Publications associées à Silicone

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Characteristic rupture height of the mediating air film beneath an impacting drop on atomically smooth mica

John Martin Kolinski, Ramin Kaviani

Before a droplet can contact a surface during impact, it must first displace the air beneath it. Over a wide range of impact velocities, the droplet first squeezes the air into a thin film, enhancing its resistance to drainage; this slows the progress of t ...

Amer Physical Soc2023

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim, Ryan Mitchell van Dommelen

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

Quantification of the Phenomena Affecting Reflective Arterial Photoplethysmography

Nikolaos Stergiopoulos, Georgios Rovas, Vasiliki Bikia

Photoplethysmography (PPG) is a widely emerging method to assess vascular health in humans. The origins of the signal of reflective PPG on peripheral arteries have not been thoroughly investigated. We aimed to identify and quantify the optical and biomecha ...

MDPI2023

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

Véronique Michaud, Valentin Rougier

The development of reusable fire-safe polymers with a prolonged lifetime heralds the switch for a transition towards circular economy. In this framework, we report a novel phosphonated thermoset which is composed of networked phosphonate esters containing ...

ELSEVIER SCIENCE SA2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

High Permittivity Siloxanes as Promising Materials for Dielectric Elastomer Transducers: From Synthesis to Application

Yauhen Sheima

The speed of change in the modern world is impressive. Within the last 50 years, many devices and technologies have significantly transformed their appearance, intrinsic characteristics and improved their performance. Computers have changed from the size o ...

EPFL2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Peeling in electroadhesion soft grippers

Herbert Shea, Vito Cacucciolo

Electroadhesion endows robots with super-human abilities: mechanical geckoes that climb vertical walls and soft grippers that grasp the most delicate objects. Based on electrostatics, the adhesion forces are turned on and off by an electrical signal, promi ...

ELSEVIER2022

Conformable neural interfaces : from engineering stretchability at the micro-scale to translational applications

Florent-Valéry Coen

Recently, flexible and soft bioelectronic interfaces have been proposed as a solution to improve existing neural interfaces that currently present mechanical mismatch with the soft tissue. These are devices fabricated with thin polymeric or elastomeric bac ...

EPFL2022

Automated test setup to quantify the lifetime of dielectric elastomer actuators under a wide range of operating conditions

Herbert Shea, Fabio Beco Albuquerque, Djen Timo Kühnel, Valentin Colin Py

We present an automated test setup for the systematic performance and lifetime evaluation of dielectric elastomer actuators (DEAs). This setup, called the MAPLE setup, performs accelerated aging tests and allows quantifying how material choice, fabrication ...

IOP PUBLISHING LTD2021

3D Printed Motor-Sensory Module Prototype for Facial Rehabilitation

Jamie Paik, Amir Firouzeh, Matthew Aaron Robertson

This work demonstrates the first 3D printed wearable motor-sensory module prototype designed for facial rehabilitation, focusing on facial paralysis. The novelty of the work lies in the fast fabrication of the first fully soft working prototype, including ...

MARY ANN LIEBERT, INC2022

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Véronique Michaud, Baris Çaglar, Amaël Maximilien Cohades, Damiano Salvatori

The out-of-plane permeability of two glass fibre fabrics was measured by 26 institutions using silicone oil as a test fluid. Participants in this study were free to select the test procedure, specimen dimensions and data analysis method, provided that test ...

2021

Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin

Jürgen Brugger, Demetri Psaltis, Christophe Moser, Helena Van Swygenhoven, Eirini Kakkava, Lorenz Hagelüken, Georgia Konstantinou, Nikolaos Nianias, Jieping Wang

Additive manufacturing (AM) methods are being integrated in ceramics fabrication either as the main manufacturing tool or for auxiliary purposes. By using polymers, powders and preceramic formulated materials, AM techniques are pushing towards higher resol ...

2020

Increased electromechanical sensitivity of polysiloxane elastomers by chemical modification with thioacetic groups

Yee Song Ko

Chemically cross-linked polydimethylsiloxane (PDMS) elastomers have gained importance as a dielectric in elastic capacitor actuators, which elongate when electrically charged. Common PDMS elastomers have a dielectric permittivity of only about 3 and thus e ...

2020

Optimization of a Py-GC/MS method for silicone -based lubricants analysis

Christophe Roussel, Céline Burnier

Condom evidence can be analysed using several analytical techniques, such as FTIR, MALDI-MS or DART-TOF-MS, but the only one that was used on real samples for transfer and persistence studies in the context of sexual assault or rape cases was Py-GC/MS. How ...

2020

Influence of humidity, temperature and prestretch on the dielectric breakdown strength of silicone elastomer membranes for DEAs

Herbert Shea, Fabio Beco Albuquerque

Humidity, temperature and membrane prestretch influence the dielectric breakdown strength of elastomer membranes. These three factors thus also influence the maximum force and strain that dielectric elastomer actuators (DEAs) can generate, as the Maxwell p ...

IOP PUBLISHING LTD2020

Siloxane compounds in biogas from manure and mixed organic waste: Method development and speciation analysis with GC-ICP-MS

Christian Ludwig, Debora Foppiano, Mohamed Tarik

A novel method for the determination of linear and cyclic siloxane compounds (L2, L3, D3, D4, D5, and D6) in biogas was developed by combining gas chromatography (GC) with inductively coupled plasma mass spectrometry (ICP-MS). Using a continuous liquid que ...

2020

Integration of hybrid material systems in conformable neural interfaces

Florian Dylan Fallegger

Neural interfaces are devices that are implanted into the body and interface electrically with the central (CNS) or peripheral nervous system. They are inserted surgically for short periods of time or chronically to diagnose or treat several neural disease ...

EPFL2020

Design of High Permittivity Polysiloxane Elastomers for Dielectric Elastomer Transducers

Philip Horst Caspari

Dielectric elastomer transducers consist of a dielectric elastomer between two compliant electrodes. When the elastic capacitor is electrically charged, the dielectric elastomer elongates until a balance of elastic and electrostatic force is reached. Elect ...

EPFL2019