and silicon-carbide devices to meet the increasing demands in high reliability and high temperature power electronic applications. Due to the new package is just starting to re ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Modeling and assessment of high-temperature photo-electrochemical devices

Ronald Ramiro Gutierrez Perez

In this thesis, the feasibility and performance of photo-driven electrochemical (PEC) devices working at elevated temperatures (T>700 K) is investigated and modeled. In such high-temperature PEC devices, a part of the solar spectrum is used for generating ...

EPFL2022

Techno-economic and environmental analysis of methanol and dimethyl ether production from syngas in a kraft pulp process

François Maréchal, Daniel Alexander Florez Orrego

The conventional configuration of a pulp mill, in which black liquor is concentrated and burnt, is compared to the upgrading gasification routes for methanol (MeOH) or dimethyl ether (DME) co-production. To this end, various exergy-based and environmental ...

PERGAMON-ELSEVIER SCIENCE LTD2022

A novel control strategy with an anode variable geometry ejector for a SOFC-GT hybrid system

Jinzhi Lu, Jinwei Chen

A novel control strategy was developed with an anode variable geometry ejector for a solid oxide fuel cell-gas turbine (SOFC-GT) system. The anode inlet temperature was controlled by combining two modes to achieve a greater controllable range: anode variab ...

PERGAMON-ELSEVIER SCIENCE LTD2022

A note on universal inference

Anthony Christopher Davison, Timmy Rong Tian Tse

Universal inference enables the construction of confidence intervals and tests without regularity conditions by splitting the data into two parts and appealing to Markov's inequality. Previous investigations have shown that the cost of this generality is a ...

WILEY2022

Precipitation, Characterization, Kinetic, and Thermodynamic Modelling of Synthetic C-S-H Systems (C-S-H, CASH, CSH+$)

Maya Nicole Harris

This thesis investigates the effects of aluminates, sulfates, and heterogeneous substrates on the nucleation and growth of synthetic calcium-silicate-hydrates (C-S-H) produced by dropwise precipitation. The use of synthetic C-S-H, separate from other cemen ...

EPFL2022

Techno-Economic Optimization of an Integrated Biomass Waste Gasifier–Solid Oxide Fuel Cell Plant

François Maréchal, Jan Van Herle, Jürg Alexander Schiffmann, Victoria Xu Hong He, Arata Nakajo, Maria del Mar Perez Fortes

With a growing energy demand in a carbon-constrained society, fuels cells powered by renewable fuels, and specifically solid waste, are seen as interesting contributors to the energy portfolio. The alternative energy industry needs to reduce costs, enhance ...

2021

Performance Analysis of Ammonia in Solid Oxide Fuel Cells

Jan Van Herle, Suhas Nuggehalli Sampathkumar, Peter Hugh Middleton, Steve Joris

Ammonia (NH3) has 17.8 wt% hydrogen and is easily liquified at 25°C and 8 bar pressure. Ammonia is carbon-free and can be produced sustainably at large scale and low cost. Solid oxide fuel cells generate electricity with efficiencies greater than 60% and c ...

ECS2021

A study on synergies of combined pulp and fuel production

François Maréchal, Julia Granacher, Tuong-Van Nguyen, Erina Clare Mcdonald

To limit climate change by reducing global greenhouse gas emissions, a transition away from fossil fuels is required. Biofuels represent a promising low carbon alternative for sectors that are hard to electrify, such as aviation. The integration of bio ref ...

2021

Electric vehicle charging station using fuel cell technology: Two different scenarios and thermodynamic analysis

Jan Van Herle, Martin Daniel Gay, Hossein Pourrahmani

This study evaluates two different scenarios of an integrated system to generate electricity for a charging station using proton exchange membrane fuel cell (PEMFC) and solid oxide fuel cell (SOFC). To improve the efficiency, the exhaust heat of these two ...

ELSEVIER2021

Experimental investigation and analysis of sequential jet impingement concepts for enhanced turbine cooling

Michele Gaffuri

With the future decarbonization of the electricity production, gas turbines will be an important tool for the stabilization of the electricity grid by meeting the peak of energy demand using zero-carbon fuels like synthetic gas and hydrogen. The combustion ...

EPFL2021

Enhancing the operational flexibility of thermal power plants by coupling high-temperature power-to-gas

François Maréchal, Jan Van Herle, Ligang Wang, Yang Sun

The increasing penetration of intermittent renewable power challenges the stability of the electrical grid, thus coal power plants are usually required to extend the operation range by reducing the minimum load. This work proposes a concept of coupling sol ...

ELSEVIER SCI LTD2020

Combined exergy analysis, energy integration and optimization of syngas and ammonia production plants: A cogeneration and syngas purification perspective

François Maréchal, Daniel Alexander Florez Orrego, Shivom Sharma

Modern ammonia production plants are equipped with efficient energy integration networks able to recover an important fraction of the waste heat exergy available throughout the chemical system. However, in order to drive the endothermic reforming reactions ...

ELSEVIER SCI LTD2020

Small-scale organic Rankine cycle turbo-generator for waste heat recovery on truck engine

Kévin Rosset

Truck engine waste heat recovery (WHR) systems have been investigated for many years. Among them, organic Rankine cycle (ORC) systems show the highest potential, but still lack efficient small-scale expansion devices, in practice. Proposed expanders are of ...

EPFL2020