Publications associées à Perméabilité (matériau)

Co-Adsorption of Alcohols and Water in JUK-8 Studied Using Quasi-Equilibrated Thermodesorption

JUK-8 ([Zn(oba)(pip)]n, oba2- = 4,4 '-oxybis(benzenedicarboxylate), pip = 4-pyridyl-functionalized benzene-1,3-dicarbohydrazide) is a hydrolytically stable flexible metal-organic framework. Owing to its unusual adsorptive properties, JUK-8 can be considere ...

MDPI2024

Influence of pore-scale heterogeneity on the precipitation patterns in Microbially Induced Calcite Precipitation (MICP)

Ariadni Elmaloglou

The principle of tailoring material properties to improve the mechanical behaviour of soils through compaction or cement grouting dates to the 60s. The increasing trends of urbanization worldwide require new solutions for the development of resilient and s ...

EPFL2023

Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions

Véronique Michaud, Baris Çaglar, Guillaume Clément Broggi

Permeability measurements of engineering textiles exhibit large variability as no standardization method currently exists; numerical permeability prediction is thus an attractive alternative. It has all advantages of virtual material characterization, incl ...

2023

Hydro-Mechanical Characterization of a Shale by Unusually High-Pressure Oedometric Tests

Alessio Ferrari, Eleonora Crisci

The note presents selected results of an experimental campaign conducted with the aim to investigate the hydro-mechanical behaviour of a shale recovered at a depth of about 900 m below the ground. High-pressure oedometric tests were performed to investigat ...

Wei Wu, Universität für Bodenkultur2023

Elongated hydraulic fracture emerging from layers of alternating fracture toughness

Brice Tanguy Alphonse Lecampion, Carlo Peruzzo

Whether used to enhance the hydrocarbon production from low permeability rocks or to measure the minimum in-situ principal stress in rock formations, height growth of a hydraulic fracture above the formation of interest is a key metric for the design of su ...

2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Modeling the mechanics and rheology of porous and granular media: an elastoplastic continuum approach

Lars Kristoffer Uhlen Blatny

The complex mechanics of porous and granular media play a significant role in various industrial processes and natural phenomena. As an example, understanding the mechanics of how failure occurs, localizes and propagates in porous brittle solids under vari ...

EPFL2023

Durability Challenges of Low-Grade Calcined Clay Opposed to High-Volume Fly Ash in General Purpose Concrete

Karen Scrivener, Matea Flegar

With the decrease in availability of common supplementary cementitious materials (SCMs) such as fly ash in Europe, the search for appropriate SCMs should be dealt with locally. A com-bination of abundant low-grade calcined clay and limestone powder has pro ...

AMER SOC TESTING MATERIALS2023

Active microrheology in corrugated channels: Comparison of thermal and colloidal baths

Ignacio Pagonabarraga Mora

Hypothesis: The dynamics of colloidal suspension confined within porous materials strongly differs from that in the bulk. In particular, within porous materials, the presence of boundaries with complex shapes entangles the longitudinal and transverse degre ...

ACADEMIC PRESS INC ELSEVIER SCIENCE2022

Evaluating CO2 breakthrough in a shaly a caprock material: a multi-scale experimental approach

Lyesse Laloui, Eleni Stavropoulou

The potential of underground CO2 storage relies on the sealing efficiency of an overlaying caprock that acts as a geological barrier. Shales are considered as potential caprock formations thanks to their favourable hydro-mechanical properties. In this work ...

Nature Research2022

Applying the Principal Component Analysis for a deeper understanding of the groundwater system: case study of the Bacchiglione Basin (Veneto, Italy)

Andrea Rinaldo

In hydrogeology, it is often difficult to fully understand the hydraulic factors affecting the recharge of groundwater systems. Particularly, at a regional scale, the groundwater system can have different drivers depending on the considered area, i.e., soi ...

PAGEPRESS PUBL2022

Microfluidic study in a meter-long reactive path reveals how the medium’s structural heterogeneity shapes MICP-induced biocementation

Lyesse Laloui, Dimitrios Terzis, Ariadni Elmaloglou

Microbially induced calcium carbonate (CaCO3) precipitation (MICP) is one of the major sustainable alternatives to the artificial cementation of granular media. MICP consists of injecting the soil with bacterial- and calcium-rich solutions sequentially to ...

Nature Research2022

From coating flow patterns to porous body wake dynamics via multiscale models

Pier Giuseppe Ledda

Multiscale phenomena are involved in countless problems in fluid mechanics. Coating flows are known to exhibit a broad variety of patterns, such as wine tears in a glass and dripping of fresh paint applied on a wall. Coating flows are typically modeled und ...

EPFL2022

Seismic events miss important kinematically governed grain scale mechanisms during shear failure of porous rock

Edward Carlo Giorgio Andò

Catastrophic failure in brittle, porous materials initiates when smaller-scale fractures localise along an emergent fault zone in a transition from stable crack growth to dynamic rupture. Due to the rapid nature of this critical transition, the precise mic ...

Nature Portfolio2022

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

Karen Scrivener, Diana Londoño Zuluaga

The objective of this study is to analyse the mechanical and durability properties of a high-performance mortars based on low grade kaolin clay and the effect of electrical conductivity and pore microstructure on the chloride penetration resistance. A tota ...

ELSEVIER2022

Transport across thin membranes: Effective solute flux jump

François Gallaire, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna

A model to describe the transport across membranes of chemical species dissolved in an incompressible flow is developed via homogenization. The asymptotic matching between the microscopic and macroscopic solute concentration fields leads to a solute flux j ...

AIP Publishing2022

On the effect of a penetrating recirculation region on the bifurcations of the flow past a permeable sphere

François Gallaire, Pier Giuseppe Ledda, Giuseppe Antonio Zampogna, Matteo Ciuti

We study the flow past a permeable sphere modeled using homogenization theory. The flow through the porous medium is described by the Darcy law, in which the permeability quantifies the resistance for the fluid to pass through the microstructure. A slip co ...

AIP Publishing2021

In-series sample methodology for permeability characterization demonstrated on carbon nanotube-grafted alumina textiles

Véronique Michaud, Jacobus Gerardus Rudolph Staal, Baris Çaglar

In-plane permeability of small area (100 × 50 mm) alumina fiber woven fabrics grafted with aligned carbon nanotubes (CNT) was quantified by placing them in series with a glass mat of known permeability during a flow experiment. The methodology was first va ...

2021

Permeability properties of composite reinforcements

Véronique Michaud

Permeability is defined here from the equations of fluid flow through porous media. It represents, for composite reinforcements, a measure for their ease of impregnation by a fluid resin. Modeling of the saturated permeability tensor is presented using a h ...

Woodhead Publishing2021

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Véronique Michaud, Baris Çaglar, Amaël Maximilien Cohades, Damiano Salvatori

The out-of-plane permeability of two glass fibre fabrics was measured by 26 institutions using silicone oil as a test fluid. Participants in this study were free to select the test procedure, specimen dimensions and data analysis method, provided that test ...

2021